Researchers have engineered a visible-light-responsive heterojunction photocatalyst by coupling copper oxide with graphitic carbon nitride, achieving an 84.8 percent degradation efficiency of the persistent antibiotic cefotaxime in aqueous solution within 75 minutes under natural sunlight. Synthetic pharmaceutical residues represent an intensifying environmental crisis across global aquatic ecosystems due to their structural durability, acute and chronic ecotoxicity, and dangerous capacity to accelerate antimicrobial resistance among microbial communities. Discharged predominantly through municipal wastewater treatment plant effluents, hospital drainage streams, and industrial manufacturing facilities, pharmaceuticals encompass broad categories of analgesics, anti-inflammatory compounds, and antibiotics. Cefotaxime, a widely prescribed third-generation cephalosporin, frequently enters surface waters and wastewater streams where residual concentrations have been documented to exceed 300 milligrams per liter. Conventional secondary wastewater facilities fail to eliminate such complex synthetic agents because their resilient structures resist microbial biodegradation, prompting researchers to develop solar-driven advanced oxidation platforms capable of purifying contaminated water matrices efficiently.
This sophisticated stereochemical arrangement imparts broad-spectrum antibacterial activity against both Gram-positive and Gram-negative pathogens, but simultaneously prevents complete biodegradation during biological treatment steps. Furthermore, incomplete breakdown yields intermediate transformation products that may display unpredictable environmental toxicity. Advanced oxidation processes address these limitations by generating short-lived reactive oxygen species directly on catalyst surfaces under energetic excitation. In particular, non-selective hydroxyl radicals possess exceptionally high standard oxidation potentials capable of cleaving aromatic rings and mineralizing persistent pollutants into benign end products such as water, carbon dioxide, and mineral salts without requiring chemical oxidants or hazardous auxiliary reagents.
Semiconductor photocatalysis relies on the absorption of light photons whose energy matches or exceeds the bandgap of a solid catalyst, generating excited electron-hole pairs that migrate to surface catalytic sites. Graphitic carbon nitride has attracted intense scientific scrutiny as an environmentally friendly, metal-free, nitrogen-rich polymeric semiconductor whose extended pi-conjugated network consists of repeating triazine or heptazine heterocyclic units linked through bridging nitrogen atoms. Compared to conventional graphitic carbon nitride materials, the nitrogen-enriched carbon nitride matrix exhibits an altered electronic configuration, wherein lone-pair nitrogen states and carbon antibonding orbitals narrow the optical bandgap to between 1.5 and 2.2 electron volts. This reduced energetic threshold extends light absorption into the red portion of the visible spectrum. However, pristine carbon nitride suffers from rapid recombination of photogenerated charge carriers and limited redox driving forces. To resolve these deficiencies, the researchers paired the material with copper oxide, an inorganic p-type semiconductor possessing a narrow bandgap between 1.2 and 1.7 electron volts.
To synthesize the composite material, the investigative team executed a multistage chemical fabrication procedure. Bulk nitrogen-rich carbon nitride powder was prepared by blending five grams of 3-amino-1,2,4-triazole with five grams of ammonium chloride, followed by thermal calcination at 550 degrees Celsius for three hours at a heating rate of 10 degrees Celsius per minute. The resulting dark brown powder was exfoliated into nanosheets through potassium bromide-assisted ultrasonication, dispersing 0.6 grams in 100 milliliters of 10-millimolar solution for two hours, followed by centrifugation at 8000 revolutions per minute, washing, and drying. Separately, copper oxide nanoparticles were precipitated by adding 0.2-molar sodium hydroxide dropwise into 1000 milliliters of water containing eight grams of dissolved copper nitrate trihydrate at 60 degrees Celsius under ultrasonic stirring before oven-drying at 80 degrees Celsius. Finally, the heterojunction was constructed by suspending carbon nitride nanosheets in copper acetate solution under ultrasonication, followed by freeze-drying and calcination at 500 degrees Celsius for two hours.
Structural characterization confirmed the formation of a phase-pure heterostructure possessing intimate interfacial contact between the two constituent semiconductors. Powder X-ray diffraction patterns of pristine carbon nitride exhibited characteristic reflections at two-theta values of 13.0 degrees and 27.4 degrees, corresponding to the (100) plane of in-plane structural periodicity and the (002) plane representing aromatic interlayer stacking through pi-pi interactions. Pure copper oxide displayed distinctive diffraction peaks matching the monoclinic crystalline phase cataloged in standard crystallographic databases. In the composite diffraction profile, characteristic reflections from both materials were retained without extraneous impurity signals, confirming structural integrity. Notably, the carbon nitride (100) peak intensity diminished substantially, reflecting partial exfoliation and strong interfacial electronic coupling. Applying the Scherrer equation yielded average crystallite dimensions of 7.26 nanometers for pristine carbon nitride, 22.9 nanometers for copper oxide, and 12.6 nanometers for the synthesized composite, accompanied by an interplanar spacing measurement of 0.33 nanometers between the adjacent crystalline phases.
Spectroscopic analyses validated the chemical bonding framework and altered electronic band characteristics of the engineered heterostructure. Fourier-transform infrared spectroscopy of pristine carbon nitride revealed characteristic vibrational bands between 1200 and 1700 inverse centimeters associated with the skeletal stretching of sp2-hybridized carbon-nitrogen bonds, complemented by triazine ring breathing vibrations near 800 inverse centimeters and amine-hydroxyl stretching at 3100 to 3400 inverse centimeters. Copper oxide spectra exhibited distinctive copper-oxygen lattice vibrations below 700 inverse centimeters. In the composite, these vibrational signatures were preserved, verifying the physical presence of both components. Ultraviolet-visible diffuse reflectance spectroscopy demonstrated that coupling copper oxide with carbon nitride produced an absorption edge shift toward longer wavelengths and elevated visible-light absorption across the entire spectrum. Kubelka-Munk Tauc plots showed that the pristine carbon nitride bandgap of 1.9 electron volts and copper oxide bandgap of 1.6 electron volts narrowed to an effective optical bandgap of 1.4 electron volts in the composite, while electron microscopy confirmed a rough, heterogeneous particulate morphology offering abundant active surface sites for catalytic interactions.
Photocatalytic evaluation was conducted by dispersing 0.02 grams of catalyst into 20 milliliters of aqueous solution containing 20 milligrams per liter of cefotaxime under natural sunlight, continuously tracked using a calibrated digital illuminance meter. Prior to light exposure, the reaction suspension was stirred in complete darkness for 15 to 20 minutes to achieve adsorption-desorption equilibrium, ensuring that pollutant molecules occupied active catalytic surface sites without premature photochemical transformation. Upon sunlight exposure, degradation progress was monitored spectrophotometrically by recording the attenuation of the prominent cefotaxime absorption peak located at 235 nanometers at 15-minute intervals. Systematic evaluation across a pH range spanning 2 to 10 demonstrated that photocatalytic removal peaked at 84.7 to 84.8 percent at pH 4. Performance declined sharply under alkaline conditions, dropping systematically as pH increased to 10. The catalyst exhibited a point of zero charge of 3.05, establishing that at pH 4 its surface carried a net negative charge, optimizing electrostatic interactions with zwitterionic cefotaxime molecules to accelerate photo-oxidation.
Kinetic analyses revealed that cefotaxime photo-oxidation followed the Langmuir-Hinshelwood model governed by pseudo-first-order reaction kinetics, as confirmed by linear logarithmic concentration plots displaying correlation coefficients approaching unity. Investigating catalyst dosage demonstrated that removal efficiency rose progressively from 58.8 percent at a concentration of 0.005 grams per liter to 61.8 percent at 0.01 grams per liter, before attaining an optimal value of 84.8 percent at 0.02 grams per liter. Elevating catalyst loading further to 0.06 and 0.08 grams per liter caused the efficiency to decrease to 78.9 percent and 71.7 percent, respectively. This performance decline at excessive solid loadings was attributed to nanoparticle agglomeration and elevated suspension turbidity, which obstructed photon penetration through the liquid volume and decreased effective light harvesting. In cyclic stability assessments involving four successive degradation runs under natural solar exposure, the composite maintained nearly identical decomposition curves, demonstrating that the catalyst possesses exceptional durability and reusability without perceptible loss of functional photo-oxidation capability.
To identify the reactive oxygen species governing catalytic degradation, the investigators performed radical trapping experiments using selective chemical scavengers. Adding isopropyl alcohol, a specific scavenger of hydroxyl radicals, triggered the most severe inhibition, plunging cefotaxime degradation efficiency from 84.8 percent to 27.9 percent. These quantitative reductions demonstrate that hydroxyl radicals serve as the dominant oxidizing agent driving contaminant breakdown, with secondary contributions from superoxide radicals.
High-resolution mass spectrometry using electrospray ionization in positive mode provided detailed chemical insight into the multi-stage transformation cascade of cefotaxime. While the intact parent ion at mass-to-charge ratio 455 was suppressed due to surface adsorption, the spectrometer detected distinctive degradation intermediates that mapped the progressive decomposition of the pharmaceutical structure. An intermediate detected at mass-to-charge ratio 388 corresponded to lactonisation of the antibiotic molecule. Subsequent amide bond hydrolysis yielded an intermediate at ratio 276, which underwent further hydrolysis of the beta-lactam core to generate an intermediate at ratio 293. Side-chain ester and acetyl cleavage produced a distinct fragment at ratio 250, reflecting open-ring cleavage of the reactive bicyclic nucleus. Subsequent post-reaction X-ray diffraction analysis revealed no alterations in characteristic crystalline diffraction peaks, confirming that the crystalline composite retains remarkable structural integrity during sustained environmental water remediation.
Subject of Research: Visible-light photocatalytic degradation of cefotaxime antibiotic using a CuO/g-C3N5 heterojunction composite
Article Title: Visible light driven photocatalytic degradation of cefotaxime using a g-C3N5/CuO composite
Article References: Biswal, S., Samal, M., Achary, P. G. R., & Nanda, B. (2026). Visible light driven photocatalytic degradation of cefotaxime using a g-C3N5/CuO composite. Discover Catalysis, 3(1), Article 23. https://doi.org/10.1007/s44344-026-00053-8
Image Credits: AI Generated
DOI: 10.1007/s44344-026-00053-8
Keywords: cefotaxime, CuO/g-C3N5, graphitic carbon nitride, copper oxide, photocatalysis, visible light degradation, Z-scheme heterojunction, advanced oxidation processes, hydroxyl radicals, antibiotic residues, pharmaceutical wastewater, point of zero charge, Langmuir-Hinshelwood kinetics, ultrasonic exfoliation, high-resolution mass spectrometry, catalyst reusability, bandgap engineering, diffuse reflectance spectroscopy
News Source: Bethany Barker. (November 17, 2026). Copper Oxide Composite Breaks Down Antibiotic Pollutant Under Natural Sunlight. Scienmag.



