Researchers Hamdy M. Youssef and Alaa A. El-Bary have introduced a novel mathematical model for analyzing thermal stress in a solid thermoelastic sphere with variable thermal conductivity. Published in the Journal of Umm Al-Qura University for Engineering and Architecture, the study applies the Moore-Gibson-Thompson theorem of thermoelasticity to address limitations in traditional heat conduction models. The authors constructed a dimensionless system of governing equations to examine how a solid sphere responds to ramp-type heat flux on its surface. This theoretical approach assumes the material is isotropic and homogeneous, with the surface constrained to prevent volumetric strain. The work provides a detailed framework for understanding thermomechanical behavior in materials where thermal conductivity changes with temperature.
The motivation for this research stems from the physical inconsistencies in uncoupled thermoelasticity theories. Standard parabolic heat conduction equations predict that thermal waves propagate at infinite speeds, a result that contradicts observed physical behavior. By treating thermal conductivity as a function of the temperature increment, the model offers a more realistic representation of material response under thermal loading.
The mathematical formulation begins with the unified mechanical equations of motion for an isotropic, homogeneous thermoelastic material. These equations relate the displacement components to the temperature increment and the volumetric strain. The heat conduction equation is modified to include a variable thermal conductivity term, denoted as a function of the temperature increment. The authors introduce a mapping function to simplify the nonlinear terms arising from the variable conductivity. This transformation allows the governing partial differential equations to be converted into a more manageable form for analytical and numerical solution. The specific heat and thermal conductivity are linked through the material’s diffusivity, ensuring thermodynamic consistency within the model.
To solve the problem, the researchers applied the Laplace transform method to the dimensionless governing equations. The sphere is subjected to a ramp-type thermal loading, where the temperature at the surface increases linearly over a specific time interval before reaching a constant value. The boundary conditions specify that the volumetric strain at the surface is zero, simulating a rigid foundation. The Laplace transform inversions were computed numerically using the Riemann-sum approximation method, also known as Tzou’s iteration method. To handle the singularity at the center of the sphere, the authors implemented L’Hôpital’s rule, which effectively reduces the singular operator in the radial coordinate system.
The numerical assessments were conducted using material properties representative of copper. The study utilized specific values for density, Lame’s parameters, reference temperature, thermal conductivity, and linear thermal expansion. The calculations were performed for a dimensionless time of 1.0, with a constant temperature parameter of 1.0. The authors examined the effects of the thermal conductivity parameter, denoted as K1, by varying its value between -0.05, 0.0, and 0.05. These parameters allow the researchers to isolate the influence of material variability and heating rate on the thermomechanical response.
The results indicate that the thermal conductivity parameter has a significant impact on the distribution of temperature increment within the sphere. An increase in the value of K1 leads to a corresponding rise in the temperature increment throughout the material. This finding suggests that the assumption of constant thermal conductivity may underestimate the thermal response in materials where conductivity increases with temperature. The study also found that the volumetric strain distribution is strongly influenced by K1. Specifically, an increase in the thermal conductivity parameter results in an increase in the absolute value of the volumetric strain. These observations highlight the importance of accounting for variable material properties when predicting deformation in thermoelastic solids.
Furthermore, the invariant average stress, which represents the average of the principal stresses, is significantly affected by the thermal conductivity parameter. The numerical results show that as K1 increases, the absolute value of the invariant stress also rises. The study demonstrates that the ramp-time heat parameter also plays a crucial role in determining the thermomechanical response. An increase in the ramp-time parameter leads to a decrease in the temperature increment, the absolute value of the volumetric strain, and the absolute value of the invariant stress. This indicates that a slower rate of heating can mitigate the peak stress and strain values within the sphere.
The authors analyzed the distributions of temperature, strain, and stress at the center of the sphere and throughout the radial domain. The graphical representations show distinct differences in the profiles for different values of K1 and t0. When the observation time is less than the ramp duration, the temperature increment is still increasing, and the stress distributions reflect this ongoing thermal loading. The study provides detailed tables of the temperature increment, volumetric strain, and invariant stress at the center of the sphere for various parameter combinations. These data points allow for a precise comparison of the model’s predictions under different conditions.
The findings suggest that the variability of thermal conductivity affects the propagation of mechanical and thermal waves through the thermoelastic material. The study’s model offers a more accurate description of the thermomechanical behavior of solid spheres compared to models that assume constant thermal conductivity.
Limitations of the study include the assumption of an isotropic and homogeneous material, which may not hold for all real-world applications. The model also assumes that the surface is connected to a rigid foundation, preventing volumetric deformation, which is a specific boundary condition that may not apply universally. The numerical solutions are based on the Riemann-sum approximation method, which requires careful selection of parameters to ensure convergence. Despite these limitations, the study provides a comprehensive analysis of the thermal stress in a thermoelastic sphere with variable thermal conductivity.
The conceptual framework behind the research builds on extensive developments in continuum mechanics. The Moore-Gibson-Thompson heat conduction theorem originally arose from fluid mechanics before gaining widespread application in generalized thermoelasticity. Earlier formulations designed to address infinite heat propagation speeds, including theories established by Lord and Shulman as well as Green and Naghdi, introduced thermal relaxation parameters or the second sound phenomenon. The practical requirement to account for temperature-dependent thermal properties is supported by concrete experimental evidence from materials testing. For instance, documented measurements showed that silicon nitride samples experienced a reduction in thermal conductivity of up to 45 percent across temperatures ranging from 1 degree Celsius to 400 degrees Celsius. Such significant shifts demonstrate why thermal stress calculations in engineering components require formulations that explicitly treat conductivity as a variable.
In setting up the spatial geometry, the authors defined a spherical coordinate system covering the radial distance, colatitude, and longitude within a quiescent solid body free from external body forces or internal heat sources. Due to complete spherical symmetry, latitudinal and longitudinal variations vanish entirely. Consequently, the mechanical displacement reduces strictly to a single radial component, while all shear stress and shear strain components across orthogonal angular planes equal zero. In formulating the governing equations, the authors introduced an integral mapping transformation relating the thermal conductivity rate to an auxiliary temperature function. To achieve a tractable linear system of differential equations, they eliminated a very small nonlinear product term involving the thermal-conductivity parameter, the thermal expansion factor, and the spatial gradient of the temperature increment. This linearization enabled the mechanical equations of motion and constitutive relations to couple directly with the transformed heat conduction equation.
For the numerical implementation, the inversion from the Laplace transform domain to the physical time domain relied on a precise Riemann-sum approximation method. Computational stability and convergence were controlled by establishing a stopping threshold where the absolute difference between successive iterations fell well below 10^-8, adopting a scaling relation where the product of the diffusivity parameter and time approximated 4.7. The investigators also conducted expanded parametric evaluations comparing ramp-time heating values of 1.0 and 1.1 across positive, zero, and negative conductivity parameters. These targeted comparisons confirmed that longer heating durations systematically dampen peak magnitudes of temperature, volumetric deformation, and invariant stress throughout the solid sphere.
Subject of Research: Thermal stress analysis of a thermoelastic solid sphere with variable thermal conductivity under the Moore-Gibson-Thompson theorem
Article Title: Thermal stress analysis of thermoelastic solid sphere with variable thermal conductivity and subjected to ramp-type heat under Moor-Gibson-Thompson theorem
Article References: Youssef, H. M., & El-Bary, A. A. (2026). Thermal stress analysis of thermoelastic solid sphere with variable thermal conductivity and subjected to ramp-type heat under Moor-Gibson-Thompson theorem. Journal of Umm Al-Qura University for Engineering and Architecture, 17(3), 684-695. https://doi.org/10.1007/s43995-025-00256-4
Image Credits: AI Generated
DOI: 10.1007/s43995-025-00256-4
Keywords: Thermoelasticity, Moore-Gibson-Thompson, Thermal Stress, Variable Thermal Conductivity, Solid Sphere, Ramp-Type Heat, Laplace Transform, Volumetric Strain, Invariant Stress, Heat Conduction, Numerical Analysis, Copper Properties, Thermomechanical Response, Finite Propagation Speed, Isotropic Material, Dimensionless Equations, L'Hôpital's Rule, Riemann-Sum Approximation, Thermal Relaxation, Engineering Mechanics
News Source: Denise Maddox. (November 21, 2026). Variable Thermal Conductivity Alters Stress in Thermoelastic Spheres. Scienmag.



