Chemically modified cellulose materials functionalized with linear aliphatic amines can effectively catalyze the synthesis of coumarins under solvent-free conditions, according to an experimental and computational investigation published in Results in Chemistry. Researchers synthesized and evaluated three solid aminocellulose catalysts—termed CEDA, CETA, and CTA—by modifying microcrystalline cellulose through an initial tosylation step followed by nucleophilic displacement with ethylenediamine, diethylenetriamine, and N,N′-bis(2-aminoethyl)-1,3-propanediamine, respectively. The resulting materials were tested in the one-step Knoevenagel condensation and subsequent intramolecular cyclization between substituted 2-hydroxybenzaldehydes and ethyl acetoacetate to produce 3-acetylcoumarin derivatives. Operating without organic reaction solvents at a moderate temperature of 80 °C, the catalytic system achieved conversion levels up to 100 percent for reactive substrates while reducing the environmental impact factor, or E-factor, to values between 1 and 2, contrasting sharply with the heavy waste generation characteristic of conventional homogeneous routes.
Coumarins possess a core benzopyrone structure widely distributed across plant species and represent essential structural frameworks in medicinal chemistry for anticoagulant, anti-inflammatory, and antimicrobial agents, as well as therapeutic candidates for cancer and thrombosis. Historically, the industrial manufacture of coumarin backbones has relied extensively on the Knoevenagel condensation carried out under homogeneous catalysis using non-renewable bases such as piperidine, volatile organic solvents like ethanol or 1,4-dioxane, or mineral acids and metals. These conventional liquid-phase procedures typically suffer from high E-factors, generating significant quantities of solvent waste and requiring energy-intensive purification sequences to separate homogeneous catalysts and neutralization salts from desired organic products. To address these operational drawbacks, researchers have increasingly directed attention toward solid, recoverable heterogeneous catalysts derived from renewable bio-based polymers, exploring platforms such as chitosan, tendon hydrolysates, and functionalized cellulosic supports that can simplify downstream isolation.
To produce the heterogeneous catalysts evaluated in the study, the research team dissolved oven-dried microcrystalline cellulose in a solvent system containing anhydrous N,N-dimethylacetamide and lithium chloride. The dissolved biopolymer was tosylated using tosyl chloride in the presence of anhydrous triethylamine, yielding a powdered tosyl cellulose intermediate designated as TsCel with a sulfur content of 3.62 percent by weight. Subsequent nucleophilic substitution of the tosyl groups was carried out in anhydrous dimethylacetamide suspensions at 85 °C for 6 h using 15 mmol portions of the selected amine ligands. Following reaction, the solid aminocellulose derivatives were separated by filtration, rinsed with anhydrous ethanol and diethyl ether, and vacuum-dried. The sulfur content of the resulting CEDA, CETA, and CTA solids decreased to approximately 0.89 to 0.99 percent, confirming the displacement of tosylate moieties, while total nitrogen loadings reached 2.48 percent for CEDA, 3.3 percent for CETA, and 4.2 percent for CTA, reflecting the increasing number of nitrogen atoms across the respective amine ligand backbones.
Structural and surface characterization of the modified biopolymers confirmed both covalent functionalization and retention of the underlying polysaccharide backbone. Attenuated total reflection Fourier-transform infrared spectroscopy revealed characteristic absorption bands between 1650 and 1560 cm⁻¹ associated with primary amine scissoring vibrations, primary amine C–N stretching bands between 1250 and 1020 cm⁻¹, and secondary amine C–N stretches from 1180 to 1130 cm⁻¹, alongside residual weak bands near 682 cm⁻¹ that indicated a fraction of untransformed tosyl groups. Quantitative solid-state carbon-13 nuclear magnetic resonance spectroscopy, employing relative integral comparisons against the cellulosic C-1 anomeric carbon resonance at 100 to 110 ppm, established degrees of substitution of 10 percent for CEDA, 12 percent for CETA, and 3.9 percent for CTA. These substitution metrics corresponded to the incorporation of approximately one amine ligand chain for every 10, 8.3, and 25.6 anhydroglucose structural units along the cellulose polymer framework.
Optimization trials focused on establishing the most favorable reaction parameters using the ethylenediamine-derived catalyst CEDA alongside the benchmark low-reactivity substrate 2-hydroxybenzaldehyde and ethyl acetoacetate. Control experiments without any catalyst or using unmodified microcrystalline cellulose yielded no detectable coumarin product after 24 h at 80 °C. Systematic variations revealed that optimal conversion of 90.9 percent was achieved in solvent-free conditions using an equimolar reactant ratio, a catalyst loading equivalent to 10 mol percent total nitrogen relative to the aldehyde, a temperature of 80 °C, and a reaction time of 24 h. Lowering the reaction temperature to 40 °C reduced conversions to between 28.0 and 34.5 percent even with extended run times of 48 h or the addition of solvents such as N,N-dimethylformamide or ethanol. Introducing solvents at 80 °C or adding excess ethyl acetoacetate did not improve conversions beyond the neat mixture, highlighting the practical efficiency of solvent-free, stoichiometric operation.
When applied across a panel of substituted 2-hydroxybenzaldehydes, the catalytic efficiency of CEDA proved strongly sensitive to the electronic properties and positions of aromatic substituents. Aldehydes functionalized with electron-withdrawing groups exhibited accelerated reaction rates: the highly reactive model compound 2-hydroxy-5-nitrobenzaldehyde achieved complete conversion of 100 percent within 12 h under solvent-free conditions at 80 °C, yielding 51.4 percent of isolated 3-acetyl-6-nitro-2H-chromen-2-one following recrystallization from ethanol. Similarly, 2-hydroxy-4-nitrobenzaldehyde reached 62.5 percent conversion. In contrast, substrates bearing electron-donating groups demonstrated diminished reactivity, as 2-hydroxy-4-methoxybenzaldehyde and 2-hydroxy-5-methylbenzaldehyde gave conversions of only 27.0 to 28.6 percent under standard 24-h conditions, though extending the reaction time to 72 h for 2-hydroxy-5-methoxybenzaldehyde raised isolated yield to 44.5 percent. Halogenated derivatives displayed intermediate conversions that depended on regiochemistry, with chloro- and bromo-substitutions at the 3-position displaying lower conversion rates than their 5-position counterparts due to localized steric and electronic hindrances.
Direct catalytic comparisons among CEDA, CETA, and CTA underscored that amine chain architecture dictates catalytic efficacy. For the 24-h condensation of 2-hydroxybenzaldehyde with ethyl acetoacetate at 80 °C, CEDA afforded 91 percent conversion and a 54 percent isolated product yield, whereas CTA yielded 77 percent conversion and 56 percent isolated yield, and CETA produced 46 percent conversion with a 19 percent yield. In trials employing 2-hydroxy-5-nitrobenzaldehyde over 12 h, CEDA reached 100 percent conversion with a 51 percent yield, CTA achieved 77 percent conversion with a 40 percent yield, and CETA reached 83 percent conversion with a 41 percent yield. Across both substrate series, CEDA systematically outperformed the more extended polyamine derivatives under identical active-nitrogen equivalents, leading the authors to select CEDA as the primary catalyst for detailed mechanistic, environmental, and stability evaluations.
In reactions employing 2-hydroxy-5-nitrobenzaldehyde, monitoring revealed the transient accumulation of two distinct reaction byproducts identified by proton NMR as chromene A and chromene B. Detailed stereochemical tracking indicated that the condensation yields isomeric (E) and (Z) olefinic Knoevenagel adducts, which subsequently undergo intramolecular ring closure. Density functional theory calculations confirmed that the (Z)-isomer of the adduct is slightly more stable than the (E)-isomer by 3 to 4 kJ mol⁻¹. Intramolecular cyclization of the (Z)-adduct generates coumarin through an entropically driven, thermodynamically favored pathway with an overall free energy change of ΔG = −44 kJ mol⁻¹ when R = NO₂ and ΔG = −52 kJ mol⁻¹ when R = H. Conversely, cyclization of the (E)-adduct produces chromene A with ΔG = −17 kJ mol⁻¹ (or −16 kJ mol⁻¹ for R = H). At lower reaction temperatures of 20 to 40 °C, coumarins and chromenes formed in comparable proportions, but increasing the operating temperature to 80 °C and extending reaction times shifted product distribution decisively toward the thermodynamic coumarin sink. When ethanol was introduced as a solvent at 80 °C, solvolysis generated chromene B through ethoxy displacement of the chromene A hydroxyl group.
To elucidate the underlying molecular pathways, researchers carried out quantum chemical calculations using the ORCA package at the ωB97M-D3(BJ)/def2-SVP level of theory, modeling both single-cellobiose and two-cellobiose unit backbones. Frontier molecular orbital evaluations demonstrated that the highest occupied molecular orbital in the neutral aminocellulose models was predominantly localized on the secondary amine nitrogen rather than the terminal primary amine, indicating that secondary amino sites serve as the primary catalytic centers. In evaluating an acid-base mechanism involving α-hydrogen deprotonation of ethyl acetoacetate to generate a reactive carbanion, calculations showed that intramolecular hydrogen bonding and conformational twisting across the two-cellobiose model stabilized conjugate ammonium cations by approximately 110 kJ mol⁻¹ relative to classical piperidine. Furthermore, calculations supported an organocatalytic electrophile activation pathway wherein the secondary amine attacks the aldehyde carbonyl to form an iminium intermediate; simulated infrared spectra of these calculated iminium species predicted vibrational bands between 1620 and 1670 cm⁻¹, matching new bands observed between 1550 and 1700 cm⁻¹ in experimental infrared spectra of spent catalysts.
Catalyst reusability evaluations highlighted both the operational durability and current boundaries of the solid biopolymers. Reusing CEDA across successive catalytic runs at 80 °C revealed that while the catalyst maintained activity, conversion declined noticeably during second cycles—dropping from 90.9 percent to lower activity for 2-hydroxybenzaldehyde after 24 h and showing a corresponding reduction for 2-hydroxy-5-nitrobenzaldehyde over 12 h. Extending the second-cycle run time of the nitro-substituted substrate from 12 to 24 h partially restored conversion, demonstrating that adjusted contact times can mitigate performance losses. Infrared spectroscopic analyses of post-reaction catalysts revealed preserved structural polysaccharide frameworks alongside persistent yellow surface coloration that resisted acetone washing. Leaching tests using strong polar eluents demonstrated that residual coumarin remained tightly adsorbed to the catalyst surfaces, suggesting that physical blocking of active amine sites contributed to the observed activity drop. Preliminary aqueous metal adsorption tests also indicated that spent CEDA retained functional chelating capacity, successfully removing copper(II) ions from aqueous solutions as an alternative end-of-life secondary application.
To explore the influence of precursor synthesis parameters, the researchers prepared an alternative tosyl cellulose precursor designated as TsCel2 with a higher sulfur content of 10.69 percent. Unlike the insoluble TsCel powder, TsCel2 dissolved completely during amination and produced granular catalysts—designated C1, C2, and C3—following precipitation with ethanol and diethyl ether. Catalyst C3, functionalized with N,N′-bis(3-aminopropyl)ethylenediamine, exhibited superior performance, achieving 100 percent conversion not only with 2-hydroxy-5-nitrobenzaldehyde (60 percent yield) and unsubstituted 2-hydroxybenzaldehyde (53 percent yield), but also with previously recalcitrant methoxy-substituted benzaldehydes, reaching 100 percent conversion and isolated yields up to 72 percent. While these findings confirm that tuning precursor tosylation can sharply improve catalytic throughput, the authors noted that post-amination precipitation introduces additional processing steps and potential mass losses that require rigorous process optimization before larger-scale deployment.
Subject of Research: Heterogeneous aminocellulose organocatalysts for sustainable coumarin synthesis via Knoevenagel condensation
Article Title: Cellulose-based catalysts for coumarins synthesis: Experimental and computational insights
Article References: Gonçalvess, F. J., Soares, L. C., Silva, M. X., Maia, L. C., Bourdreux, F., Gaucher, A., Moreau, X., Gil, L. F., Prim, D., & Gurgel, L. V. A. (2026). Cellulose-based catalysts for coumarins synthesis: Experimental and computational insights. Results in Chemistry, 32, Article 104053. https://doi.org/10.1016/j.rechem.2026.104053
Image Credits: AI Generated
DOI: 10.1016/j.rechem.2026.104053
Keywords: aminocellulose, heterogeneous catalysis, coumarin synthesis, Knoevenagel condensation, green chemistry, solvent-free synthesis, E-factor, biomass valorization, density functional theory, ethyl acetoacetate, 2-hydroxybenzaldehyde, reaction mechanisms, organocatalysis, catalyst reusability, tosyl cellulose, solid-state NMR
News Source: Bethany Barker. (November 19, 2026). Cellulose-Based Catalysts Drive Solvent-Free Coumarin Synthesis With High Conversions. Scienmag.



