Materials researchers have developed a series of orange-to-red emitting calcium yttrium oxide phosphors activated with trivalent samarium ions, presenting an efficient luminescent material engineered for phosphor-converted solid-state lighting applications. Synthesized across activator concentrations ranging from 1.0 to 3.0 mole percent, the newly prepared inorganic phosphors demonstrate intense characteristic emissions under near-ultraviolet excitation alongside exceptional phase purity and thermal stability. Comprehensive optical investigations revealed that the luminescence output attains its peak efficiency at a samarium concentration of 1.5 mole percent, achieving notable colour purity values between 69.6 percent and 94.8 percent and correlated colour temperatures situated between 1000 Kelvin and 1344 Kelvin. These specific colorimetric properties confirm pronounced warm-light performance, addressing a persistent technical bottleneck in the design of next-generation solid-state illumination devices where the lack of spectrally stable, thermally robust orange-red down-conversion phosphors often limits overall device quality and efficacy.
The global transition toward light-emitting diode solid-state lighting represents an essential milestone for global energy conservation, with lighting installations projected to reach approximately 84 percent market penetration by 2035. Achieving targets established by the United States Department of Energy could unlock roughly 572 terawatt-hours of annual site-energy savings by 2035, translating directly to an estimated reduction of 196 million metric tonnes of atmospheric carbon dioxide emissions. Phosphor-converted light-emitting diodes represent the predominant technology driving these gains, with practical luminous efficacies of approximately 250 lumens per watt achievable under representative operating conditions. However, increasing the colour rendering index from 80 to 90 often imposes a practical efficacy penalty of 15 to 20 percent due to the optical shortcomings and broad dissipation profiles of traditional red phosphors. Developing host matrices with low phonon energy, chemically benign compositions, and precise activator-ion accommodations remains central to mitigating this fundamental efficacy-quality trade-off across sustainable modern lighting infrastructures.
To explore an effective oxide host, the research team synthesized calcium yttrium oxide matrices incorporating variable samarium concentrations using a high-temperature solid-state reaction method. Analytical-grade calcium carbonate, yttrium oxide, and samarium oxide served as chemical precursors without secondary modification. Stoichiometric quantities corresponding to doping concentrations between 1.0 and 3.0 mole percent in steps of 0.5 mole percent were thoroughly homogenized in an agate mortar for one hour with ethanol to ensure intimate reactant contact. The dried powder mixtures underwent preliminary calcination at 950 degrees Celsius for three hours in ambient air to drive solid-state diffusion and thermal decomposition of carbonate species. Following an intermediate regrinding stage to maintain uniform compositional distribution, the precursors were placed in alumina crucibles and sintered at 1200 degrees Celsius for six hours before cooling naturally to room temperature, producing stable, crystalline phosphor powders ready for structural and spectroscopic analysis.
Powder X-ray diffraction patterns recorded over a two-theta range from 10 to 80 degrees confirmed that all synthesized compositions crystallized into a single-phase cubic system matching the Ia-3 space group without detectable secondary phases or impurities. Prominent reflection peaks satisfied the systematic reflection condition where the sum of Miller indices is even, typical of body-centred cubic structures. Detailed inspection revealed a systematic displacement of the prominent 222 diffraction peak toward lower scattering angles as the samarium dopant fraction expanded, demonstrating a progressive enlargement of interplanar crystal spacing. Rietveld structural refinements revealed that the refined cubic lattice parameter expanded from 10.6008 angstroms in pristine calcium yttrium oxide to 10.6033 angstroms for the 1.5 mole percent samarium composition, accompanied by an increase in unit-cell volume from 1191.302 to 1192.144 cubic angstroms. Cationic site-occupancy refinement and ionic radius mismatch analyses supported preferential substitution of trivalent samarium at octacoordinated divalent calcium sites, exhibiting a small geometric mismatch of 3.66 percent.
To thoroughly evaluate crystallite dimensions and internal lattice distortion, the investigators conducted line-profile broadening analyses using the Debye-Scherrer equation, the Williamson-Hall uniform deformation model, size-strain plot formalism, and the Halder-Wagner method. Debye-Scherrer calculations, based strictly on peak full widths at half maximum without accounting for strain, yielded an average crystallite size of approximately 117.12 nanometers across the samples. In contrast, the Williamson-Hall method separated size and strain contributions under isotropic assumptions, yielding smaller crystallite dimensions. The size-strain plot method, which assumes a Lorentzian profile for crystallite size broadening and a Gaussian profile for lattice strain while down-weighting high-angle reflections, provided average crystallite sizes of 94.57 nanometers and microstrain values averaging 2.21 multiplied by ten to the power of negative three. Complementary Halder-Wagner analysis produced crystallite sizes averaging 89.35 nanometers with average microstrain around 0.86 multiplied by ten to the power of negative three, confirming that samarium incorporation preserved structural integrity with low internal strain.
Surface morphology and chemical homogeneity were evaluated through scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy. Micrographs of the optimized 1.5 mole percent samarium-doped phosphor revealed irregular, block-like agglomerates with rough surface textures, characteristic of high-temperature solid-state sintering and partial particle necking. Agglomerate sizes ranged from sub-micrometer dimensions up to several micrometers without macroscopic porosity or structural fracture lines. High-magnification images indicated that each secondary agglomerate consisted of densely packed clusters of smaller crystallites, matching the dimensions derived from diffraction line-broadening evaluations. Energy-dispersive X-ray spectroscopy identified clean, distinct elemental peaks for calcium, yttrium, oxygen, and samarium, matching intended stoichiometric proportions. Corresponding elemental mapping demonstrated uniform spatial distributions for all four constituent elements throughout the scanned particles, confirming complete absence of localized elemental segregation, secondary phase separation, or abnormal grain boundary crystallization during the prolonged high-temperature sintering cycle.
Fourier-transform infrared spectroscopy collected across the range of 400 to 4000 inverse centimeters characterized the functional group signatures and lattice vibrational dynamics of the synthesized materials. Broad high-wavenumber absorption features observed near 3642 inverse centimeters were assigned to the stretching modes of hydroxyl groups and moisture physically adsorbed onto pellet surfaces during preparation. A distinct vibrational band situated near 1642 inverse centimeters corresponded to the bending vibrations of residual molecular water, while faint absorption at 1472 inverse centimeters was attributed to trace organic carbon-hydrogen deformations. A noticeable vibrational signature at 1414 inverse centimeters was linked directly to samarium-oxygen coordination within the lattice network. In the fingerprint spectrum, an absorption peak near 866 inverse centimeters corresponded to calcium-oxygen stretching vibrations associated with crystalline matrix formation, a band at 574 inverse centimeters reflected yttrium-oxygen lattice modes, and lower bands at 519 and 502 inverse centimeters represented metal-oxygen framework vibrations of the cubic host.
Diffuse reflectance spectroscopy and optical bandgap evaluations clarified the electronic structure, refractive properties, and dielectric characteristics of the phosphor series across ultraviolet, visible, and near-infrared wavelengths. The spectra displayed strong absorption below 300 nanometers originating from host absorption and ligand-to-metal charge-transfer transitions between oxygen and samarium ions. Additional discrete absorption peaks in the visible and near-infrared spectral regions corresponded to 4f-4f transitions originating from the ground state of samarium. Application of the Kubelka-Munk function and modified Tauc relations for indirect allowed transitions yielded an optical bandgap of 3.97 electron volts for the undoped host and 4.00 electron volts for the 1.5 mole percent doped phosphor. Theoretical calculations based on optical bandgap values yielded a refractive index of approximately 1.85 and metallization criterion values of 0.5545 for pristine and 0.5528 for doped samples. Because these metallization metrics remain below unity, the phosphors preserve an insulating non-metallic character beneficial for optical luminescence.
Photoluminescence excitation measurements monitoring the dominant 608-nanometer emission identified an intense, broad ligand-to-metal charge-transfer absorption band centered at 215 nanometers alongside multiple sharp intra-configurational 4f-4f absorption peaks between 240 and 450 nanometers. The prominent 215-nanometer band represents electric-dipole-allowed transfer between oxygen ligands and central samarium ions. Among visible and near-ultraviolet transitions, the excitation line situated at 407 nanometers, corresponding to the transition from the ground state to the excited 4F7/2 level, exhibited the highest intensity. Consequently, 407 nanometers was selected as the optical excitation wavelength for photoluminescence emission profiling. Under this excitation, emission spectra across all samples exhibited three principal sharp bands at approximately 570, 608, and 656 nanometers, attributed to transitions from the excited 4G5/2 level to the 6H5/2, 6H7/2, and 6H9/2 terminal states. The emission line at 608 nanometers generated the dominant spectral output, imparting intense orange-red coloration.
Investigating the emission intensity across activator dopant concentrations revealed that luminescent output increased progressively from 1.0 to 1.5 mole percent samarium, where the 608-nanometer peak accounted for 24.7 percent of relative spectral intensity. Beyond this optimum threshold, emission intensity declined steadily to 24.4 percent at 2.0 mole percent, 19.3 percent at 2.5 mole percent, and 11.5 percent at 3.0 mole percent due to concentration quenching. The structural distance between adjacent activator ions diminishes as doping levels increase, triggering non-radiative energy transfer. Energy matching facilitates resonant cross-relaxation channels wherein an excited samarium ion transfers partial energy to a neighboring ground-state activator, dropping both ions into intermediate energy states that relax non-radiatively. Blasse equation calculations using structural unit-cell parameters established a critical activator separation distance of 26.69 angstroms. Because this separation significantly exceeds five angstroms, exchange interactions were ruled out. Dexter theoretical analysis of logarithmic emission intensity ratios yielded an interaction parameter of 8.4402, confirming that electric dipole-quadrupole coupling dominates concentration quenching.
Time-resolved luminescence decay measurements obtained by monitoring the 608-nanometer emission under 407-nanometer excitation exhibited bi-exponential decay profiles across all doped samples. The extracted average luminescence lifetime decreased systematically from 2.36 milliseconds at 1.0 mole percent to 1.78 milliseconds at 1.5 mole percent, 1.49 milliseconds at 2.0 mole percent, 1.23 milliseconds at 2.5 mole percent, and 1.21 milliseconds at 3.0 mole percent samarium. This steady reduction in excited-state lifetime with increased activator loading reflects accelerated non-radiative decay rates caused by enhanced energy migration among closely spaced samarium centers. Fitting the concentration-dependent decay data to the theoretical Auzel model yielded an intrinsic radiative lifetime of 5.15 milliseconds and a characteristic quenching threshold concentration of 0.83 mole percent. Calculation of non-radiative decay rate constants and internal quantum efficiency confirmed that non-radiative relaxation becomes increasingly dominant at dopant levels above the 1.5 mole percent optimization point.
Photometric assessments conducted using the standard CIE 1931 colorimetric coordinate system established that the emitted radiation across all prepared compositions remained positioned within the orange-red spectral zone, characterized by dominant wavelengths spanning 605.8 to 624.6 nanometers. Calculated colour purity values reached elevated levels between 69.6 percent and 94.8 percent, demonstrating high spectral saturation with minimal chromatic distortion. Furthermore, the correlated colour temperature values ranged consistently between 1000 Kelvin and 1344 Kelvin, quantitatively confirming the phosphor’s warm-light characteristics. While the human eye exhibits reduced photopic sensitivity in the far-red spectral spectrum compared to green wavelengths, the high spectral purity and thermal stability of the 1.5 mole percent samarium-activated calcium yttrium oxide phosphor make it an exceptional candidate as an orange-red down-converting component for warm white light-emitting diodes, specialized display backlights, and high-efficiency solid-state illumination devices.
Subject of Research: Structural, optical, and luminescent characteristics of samarium-activated calcium yttrium oxide phosphors for solid-state lighting
Article Title: Orange-to-red-emitting Sm3+-activated CaY2O4 phosphors for energy-efficient solid-state lighting applications
Article References: Patil, V. S., Charudat, P., Sayyed, M. I., Kamath, N., & Kamath, S. D. (2026). Orange-to-red-emitting Sm3+-activated CaY2O4 phosphors for energy-efficient solid-state lighting applications. Journal of Materials Science. https://doi.org/10.1007/s10853-026-13849-8
Image Credits: AI Generated
DOI: 10.1007/s10853-026-13849-8
Keywords: CaY2O4 phosphor, samarium doping, solid-state lighting, phosphor-converted LEDs, orange-red emission, photoluminescence spectroscopy, concentration quenching, dipole-quadrupole coupling, Rietveld refinement, Debye-Scherrer method, size-strain plot, diffuse reflectance spectroscopy, optical band gap, luminescence lifetime, CIE chromaticity, correlated colour temperature, colour purity
News Source: Denise Maddox. (November 19, 2026). Orange-Red Samarium-Doped Calcium Yttrium Oxide Phosphors Advance Solid-State Lighting. Scienmag.



