• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Tuesday, November 17, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Castor Oil Accelerates Propellant Curing While Palm Olein Widens Casting Window

by
November 16, 2026
in Technology
Reading Time: 6 mins read
0
Castor Oil Accelerates Propellant Curing While Palm Olein Widens Casting Window

Castor Oil Accelerates Propellant Curing While Palm Olein Widens Casting Window

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

Castor oil accelerated chemical curing while palm olein delivered the longest and most thermally resilient processing window in an experimental evaluation of bio-based plasticizers for composite solid rocket propellants. Researchers examined the chemorheological evolution of a highly filled propellant slurry comprising ammonium perchlorate, aluminum, hydroxyl-terminated polybutadiene, and toluene diisocyanate with 79.87 weight percent solid loading at an isocyanate-to-hydroxyl index of 0.94. The comparative study directly contrasted two renewable plant-derived oils against a synthetic dioctyl adipate benchmark and an unplasticized reference across isothermal curing temperatures of 50, 60, and 70 degrees Celsius. By coupling attenuated total reflectance Fourier-transform infrared spectroscopy with rotational viscometry, the investigation revealed that chemical reaction velocity, slurry castability duration, and crosslinked network architecture do not correlate uniformly. These findings demonstrate that propellant formulators cannot assume macroscopic slurry workability mirrors functional group consumption, establishing that reaction rate, processing pot life, and structural network participation must be characterized separately when selecting sustainable energetic binder plasticizers.

Solid propellant manufacturing demands balancing high solid filler loadings with workable fluidity during motor casting. The elastomeric binder matrix, formed by reacting hydroxyl-terminated polybutadiene prepolymers with diisocyanate curatives, encapsulates dense loadings of oxidizers and metallic fuel powders that constitute approximately eighty weight percent of composite formulations. This high particulate volume creates a critical chemorheological challenge: the blended slurry must remain sufficiently fluid to fill rocket motor casings before progressive polymerization causes viscosity to surge beyond workable limits. For decades, the aerospace industry has relied on synthetic petrochemical plasticizers, primarily dioctyl adipate, to suppress initial paste viscosity, facilitate solids wetting, and prolong casting life. Growing environmental and regulatory scrutiny surrounding synthetic plasticizer persistence and toxicity has accelerated interest in renewable, bio-based alternatives. Vegetable oils such as castor oil and palm olein offer biodegradability and low toxicity, yet their molecular architectures introduce secondary hydroxyl groups and unsaturated aliphatic chains that alter step-growth polymerization pathways in dense composite matrices.

To examine how these chemical structures influence cure behavior within heavily filled binders, researchers formulated four composite systems maintaining a fixed 79.87 weight percent solid fraction and an invariant solid-to-liquid ratio. The reactive liquid binder utilized hydroxyl-terminated polybutadiene with a polydispersity index of 2.4 crosslinked by toluene diisocyanate. Castor oil was evaluated as a reactive bio-plasticizer possessing secondary hydroxyl groups with an average functionality of approximately 2.7, an acid value of 0.9 to 4.1 milligrams of potassium hydroxide per gram, and a hydroxyl value between 160 and 168 milligrams of potassium hydroxide per gram. Refined palm olein served as a non-reactive bio-plasticizer with negligible hydroxyl content and an iodine value of 63.3 grams of iodine per one hundred grams, while synthetic dioctyl adipate provided an inert petrochemical baseline.

Because castor oil introduces reactive hydroxyl groups, formulation stoichiometry required adjustments to preserve a uniform nominal isocyanate-to-hydroxyl ratio of 0.94 across all mixtures. Incorporating castor oil raised total hydroxyl content to 22.10 millimoles per one hundred grams of propellant, compared to 16.95 millimoles in the unplasticized baseline and 14.61 millimoles in the dioctyl adipate and palm olein systems, requiring a higher curative dosage. Propellants were compounded in a vertical planetary mixer through a five-stage protocol featuring vacuum degassing of the liquid premix at seventy degrees Celsius before sequential solid additions. Toluene diisocyanate curative was incorporated during the final fifteen minutes of mixing, establishing a common kinetic time zero. Propellant slurries were subsequently sealed and cured in three parallel ovens maintained at 50, 60, and 70 degrees Celsius. Real-time chemical conversion was monitored via attenuated total reflectance Fourier-transform infrared spectroscopy on sub-samples extracted across five hours, tracking isocyanate consumption across two independent batches per formulation.

A key methodological finding centered on the spectroscopic reference band used to calculate isocyanate conversion. Traditional studies normalize isocyanate consumption against the polybutadiene carbon-carbon stretching band at 1620 to 1660 reciprocal centimeters, assuming this band remains constant. However, evaluating conversion against two independent references—the aliphatic carbon-hydrogen band and the out-of-plane olefinic wagging vibration—revealed that the integrated carbon-carbon band area grew by a median factor of roughly 1.5 during curing. This area expansion correlated strongly with conversion, indicating spectral interference from growing carbonyl absorption associated with secondary biuret or urea linkages. When conversion was recalculated against the truly invariant reference bands, castor oil remained the only plasticizer accelerating cure, whereas apparent rate accelerations observed for dioctyl adipate and palm olein under carbon-carbon normalization vanished. This demonstrates that kinetic evaluations in plasticized propellants require multi-band cross-validation to prevent spectroscopic artifacts from skewing reaction rate constants.

To determine which kinetic parameters could be reliably identified, seven mathematical models were fitted to experimental conversion data and ranked using the corrected Akaike Information Criterion alongside residual bootstrap confidence intervals. The popular autocatalytic Kamal-Sourour model proved non-identifiable across three temperatures: its secondary activation energy hit parameter boundaries in six of eight batches and yielded excessive confidence intervals spanning up to 102 kilojoules per mole. In contrast, a two-step second-order model featuring a fixed two-hour breakpoint proved fully identifiable across every batch without boundary convergence. Under this two-step framework, castor oil exhibited a first-stage rate constant at sixty degrees Celsius of 16.1 to 17.7 times ten to the negative third reciprocal minutes, achieving half-conversion in 57 to 62 minutes compared to 100 to 110 minutes for the unplasticized baseline. This confirms that castor oil functions as an active co-curative, accelerating network polymerization by raising reactive functional group concentrations.

In contrast to castor oil, neither palm olein nor dioctyl adipate accelerated chemical curing over the unplasticized baseline when analyzed using validated infrared reference standards. When normalized against aliphatic carbon-hydrogen bands, their first-stage reaction rates dropped fourteen to nineteen percent below the unplasticized baseline, aligning with the fourteen percent dilution of reactive hydroxyl groups caused by non-reactive plasticizer addition. Furthermore, examining reaction rates beyond the two-hour breakpoint revealed stark behavioral divergences among the plasticizers. While castor oil exhibited an accelerated post-breakpoint rate ratio of 2.62 to 2.64 relative to its first-stage law—consistent with catalytic promotion from formed urethane groups—dioctyl adipate showed substantial late-stage deceleration, with rate ratios dropping to 0.56 to 0.70 across all reference bands.

Macroscopic chemorheological evolution was tracked using rotational viscometry under a stepped-shear protocol, adjusting rotational speeds from ten down to 0.1 revolutions per minute to maintain instrument torque compliance as slurries stiffened. Rather than measuring a viscoelastic gel point, researchers recorded the operational time required to reach an apparent viscosity threshold of ten thousand poise, defined as the practical limit for slurry casting and mold filling. At fifty degrees Celsius, the unplasticized propellant reached this casting threshold in only 68 minutes, whereas all three plasticizers substantially extended slurry castability. Castor oil lengthened the casting window to 119 minutes, dioctyl adipate extended it to 127 minutes, and palm olein provided the longest window at 138 minutes. Notably, castor oil nearly doubled castable pot life despite accelerating chemical curing. The plasticizers achieved this extension through two distinct mechanisms: all three reduced logarithmic viscosity growth rates from 1.46 down to 0.83 to 0.95 reciprocal hours, while palm olein and dioctyl adipate also reduced initial post-mixing slurry viscosity by forty to fifty percent relative to the control.

Thermal sensitivity assessments demonstrated that palm olein provided superior operational stability against temperature fluctuations during casting operations. Raising curing temperatures from 50 to 70 degrees Celsius contracted the unplasticized casting window from 68 down to 49 minutes, reflecting an acceleration ratio of 1.38. Castor oil and dioctyl adipate showed similar thermal responses, with casting windows shortening by factors of 1.28 and 1.27 across the twenty-degree range. In striking contrast, palm olein maintained an operational casting window of roughly 129 minutes at seventy degrees Celsius, yielding an acceleration factor of only 1.07. Its logarithmic viscosity buildup rate remained virtually unchanged between 50 and 70 degrees Celsius, shifting modestly from 0.89 to 0.92 reciprocal hours compared to thirty to fifty percent rate surges observed in the other systems. This minimal thermal sensitivity makes palm olein exceptionally robust against inadvertent thermal gradients or exothermic spikes during casting, providing manufacturing facilities with an expansive, forgiving processing window.

Correlating these kinetic and rheological profiles with mechanical network measurements from a companion study showed that all three plasticizers reduced cured polymer crosslink density to between 40 and 54 percent of the unplasticized baseline. Conversely, palm olein and dioctyl adipate softened the binder to Shore A hardness values near 69 while delivering superior elongations at break of 14.1 and 16.3 percent. Rigorous statistical testing confirmed that hypothetical transitions to diffusion-controlled kinetics at high conversions could neither be established nor ruled out due to wide overnight sampling intervals, leaving chemically controlled models as the only statistically defensible choice. By documenting that chemical cure velocity, slurry viscosity trajectories, and crosslinked network mechanics behave independently, the study provides a quantitative foundation for replacing toxic petrochemical plasticizers with renewable bio-based alternatives in high-performance composite solid propellants.

Subject of Research: Cure kinetics, chemorheology, and network properties of bio-based plasticized composite solid propellants

Article Title: Kinetic investigation of bio-based plasticized AP/HTPB/TDI propellants

Article References: Pinalia, A., Ratnawati, R., Wibowo, H. B., & Junjunan, S. F. (2026). Kinetic investigation of bio-based plasticized AP/HTPB/TDI propellants. Journal of Engineering and Applied Science, 73(1), Article 462. https://doi.org/10.1186/s44147-026-01329-4

Image Credits: AI Generated

DOI: 10.1186/s44147-026-01329-4

Keywords: composite solid propellants, castor oil, palm olein, dioctyl adipate, hydroxyl-terminated polybutadiene, toluene diisocyanate, ammonium perchlorate, cure kinetics, chemorheology, slurry viscosity, pot life, attenuated total reflectance FTIR, Kamal-Sourour model, two-step second-order model, parameter identifiability, crosslink density, rotational viscometry, solid rocket binder

News Source: Denise Maddox. (November 16, 2026). Castor Oil Accelerates Propellant Curing While Palm Olein Widens Casting Window. Scienmag.

Tags: ammonium perchlorateattenuated total reflectance FTIRcastor oilchemorheologycomposite solid propellantscrosslink densitycure kineticsdioctyl adipatehydroxyl-terminated polybutadieneKamal-Sourour modelpalm oleinparameter identifiabilitypot liferotational viscometryslurry viscositysolid rocket bindertoluene diisocyanatetwo-step second-order model
Share12Tweet7Share2ShareShareShare1

Related Posts

Random Voids Resist Ductile Fracture Better Than Ordered Lattices Under Low Stress Triaxiality

Random Voids Resist Ductile Fracture Better Than Ordered Lattices Under Low Stress Triaxiality

November 17, 2026
Stitching Informed Trees Improve Motion Planning in Narrow High-Dimensional Passages

Stitching Informed Trees Improve Motion Planning in Narrow High-Dimensional Passages

November 17, 2026

Simple Persistence Baseline Outperforms Microcontroller Neural Network in Daily Biogas Nowcasting

November 17, 2026

Researchers Calculate Dual Anomalous Dimensions for Conformally Coupled ϕ4 in AdS3

November 16, 2026

POPULAR NEWS

  • Engineered Myeloid Progenitor Platform Overcomes Allogeneic Barriers in CNS Tumors

    Engineered Myeloid Progenitor Platform Overcomes Allogeneic Barriers in CNS Tumors

    29 shares
    Share 12 Tweet 7
  • Physician Specialty Distribution Lags Behind Global Demographic Aging Trends

    29 shares
    Share 12 Tweet 7
  • Rapid In Planta Citrus Transformation System Enables Efficient Genome Editing

    29 shares
    Share 12 Tweet 7
  • Simulated Reinforcement Learning Model Improves 4G LTE Handover Success and Reliability

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Data-Driven Models Reveal Divergent Predictors of Aberrant Non-Professional Driving Behaviors

Higher Allostatic Load Associates With Hepatic Steatosis Among Iranian Adults

Case Report Tracks Febuxostat Transfer Into Umbilical Cord Blood and Breast Milk

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 88 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.