An adaptive chassis integrated control strategy for intelligent vehicles reduced side slip angle during cornering simulations while keeping yaw rate at target values, according to research findings. The control framework, evaluated under simulated driving conditions, demonstrated improved vehicle handling stability and driving safety by coordinating lateral and longitudinal forces across the wheels.
The research is detailed in a preprint submitted by Bin Tang, Yanjie Zhu, Haobin Jiang, and Wei Mi from the Automotive Engineering Research Institute at Jiangsu University in China. The manuscript, submitted in November 2026, is currently under open peer review for the journal Mechanical Sciences.
To address vehicle yaw stability, the researchers formulated a hierarchical control architecture. The upper layer of the system employs a chassis integrated controller based on sliding mode control, which determines the overall lateral force, longitudinal force, and yaw moment required to guide the vehicle.
The lower layer of the architecture manages tire force distribution using an adaptive genetic-quadratic programming algorithm, known as GA-QP. Parameters within the objective function of the GA-QP algorithm are adjusted adaptively according to phase plane stability-judged principles to calculate optimal force allocation for each tire.
In simulation evaluations, the adaptive integrated control strategy reduced the vehicle side slip angle by 0.791 degrees compared with an unintegrated control strategy under cornering maneuvers on high-adhesion surfaces. Under low-adhesion road conditions, the control strategy reduced the side slip angle by 0.393 degrees relative to the unintegrated baseline.
The simulation results also indicated that the adaptive strategy redistributed drive forces by reducing longitudinal torque to the front wheels and directing more longitudinal torque to the rear wheels. This torque allocation avoided front tire force saturation while maintaining the desired yaw rate and preserving vehicle directional stability.
The manuscript is currently undergoing public peer review as a preprint in Mechanical Sciences Discussions, published by Copernicus Publications. Received on November 7, 2026, the paper entered an open discussion phase on November 19, 2026, which is scheduled to remain open for interactive commentary through December 26, 2026.
Distributed under a Creative Commons Attribution 4.0 International License, the research represents work conducted by Bin Tang, Yanjie Zhu, Haobin Jiang, and Wei Mi at the Automotive Engineering Research Institute at Jiangsu University in Jiangsu, China, with Tang serving as the corresponding author. Copernicus Publications notes that it maintains neutrality with regard to jurisdictional claims and institutional affiliations, stating that the interpretations and findings expressed in the manuscript remain the sole responsibility of the authors.
The evaluation is focused on vehicle stability during cornering maneuvers across modeled high and low surface adhesion conditions, showing that combining sliding mode control with adaptive quadratic optimization keeps the yaw rate at target values while avoiding front tire force saturation.
The technical implementation relies on integrating sliding mode control with adaptive optimization to manage tire forces under dynamic driving demands.
The preprint is indexed under digital object identifier 10.5194/ms-2026-196 and distributed under Creative Commons licensing.
Subject of Research: Adaptive chassis integrated control strategy for intelligent vehicle yaw stability
Article Title: Chassis integrated control of intelligent vehicle based on adaptive GA-QP algorithm
Article References: Tang, B., Zhu, Y., Jiang, H., & Mi, W. (2026). Chassis integrated control of intelligent vehicle based on adaptive GA-QP algorithm. https://doi.org/10.5194/ms-2026-196
Image Credits: AI Generated
DOI: 10.5194/ms-2026-196
Keywords: chassis integrated control, intelligent vehicles, adaptive GA-QP algorithm, genetic-quadratic programming, sliding mode control, hierarchical control architecture, tire force distribution, side slip angle, yaw rate, yaw moment, handling stability, driving safety, phase plane stability, longitudinal torque, front tire force saturation, high adhesion coefficient, low adhesion coefficient, Mechanical Sciences
News Source: Denise Maddox. (November 19, 2026). Adaptive Chassis Control Reduces Intelligent Vehicle Side Slip Angle in Cornering Simulations. Scienmag.



