Published in Discover Chemical Engineering, the study provides a direct comparison of the intrinsic reaction rates for fresh and used sorbents, addressing a significant gap in the long-term kinetic data required for designing durable carbon capture systems. The work demonstrates that while the fundamental nucleation-and-growth mechanism for CO2 adsorption remains stable, the energetic barrier for the reaction decreases significantly after initial cycling, suggesting a form of kinetic activation in the sorbent material.
The investigation utilized a custom-built thermogravimetric analyzer to monitor the weight variations of CaO samples as they reacted with CO2 and were subsequently regenerated using hydrogen gas. By alternating between CO2 and H2 gases in each loop, the team simulated the calcium looping process, where CaO reacts with CO2 to form calcium carbonate (CaCO3) and is then converted back to CaO via a hydrogen-mediated reduction reaction that produces carbon monoxide and steam.
The CaO powder used in the study was sourced from Sirjan mines in Iran, with a purity exceeding 98% and an average particle size of 80 micrometers. X-ray diffraction and fluorescence analyses confirmed the crystalline and elemental composition of the material, identifying minor impurities such as phosphor, silicon oxides, and aluminum oxides. The experimental design included preliminary validation tests to ensure that the measured reaction rates were governed by intrinsic chemical kinetics rather than mass transfer limitations. By varying the sample mass and gas flow rates, the researchers confirmed that external and inter-particle diffusion effects were negligible under the chosen standard conditions of 4 grams of sample and a 100 mL/min gas flow.
Kinetic analysis was performed using both model-fitting and model-free methods to ensure robustness and validate the identified reaction mechanisms. For the CO2 adsorption by both fresh and used CaO, the Avrami-Erofeyev second-order model provided the best fit to the experimental data. This model describes a process where the reaction proceeds via the random formation of CaCO3 nuclei on the CaO surface, followed by their growth. The consistency of this model across both fresh and cycled sorbents indicates that the core mechanistic pathway for carbonation does not change over the 25 cycles, despite the physical degradation of the material.
A critical finding of the study is the reduction in the activation energy for CO2 adsorption on used CaO. The activation energy for fresh CaO was determined to be approximately 1.25 × 10^8 J/kmol, whereas for the used sorbent, it decreased to 7.93 × 10^7 J/kmol. This represents a reduction of nearly 50%, implying that the adsorption process becomes more spontaneous after the sorbent has undergone several cycles. The researchers attribute this decrease to morphological evolution, where initial sintering and pore structure reorganization create a more stable and accessible pore network, thereby reducing diffusion limitations and making reactive sites more readily available for CO2.
In contrast to the carbonation step, the regeneration of CaCO3 back to CaO using hydrogen exhibited a shift in the rate-controlling mechanism. For fresh CaCO3, the zero-order reaction model provided the best fit, suggesting a constant decomposition rate limited by the instantaneous surface area. However, for the used CaCO3, the Avrami-Erofeyev third-order model, which assumes three-dimensional nuclei growth, was the optimal descriptor. This shift indicates that after cycling, the regeneration process is no longer a simple surface reaction but is controlled by the nucleation and growth of CaO phases within the CaCO3 matrix, likely due to changes in particle morphology and the distribution of the carbonate phase.
Despite the change in the kinetic model for regeneration, the activation energies for the fresh and used CaCO3 remained similar, hovering around 1.0 × 10^8 J/kmol. This stability in the energy requirement for regeneration underscores the robust recyclability of the sorbent from an energetic standpoint. The hydrogen-driven regeneration proceeded to completion in each cycle, confirming the feasibility of this alternative regeneration route, which offers the potential to convert captured CO2 into a valuable syngas precursor while potentially lowering the energy penalty associated with traditional high-temperature calcination.
The study also documented the progressive deactivation of the CaO sorbent over the 25 cycles. The carbonation conversion decreased with each successive cycle, a trend consistent with well-documented deactivation mechanisms such as sintering and the loss of microporous surface area. The rate of this deactivation was more pronounced at higher temperatures, with the carbonation peaks diminishing more rapidly at 973 K compared to 873 K. This observation aligns with the known effect of accelerated sintering at elevated temperatures, which reduces the number of active sites and increases diffusion resistance within the sorbent particles.
While the carbonation capacity and kinetics degraded over time, the regeneration phase consistently returned the material to a similar baseline weight at each cycle. This supports the kinetic finding that the regeneration step remains robust in terms of completing the reaction back to CaO, even as the material’s structure changes. The decoupling of these trends suggests that deactivation is primarily morphological rather than electronic, as the intrinsic energy barrier for breaking the CaCO3 bond remains unchanged while the surface area and pore structure evolve.
The authors emphasize that the obtained activation energies represent effective values for the specific particle size and experimental configuration used in the TGA. While steps were taken to minimize bulk diffusion effects, the influence of product-layer diffusion, especially at higher conversions, is inherently captured in the kinetic model fitting. The strong agreement between the model-fitting and model-free methods validates the reliability of the kinetic analysis, providing a detailed dataset that is essential for optimizing the long-term performance of CaO-based carbon capture technologies.
This work highlights the importance of understanding the kinetic evolution of sorbents over extended cycles for the development of efficient and durable carbon capture systems. The findings suggest that sorbent activation during initial cycles could be beneficial for capture kinetics without compromising regenerability. Future research should couple such kinetic analysis with direct structural characterization techniques, such as scanning electron microscopy and BET surface area analysis, to definitively link the evolution of kinetic parameters to specific microstructural changes, guiding the design of more resilient synthetic sorbents for industrial applications.
The evaluation addresses operational trade-offs across common capture materials highlighted in the study. Liquid amine solutions typically achieve capacities between 1 and 2 moles of carbon dioxide per kilogram at low temperatures between 40 and 60 degrees Celsius, but they suffer from solvent degradation and substantial energy demands for regeneration. Solid physisorbents such as zeolites and activated carbons function near ambient conditions, yet they exhibit limited selectivity and reduced capacity in humid flue gas. By contrast, calcium oxide chemisorbents provide a high theoretical capacity of 17.8 moles per kilogram and operate efficiently in high-temperature streams between 600 and 700 degrees Celsius. While conventional calcium looping relies on calcination to release concentrated carbon dioxide, the hydrogen pathway offers an alternative conversion route. In the investigated process, hydrogen-driven regeneration reacts with calcium carbonate to yield calcium oxide, steam, and carbon monoxide. Generating carbon monoxide provides a valuable synthesis gas precursor in a single operational step, linking capture directly with carbon utilization while potentially reducing the energy penalty of standard thermal calcination.
Detailed hardware specifications ensured precise operational tracking throughout the cycling runs. The custom thermogravimetric setup housed a vertical quartz tube measuring 15 centimeters in inner diameter inside an electric furnace, using high-purity gases rated at 99.999 percent purity. A small ceramic crucible hung from a nickel-chrome wire connected to a digital scale accurate to 1 milligram, while three gas flow meters tracked volumetric rates. Heating proceeded at a controlled rate of 20 Kelvin per minute toward target test temperatures, monitored simultaneously by two thermocouples placed inside near the crucible and outside the reactor vessel. Following each experimental run, gas flow was stopped and solid residues were discharged under an inert atmosphere before being sealed inside vacuum containers to prevent unwanted ambient exposure.
Specific kinetic fitting parameters further illustrated the mechanistic distinctions governing each reaction phase. In the carbonation stage, the nucleation and growth model yielded an order degree of 2.273 for fresh calcium oxide and 1.935 for cycled material, closely matching the second-order Avrami-Erofeyev formulation. During the regeneration of fresh calcium carbonate, model-free analysis revealed that the activation energy remained low before conversion reached 0.3, after which it fluctuated between 80 million and 100 million joules per kilomole. This variation indicates that initial decomposition dynamics differ markedly from the subsequent bulk reaction. For cycled calcium carbonate, the nucleation and growth model produced an order degree of 3.097, corroborating the three-dimensional growth assumed by the third-order Avrami-Erofeyev model. In contrast to other models with only two parameters, the three-parameter nucleation framework provided enhanced accuracy across varying conversions. Thermogravimetric measurements also recorded a subtle upward drift in baseline weight across all temperatures, reflecting a gradual accumulation of non-regenerable material or minor incomplete decomposition over extended cycles.
Subject of Research: Kinetic evolution of CaO sorbents during CO2 capture and H2 regeneration
Article Title: Understanding the kinetics of CO2 capture and regeneration by CaO sorbents over extended cycles
Article References: Najminoori, M., Abolpour, B., Abbaslou, H., Yarahmadi, H., & Shamsoddini, R. (2026). Understanding the kinetics of CO2 capture and regeneration by CaO sorbents over extended cycles. Discover Chemical Engineering, 6(1), Article 16. https://doi.org/10.1007/s43938-026-00117-z
Image Credits: AI Generated
DOI: 10.1007/s43938-026-00117-z
Keywords: CO2 capture, Calcium looping, CaO sorbent, Kinetics, Hydrogen regeneration, Carbon capture, Thermogravimetric analysis, Sorbent deactivation, Understanding, capture, regeneration, sorbents
News Source: Bethany Barker. (November 12, 2026). Cycled Calcium Oxide Sorbents Show Altered CO2 Capture Kinetics. Scienmag.



