Scientists studying fluid dynamics explore mechanism at work in interfacial tension

Examining the flow of fluids, scientists have conducted a study of the interface between two liquids, focusing on a force called interfacial tension. Their numerical simulation helped them better understand the mechanism at work in interfacial tension. This work contributes to the understanding of interfacial fluid dynamics. It offers potential applications in a variety of fields ranging from oil recovery to medical use.

Their work is published in the Journal of Fluid Mechanics on June 20, 2023.

In the interface between two fluids, scientists consider diffusion to be important in a completely miscible or fully mixed system. By contrast, oil and water are examples of immiscible liquids, that do not mix well together. Scientists have considered interfacial tension to be important in a completely immiscible system. However, even in a completely miscible system, if the mixing process is slow, a force such as interfacial tension is expected to act. This is called effective interfacial tension.

Scientists also know that there is a monotonic relationship – never increasing or decreasing – between the flow strength and the hydrodynamic instability of the interface. The stronger the flow, the greater the hydrodynamic instability. Recent experiments using flow and effective interfacial tension have shown a break in the monotonic relationship. However, the experiments have not clarified the mechanism at work in this process. “We thought that it would be of academic value in the field of interfacial fluid dynamics to elucidate the mechanism,” said Ryuta X. Suzuki, an assistant professor at the Tokyo University of Agriculture and Technology.

The research team used a numerical simulation to clarify the effect of effective interfacial tension on the flow in the mixing process of two solutions. They investigated the effect of the weak interfacial tension, or effective interfacial tension, that occurs between two liquids until they completely mix on the hydrodynamic instability of the interface. They specifically examined the phenomenon called viscous fingering, in which the interface spreads in a finger-like shape because of the difference in the viscosity of the two fluids. Viscous fingering, also called Saffman-Taylor instability, is a fundamental, yet difficult to control, interfacial instability.

With their numerical simulation, the team obtained results that overturned the conventional wisdom that hydrodynamic instability at the interface increases, that is, the finger width decreases, as the flow velocity increases. Their work clarified the mechanism behind this phenomenon. “In particular, the results of the present study overturned the assumption that the flow strength and instability vary monotonically,” said Manoranjan Mishra, a professor at the Indian Institute of Technology, Ropar.

“This result suggests that the hydrodynamic instability at the interface can be controlled by the effective interfacial tension and the velocity of flow, and is a forerunner to future experimental, numerical, and theoretical studies that will lead to control methods for viscous fingering with effective interfacial tension,” said Suzuki.

The team views this result as an important discovery that will contribute to the creation of new control methods for enhanced oil recovery processes. They also see their work having important applications in processes where stomach acid does not dissolve the stomach, but only the food. The relationship between gastric acid and gastric mucus is related to this study and may become an important concept in the field of medicine in the future.

“While viscous fingering has been studied since the 1950s, this research is academically valuable because it is a decisive result that overturns the conventional wisdom that there is a monotonous relationship between flow strength and interfacial hydrodynamic instability,” said Suzuki. Looking ahead, the team is hopeful that their work will be a precursor for further experimental, numerical, and theoretical studies on the control method of viscous fingering with effective interfacial tension.

Yuka F. Deki and Yuichiro Nagatsu, Tokyo University of Agriculture and Technology; Manoranjan Mishra from the Indian Institute of Technology Ropar; and Ryuta X. Suzuki from the Tokyo University of Agriculture and Technology and the Japan Science and Technology Agency.

This research was funded by JSPS KAKENHI Grant Numbers JP22K03900, JP22K20402 and by JST, PRESTO Grant Number JPMJPR22O5, Japan.

 

###

 

About Tokyo University of Agriculture and Technology (TUAT):

TUAT is a distinguished university in Japan dedicated to science and technology. TUAT focuses on agriculture and engineering that form the foundation of industry, and promotes education and research fields that incorporate them. Boasting a history of over 140 years since our founding in 1874, TUAT continues to boldly take on new challenges and steadily promote fields. With high ethics, TUAT fulfills social responsibility in the capacity of transmitting science and technology information towards the construction of a sustainable society where both human beings and nature can thrive in a symbiotic relationship. For more information, please visit http://www.tuat.ac.jp/en/.

 

About Indian Institute of Technology Ropar (IIT Ropar):

Indian Institute of Technology Ropar (IIT Ropar) is a premier engineering, science, and technology institute in India established in 2008 by the Ministry of Education, Govt. of India (formerly: Ministry of Human Resource Development (MHRD), Govt. of India). IIT Ropar has initiated research on socially relevant problems like water and air pollution, affordable point-of-care healthcare technologies, and artificial intelligence applied to solve future engineering challenges. IIT Ropar has made active research collaborations with the likes of MIT, SUNY, Cardiff University, Cambridge University to name a few. Department of Science of Technology (DST), Govt of India, has established a Technology Innovation Hub (TIH) in the application domain of Agriculture & Water, named as Agriculture and Water Technology Development Hub (AWaDH), at IIT Ropar in the framework of National Mission on Interdisciplinary Cyber-Physical Systems (NM-ICPS). The high standard of research has ensured that year-after-year IIT Ropar has the best research performance amongst newer IITs, in India. The institute has made significant research investment in Industry 4.0 in partnership with the Government of Taiwan by setting up the Indo-Taiwan Joint Research Centre on Artificial Intelligence and Machine Learning, a one of its kind in India. For more information, please visit https://www.iitrpr.ac.in/.

 

Contacts

Ryuta X. Suzuki, Ph.D.
Assistant professor, Institute of Global Innovation Research, Tokyo University of Agriculture and Technology,
Presto Researcher, Japan Science and Technology Agency.
[email protected]

Yuichiro Nagatsu, Ph.D.
Professor, Department of Chemical Engineering, Tokyo University of Agriculture and Technology
[email protected]

Manoranjan Mishra, Ph.D.
Professor, Department of Mathematics, Indian Institute of Technology Ropar, India
[email protected]

 

For more information about the Nagatsu laboratory and the Fluid Dynamics Research Lab. run by Dr. Mishra, please visit  http://web.tuat.ac.jp/~nagatsu/en/index.html, and https://www.iitrpr.ac.in/FD/Home.html.

 

---

---