• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Tuesday, November 17, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Taguchi Optimized Suspended Core Fiber Sensor Enhances Dual Mode Refractive Index Detection

by
November 14, 2026
in Technology
Reading Time: 6 mins read
0
Taguchi Optimized Suspended Core Fiber Sensor Enhances Dual Mode Refractive Index Detection

Taguchi Optimized Suspended Core Fiber Sensor Enhances Dual Mode Refractive Index Detection

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

A computational study published in Discover Sensors has introduced and numerically optimized a novel suspended-core fiber surface plasmon resonance sensor capable of operating through two distinct optical interrogation mechanisms. Developed by researchers Niloy Sutra Dhar, Md Rejvi Kaysir, Swajan Sitho Paul, and Md Jahirul Islam, the proposed optical waveguide integrates both conventional confinement loss peak detection and lower birefringence peak detection within a single structural platform. By leveraging the Taguchi statistical optimization methodology, the research team identified an optimal geometric configuration for the embedded plasmonic layers, achieving maximum wavelength sensitivities of 120,000 nanometers per refractive index unit for x-polarized confinement loss and 150,000 nanometers per refractive index unit using lower birefringence peak interrogation. The device operates across an unusually broad refractive index span ranging from 1.00 to 1.44, addressing long-standing structural limitations in optical sensor design where conventional configurations typically support only one detection method or require prohibitively complex multi-hole microstructures.

Surface plasmon resonance represents an established optical sensing phenomenon governed by the excitation of collective electron oscillations, termed surface plasmons, at a metal-dielectric boundary when phase-matching conditions are satisfied between an incident optical field and surface plasmon polariton waves. While traditional prism-based architectures employing the classic Kretschmann configuration provide stable plasmonic excitation, they remain constrained by substantial physical bulk, delicate mechanical alignment requirements, and difficulties in miniaturized integration. In contrast, fiber-optic platforms merge the high environmental sensitivity of plasmonic interactions with compact form factors, mechanical flexibility, and suitability for real-time remote monitoring. However, conventional photonic crystal fibers designed for plasmonic sensing frequently incorporate elaborate lattices containing dozens of microscopic air holes that present severe fabrication hurdles during manual stacking and drawing, while rarely providing the structural asymmetry necessary to support simultaneous birefringence-based and loss-based interrogation schemes without inducing detrimental modal cancelations.

To overcome these design constraints, the investigators conceptualized a specialized suspended-core fiber architecture featuring an intentionally broken geometric symmetry. The cross-section comprises a central solid core fabricated from germanium-doped silica, engineered with an elliptical profile having a major axis of 19.8 micrometers and a minor axis of 9.0 micrometers. This core is suspended within an outer fused silica cladding having an overall diameter of 125 micrometers. Surrounding the elliptical core are four circular-sector microfluidic channels configured with unequal angular dimensions, specifically two opposing channels subtending 100-degree sector angles and two complementary channels subtending 60-degree sector angles. These open channels serve as internal microfluidic conduits through which liquid or gaseous analytes can flow freely. Four rectangular gold strips are deposited along the interior silica interfaces bordering the core, positioning the plasmonic material in direct contact with both the evanescent optical field and the circulating fluid sample.

The physical principle governing the sensor relies on the evanescent field generated by total internal reflection within the elliptical germanium-doped core penetrating across the dielectric boundaries into the microfluidic voids and interacting with the four internal gold strips. When the propagation constant of the core-guided electromagnetic mode matches the propagation constant of the surface plasmon polariton mode traveling along the gold-dielectric interface, resonant energy transfer takes place, producing a sharp absorption dip in the transmitted spectrum. The structural asymmetry introduced by the elliptical core geometry and the differential channel angles creates pronounced modal birefringence, separating guided light into orthogonal x-polarized and y-polarized components with distinct effective refractive indices. This modal splitting allows the sensor to be interrogated not only by monitoring resonant confinement loss peaks across polarization states, but also by tracking shifts in the lower peak of the modal birefringence spectrum, defined by the difference between the real parts of the orthogonal effective indices.

To analyze the optical response of the complex waveguide, the authors performed two-dimensional eigenmode simulations using the finite element method implemented in COMSOL Multiphysics version 6.1. The outer domain was terminated with a 2.0-micrometer-thick perfectly matched layer designed to absorb outgoing radiation and eliminate unphysical boundary reflections. The numerical mesh was constructed using a physics-controlled normal meshing sequence yielding 283,715 degrees of freedom across 40,482 triangular domain elements, 3,204 boundary elements, and 46 vertex elements, with a minimum mesh element quality of 0.4407. The wavelength-dependent refractive indices of the fused silica cladding and germanium-doped core were modeled using empirical three-term Sellmeier equations with established dispersion coefficients. Meanwhile, the complex dielectric permittivity of the gold strips across varying optical frequencies was evaluated using the comprehensive Drude-Lorentz model, incorporating a high-frequency permittivity of 5.9673, a plasma frequency of 2113.6 terahertz, a damping frequency of 15.92 terahertz, and Lorentz oscillator resonance parameters.

Rather than relying on inefficient one-factor-at-a-time trial simulations that neglect parameter interactions, the research team applied the Taguchi statistical method to systematically optimize three crucial geometric variables of the plasmonic configuration: gold strip thickness, core-to-metal separation distance, and gold strip width. Implementing a standard Taguchi L9 orthogonal array consisting of nine structured experimental runs across three parameter levels, the team evaluated sensor responses under a larger-is-better signal-to-noise ratio formulation. The primary objectives focused on simultaneously maximizing confinement loss, enhancing birefringence intensity, and boosting spectral wavelength sensitivity. Analysis of the signal-to-noise ratios established that gold strip thickness exercised the most dominant influence on birefringence sensitivity, exhibiting a statistical delta value of 15.02 to rank first in parameter importance. The optimization converged on a final geometry consisting of a gold thickness of 0.02 micrometers, a separation distance of 1.2 micrometers, and a strip width of 9.0 micrometers, which yielded superior dual-mode sensing performance.

Evaluating the optimized suspended-core sensor under the confinement loss interrogation scheme revealed pronounced spectral redshifts as the analyte refractive index increased from 1.00 to 1.44. In the lower refractive index regime below 1.02, x-polarized modes exhibited relatively high baseline losses that rapidly stabilized into clean, measurable resonance peaks as refractive indices rose into practical sensing ranges. When the analyte refractive index was evaluated between 1.43 and 1.44, the sensor produced wavelength sensitivities of 65,000 nanometers per refractive index unit for x-polarization and 32,000 nanometers per refractive index unit for y-polarization. Under narrower high-index increments spanning 1.439 to 1.44, the x-polarized sensitivity surged to an exceptional peak of 120,000 nanometers per refractive index unit, accompanied by a y-polarized sensitivity of 40,000 nanometers per refractive index unit. Concurrently, the calculated figure of merit reached 132 inverse refractive index units for x-polarized light, reflecting strong spectral peak definition despite resonance broadening up to a full width at half maximum of 910 nanometers.

Parallel performance evaluation using the lower birefringence peak interrogation method demonstrated similarly superior capabilities without requiring loss-intensity measurements. As the analyte refractive index progressed from 1.00 toward 1.44, the real effective refractive index difference between orthogonal polarizations generated distinct birefringence spectra characterized by sharp dips corresponding to resonant plasmonic coupling. The birefringence intensity progressively strengthened with rising analyte index, reaching a maximum magnitude of 5.66 times 10 to the negative third power at an index of 1.44. Across the broad testing window, the lower birefringence peak shifted nonlinearly, fitting a second-order polynomial curve with a coefficient of determination of 0.9129. Over the narrow high-index interval from 1.439 to 1.44, the birefringence interrogation mode attained a maximum wavelength sensitivity of 150,000 nanometers per refractive index unit alongside an ultra-fine detection resolution of 6.67 times 10 to the negative seventh refractive index units, substantially outperforming previously reported asymmetric photonic crystal fiber designs.

To establish practical feasibility, the authors assessed the physical realization of the modeled suspended-core fiber using established manufacturing processes. The waveguide preform can be produced using standard computerized numerical control precision mechanical drilling to mill the four asymmetric sector channels into a silica cylinder, combined with modified chemical vapor deposition to prepare the central germanium-doped core rod following mechanical machining and hydrofluoric acid etching. The preform assembly can then be drawn into microstructured fiber using a standard optical drawing tower via the stack-and-draw technique. Deposition of the internal rectangular gold strips requires uniform nanoscale metallization along the interior channel walls, which can be achieved through advanced conformal chemical deposition methods such as atomic layer deposition or sol-gel processing. Furthermore, because the sensing interaction occurs entirely within sealed internal channels, the functional plasmonic layers remain physically protected from mechanical abrasion and ambient environmental contamination, though practical deployment demands precise microfluidic flushing protocols to prevent sample cross-contamination between successive analytical cycles.

The study concludes that the Taguchi-optimized suspended-core fiber platform delivers a versatile, high-precision architecture for optical refractive index sensing across biological, chemical, and environmental domains. By uniting confinement loss peak tracking and lower birefringence peak detection into a single robust fiber structure, the design eliminates reliance on complex multi-capillary geometries while offering intrinsic cross-validation across dual polarization states. Although the model demonstrated reliable computational response across the entire span from 1.00 to 1.44, the authors noted that practical biomedical targets—including the discrimination of subtle refractive index differences between healthy cells and malignant cancerous tissues—primarily occupy the high-sensitivity regime between 1.30 and 1.44. The authors also highlighted that the four-channel internal architecture presents clear opportunities for future functional extension, such as filling isolated channels with temperature-responsive polymers like polydimethylsiloxane to achieve simultaneous, decoupled measurements of ambient temperature and analyte refractive index within a single compact probe.

Subject of Research: Taguchi optimization of a dual-interrogation suspended-core fiber surface plasmon resonance sensor

Article Title: Taguchi-optimized suspended-core fiber SPR sensor with dual-interrogation performance analysis for broad-range RI detection

Article References: Dhar, N. S., Kaysir, M. R., Paul, S. S., & Islam, M. J. (2026). Taguchi-optimized suspended-core fiber SPR sensor with dual-interrogation performance analysis for broad-range RI detection. Discover Sensors, 2(1), Article 14. https://doi.org/10.1007/s44397-026-00045-1

Image Credits: AI Generated

DOI: 10.1007/s44397-026-00045-1

Keywords: surface plasmon resonance, suspended-core fiber, Taguchi optimization, refractive index sensing, birefringence peak interrogation, confinement loss, finite element method, optical fiber sensors, polarization modes, plasmonic resonance, microstructured optical fibers, COMSOL Multiphysics, gold thin films, Sellmeier equation, Drude-Lorentz model, optical sensor resolution, microfluidic channels, evanescent field

News Source: Denise Maddox. (November 14, 2026). Taguchi Optimized Suspended Core Fiber Sensor Enhances Dual Mode Refractive Index Detection. Scienmag.

Tags: birefringence peak interrogationCOMSOL Multiphysicsconfinement lossDrude-Lorentz modelevanescent fieldfinite-element methodgold thin filmsmicrofluidic channelsmicrostructured optical fibersOptical fiber sensorsoptical sensor resolutionplasmonic resonancepolarization modesrefractive index sensingSellmeier equationsurface plasmon resonancesuspended-core fiberTaguchi optimization
Share12Tweet7Share2ShareShareShare1

Related Posts

PUCC Framework Cuts Cloud GPU Training Time by 75 Percent

PUCC Framework Cuts Cloud GPU Training Time by 75 Percent

November 17, 2026
Digital Health Literacy Alone Does Not Ensure Active Rheumatic Disease Decisions

Digital Health Literacy Alone Does Not Ensure Active Rheumatic Disease Decisions

November 17, 2026

Plant-Synthesized Silver Nanoparticles Enhance Black Gram Seedling Growth in Laboratory Tests

November 17, 2026

Offshore Wind Wake Predictions Vary Up to Four Percent Across Software Implementations

November 17, 2026

POPULAR NEWS

  • Aprepitant Increases Tacrolimus Clearance for Three Weeks After Stem Cell Transplantation

    Aprepitant Increases Tacrolimus Clearance for Three Weeks After Stem Cell Transplantation

    29 shares
    Share 12 Tweet 7
  • Refractory Generalized Myasthenia Gravis Incurs Substantially Higher Economic Burden in China

    29 shares
    Share 12 Tweet 7
  • Cerebral Autoregulation Index Fluctuates Widely During One-Lung Ventilation in Two Cases

    29 shares
    Share 12 Tweet 7
  • Bacteriophages Suppress Resistant Pseudomonas aeruginosa Isolates in Laboratory Assessment

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Aprepitant Increases Tacrolimus Clearance for Three Weeks After Stem Cell Transplantation

Refractory Generalized Myasthenia Gravis Incurs Substantially Higher Economic Burden in China

Cerebral Autoregulation Index Fluctuates Widely During One-Lung Ventilation in Two Cases

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 88 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.