• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Wednesday, November 18, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Mining Waste UHPC Cuts Carbon by One Third While Curbing Shrinkage

by
November 18, 2026
in Technology
Reading Time: 6 mins read
0
Mining Waste UHPC Cuts Carbon by One Third While Curbing Shrinkage

Mining Waste UHPC Cuts Carbon by One Third While Curbing Shrinkage

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

Civil engineering researchers have demonstrated an integrated material design framework that repurposes two high-volume industrial mining by-products into lower-carbon ultra-high-performance concrete. Conventional formulations of this advanced cementitious composite rely on exceptionally high proportions of ordinary Portland cement clinker to achieve compressive strengths exceeding one hundred and twenty megapascals alongside superior durability. However, this heavy reliance on virgin binder induces substantial carbon dioxide emissions, elevated production expenditures, and severe early-age autogenous shrinkage caused by self-desiccation under very low water-to-binder ratios. Laboratory assessments confirmed that substituting twenty percent of the cement with gold tailings while externally incorporating four hundred kilograms per cubic meter of pre-wetted coal gangue ceramsite decreased production-stage global warming potential by 32.95 percent and lowered non-renewable energy demand by 31.34 percent compared to standard reference mixtures, while successfully converting detrimental autogenous shrinkage into late-age net volumetric expansion.

The physical rationale behind substituting clinker with mining waste stems from the fundamental hydration mechanics of ultra-high-performance concrete. Consequently, a non-negligible volume of unhydrated cement functions merely as an expensive micro-scale particulate filler rather than participating in long-term chemical hydration. Replacing this unreactive cement fraction with solid wastes presents an attractive pathway to reduce clinker consumption while maintaining granular skeleton density. In China, gold mining operations produce approximately 216 million tons of gold tailings annually, representing 17.84 percent of the nation’s total tailings discharge, yet their domestic recycling rate remains limited to 36.9 percent. Similarly, the accumulation of coal gangue from coal washing and extraction exceeds seven billion tons. Transforming sintered coal gangue into lightweight ceramsite aggregate provides an effective recycling route that simultaneously mitigates industrial accumulation and provides functional porous reservoirs inside dense cement matrices.

To establish a coherent particle framework without compromising fresh workability, the researchers implemented granular skeleton optimization using the modified Andreasen and Andersen particle packing model. Proportioned through least-squares algorithms in computational software, the design optimized dry ingredients along a continuous target grading curve defined by a distribution modulus of q equals 0.23, an established index for dense, low-porosity cementitious skeletons. The raw constituents included ordinary Portland cement with a specific surface area of 445 square meters per kilogram, silica fume with a specific surface area of 21.8 square meters per gram and a silicon dioxide content of 95.4 percent, two distinct sizes of quartz sand comprising 26 to 40 mesh and 325 mesh fractions, uncalcined gold tailings, and straight brass-coated steel fibers measuring 13.0 millimeters in length and 0.2 millimeters in diameter. Mathematical optimization maintained a fixed sand-to-binder mass ratio of 1.0 to 1.0 and a constant silica fume-to-binder mass ratio of 0.25 to prevent paste volume variations from confounding workability evaluations.

Detailed physical characterization showed that gold tailings possess a particle-size distribution comparable to ordinary Portland cement, as measured by standard gradation descriptors, justifying their role as a direct volumetric micro-filler. X-ray diffraction confirmed that the as-received, dried, and sieved tailings were dominated by crystalline quartz and muscovite without pozzolanic activation, behaving as low-reactivity mineral diluents. In contrast, the manufactured coal gangue ceramsite exhibited an apparent density of 1650 kilograms per cubic meter, a cylinder compressive strength of 20 megapascals, and a uniform particle size spanning 5 to 8 millimeters. To calibrate its internal reservoir capacity, laboratory measurements determined an open porosity of 18 percent by volume, a one-hour water absorption rate of 5.0 percent, and a twenty-four-hour saturation absorption rate of 8.5 percent. Prior to batching, the ceramsite underwent continuous submersion in water for twenty-four hours, followed by drainage and surface drying until reaching a strict saturated-surface-dry state verified by gravimetric tolerances within 0.2 percent.

Batching and specimen preparation followed rigorous standardized mixing sequences to guarantee homogeneous fiber dispersion and aggregate distribution. Dry powdered materials, quartz sand, and pre-wetted ceramsite were homogenized for two minutes in a mechanical mixer before receiving water pre-mixed with a polycarboxylate-based high-range water reducer possessing an approximate 30 percent water reduction capacity. Following three minutes of wet mixing, the straight steel fibers were introduced at a uniform dosage of 2.0 percent by volume and agitated for over two additional minutes. Test specimens were cast in rigid molds, compacted on a vibrating table, and sealed under controlled conditions at 20 degrees Celsius and over 95 percent relative humidity for twenty-four hours before demolding. Demolded specimens remained under identical curing parameters until reaching target testing milestones.

Evaluation of fresh rheology showed that incorporating both mining wastes systematically reduced workability. Standardized flow spread tests revealed that the unmodified reference mixture achieved an initial spread diameter of 590 millimeters. Successive replacements of cement with gold tailings at dosages of 10 percent, 20 percent, and 30 percent by mass induced progressive flow spread reductions of 0.5 percent, 11.02 percent, and 16.44 percent, respectively. Furthermore, when pre-wetted ceramsite was incorporated into the 20 percent gold tailings mixture at dosages of 200, 400, and 600 kilograms per cubic meter, flow spread dropped by an additional 1.33 percent, 6.67 percent, and 19.43 percent relative to the tailings-only baseline. This secondary slump loss arose from the angular, textured surface of the porous aggregate increasing interfacial mechanical friction while reducing the relative lubricating volume of surrounding paste.

Mechanical testing of hardened specimens revealed noticeable variations across different curing intervals. In the plain reference concrete, twenty-eight-day compressive strength reached 135.75 megapascals. Substituting cement with gold tailings resulted in strength decreases of 3.42 percent at 10 percent substitution, 12.76 percent at 20 percent substitution, and 20.01 percent at 30 percent substitution, where the 20 percent mixture achieved 118.43 megapascals. While the dense micro-filler effect of fine tailings partially counteracted clinker dilution at low volumes, higher replacement percentages led to diminished hydration product volume. However, the subsequent addition of saturated ceramsite to the 20 percent tailings mixture restored compressive resistance. Formulations with 200 and 400 kilograms per cubic meter of ceramsite achieved compressive strength increases of 1.86 percent and 2.76 percent, respectively, bringing the twenty-eight-day compressive strength of the balanced mixture to 121.70 megapascals. At an excessive dosage of 600 kilograms per cubic meter, aggregate crowding and thin paste coverage capped the compressive gain at 0.98 percent.

Unlike compressive resilience, flexural strength exhibited consistent reductions across all modified formulations. The control mixture recorded an average twenty-eight-day flexural capacity of 30.26 megapascals, reflecting efficient fiber bridging across micro-cracks. As gold tailings substitution rose to 10, 20, and 30 percent, flexural resistance dropped by 2.84 percent, 9.58 percent, and 18.77 percent, respectively, yielding 27.36 megapascals for the 20 percent replacement baseline due to diminished matrix cohesion. When saturated ceramsite was added at 200, 400, and 600 kilograms per cubic meter, flexural strengths declined further by 4.75 percent, 10.34 percent, and 14.73 percent relative to the tailings control, with the balanced composite achieving 24.53 megapascals. Microstructural inspections revealed that ceramsite introduced weaker interfacial transition zones and occupied matrix volume that disrupted uniform spatial distribution of steel fibers, occasionally promoting fiber balling. Consequently, structural applications dominated by pure bending or tension, such as thin bridge deck overlays, must carefully limit ceramsite content to maintain post-cracking ductility.

Continuous monitoring of sealed prism specimens measuring 100 by 100 by 515 millimeters demonstrated marked improvements in autogenous deformation control. Standard non-contact shrinkage frames tracked longitudinal strain from the moment of initial setting under isothermal conditions of 20 degrees Celsius. In the unmodified control, rapid self-desiccation caused severe internal capillary depression and rapid contraction during the first twenty-four hours. Incorporating gold tailings suppressed autogenous shrinkage by 9.99 percent at 10 percent replacement, 39.30 percent at 20 percent replacement, and 51.44 percent at 30 percent replacement. This shrinkage reduction occurred because inert tailings reduced overall hydration intensity, leaving more unconsumed capillary water in the pore structure. More dramatically, combining saturated ceramsite with a calcium sulfoaluminate and calcium oxide expansive agent transformed the deformation curve.

Microstructural examination and environmental safety assays confirmed the physical integrity and non-hazardous character of the modified matrix. Scanning electron microscopy using a field-emission instrument revealed that while the 20 percent tailings mixture exhibited minor microcracking due to localized water absorption around unreactive quartz grains, the ceramsite interface displayed dense interlocking. Ceramsite particles possessed open honeycomb pores spanning 1 to 20 micrometers that were thoroughly infiltrated by calcium silicate hydrate gel, ettringite crystals, and calcium hydroxide plates, creating a tightly bonded interfacial transition zone. Concurrently, environmental leaching toxicity tests following horizontal oscillation procedures with acidic and neutral leachants demonstrated exceptional heavy metal immobilization. Inductively coupled plasma optical emission spectrometry measured leachate concentrations of manganese at or below 0.0275 milligrams per liter and barium at or below 0.2356 milligrams per liter. These values represented between 0.08 percent and 1.38 percent of national regulatory thresholds, verifying that heavy metals remain stably encapsulated within the hydrated silicate matrix.

Comprehensive cradle-to-gate life cycle modeling demonstrated substantial ecological gains per cubic meter of finished material. Using background life cycle inventories and midpoint environmental indicators, the assessment accounted for raw material extraction, synthetic ceramsite manufacturing, mechanical processing, and admixture synthesis up to the factory boundary. For the optimal balanced composite containing 20 percent tailings and 400 kilograms per cubic meter of ceramsite, global warming potential dropped by 32.95 percent, non-renewable primary energy demand decreased by 31.34 percent, renewable energy input declined by 32.23 percent, acidification potential fell by 27.10 percent, and eutrophication potential was reduced by 20.90 percent compared to standard reference concrete. Sensitivity analyses confirmed these environmental advantages remained robust even when allocating up to 10 percent of upstream mining and beneficiation burdens directly to the gold tailings. The authors concluded that while structural designers must verify restrained expansion through future ring tests to prevent unexpected internal stresses, this dual-waste strategy successfully establishes a practical route toward sustainable, low-shrinkage ultra-high-performance concrete.

Subject of Research: Sustainable ultra-high-performance concrete incorporating gold tailings and coal gangue ceramsite

Article Title: Lower-carbon UHPC incorporating gold tailings and coal gangue ceramsite: strength, shrinkage, and environmental performance

Article References: Li, C., Li, J., Deng, S., Zeng, Z., & Dong, J. (2026). Lower-carbon UHPC incorporating gold tailings and coal gangue ceramsite: strength, shrinkage, and environmental performance. Low-carbon Materials and Green Construction, 4(1), Article 14. https://doi.org/10.1007/s44242-026-00110-3

Image Credits: AI Generated

DOI: 10.1007/s44242-026-00110-3

Keywords: ultra-high performance concrete, gold tailings, coal gangue ceramsite, internal curing, autogenous shrinkage, supplementary cementitious materials, industrial solid waste, life cycle assessment, global warming potential, particle packing, compressive strength, flexural strength, heavy metal leaching, microstructure, scanning electron microscopy, clinker reduction, sustainable construction

News Source: Denise Maddox. (November 18, 2026). Mining Waste UHPC Cuts Carbon by One Third While Curbing Shrinkage. Scienmag.

Tags: autogenous shrinkageclinker reductioncoal gangue ceramsitecompressive strengthflexural strengthglobal warming potentialgold tailingsheavy metal leachingindustrial solid wasteinternal curinglife cycle assessmentmicrostructureparticle packingscanning electron microscopysupplementary cementitious materialssustainable constructionultra-high-performance concrete
Share12Tweet7Share2ShareShareShare1

Related Posts

Asphalt Paving Block Thickness and Rubber Grain Size Determine Structural Load Capacity

Asphalt Paving Block Thickness and Rubber Grain Size Determine Structural Load Capacity

November 18, 2026
Core-Shell Zinc Oxide and Bismuth Sulfide Photoanodes Boost Solar Hydrogen Production

Core-Shell Zinc Oxide and Bismuth Sulfide Photoanodes Boost Solar Hydrogen Production

November 18, 2026

Moving Reflective Targets Enable Online Multi-LiDAR Calibration in Sparse Maritime Environments

November 18, 2026

Federated Deep Learning Framework Secures Connected Devices Against Multi-Vector Cyber Attacks

November 18, 2026

POPULAR NEWS

  • T Cell Depletion Protects Dopaminergic Neurons After Head Injury in Mice

    T Cell Depletion Protects Dopaminergic Neurons After Head Injury in Mice

    29 shares
    Share 12 Tweet 7
  • Ear-Based Nerve Stimulation Shows Preliminary Cognitive Benefits in Spinal Cord Pilot

    29 shares
    Share 12 Tweet 7
  • Visuospatial Memory Game Reveals Interpretable Behavioral Profiles in Children With ADHD

    29 shares
    Share 12 Tweet 7
  • Core-Shell Zinc Oxide and Bismuth Sulfide Photoanodes Boost Solar Hydrogen Production

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Asphalt Paving Block Thickness and Rubber Grain Size Determine Structural Load Capacity

Targeted Biomarker Phenotyping Guides Recurrent Preschool Wheezing Care in Expert Consensus

Digital Health Access Linked to Calorie Information Use in Prepared Meals

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 88 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.