Published in the Journal of Materials Science, the study focuses on Cu0.9Ag0.1Cr1-xBixSe2 layered chalcogenides, a class of materials known for their potential in energy conversion. The team systematically investigated compositions with bismuth concentrations (x) of 0, 0.01, 0.03, and 0.05 to determine how this substitution affects both heat and charge transport. The central finding is that a specific bismuth doping level optimizes the material’s ability to convert heat into electricity by simultaneously reducing heat conduction through the lattice and modifying electrical carrier behavior.
The structural and microstructural analyses confirmed that the samples formed a primary layered CuCrSe2 matrix, accompanied by a minor secondary phase of CuCr2Se4.
The mechanism behind the enhanced performance is attributed to lattice softening and increased phonon scattering. Bismuth incorporation induced local lattice distortion and altered the local chemical environment, leading to what the authors describe as lattice softening. Additionally, the interfaces created by the secondary CuCr2Se4 phase contributed to this scattering effect. The combined result was a significant reduction in lattice thermal conductivity, a critical factor for high thermoelectric efficiency. The x = 0.01 composition achieved an ultralow lattice thermal conductivity ranging from 0.54 to 0.64 Wm-1K-1 over the investigated temperature range.
Electrical transport properties were also affected by the bismuth substitution, as revealed by Hall measurements. The data showed a non-monotonic variation in both carrier concentration and mobility as the bismuth content increased. This indicates that the bismuth-induced defect environment modifies how charge carriers move through the material. The x = 0.01 composition exhibited the highest power factor, reaching approximately 633 μWm-1K-2. This peak in electrical performance, when combined with the low thermal conductivity, led to the highest figure of merit in the series.
The peak dimensionless figure of merit, zT, was approximately 0.43 at 753 K for the x = 0.01 composition. The study demonstrates that controlled bismuth substitution in Ag-containing CuCrSe2 provides an effective approach for regulating both phonon and charge transport. The results suggest that fine-tuning the bismuth concentration can optimize the interplay between structural distortion and electronic properties.
The research underscores the importance of understanding the interplay between lattice dynamics and carrier transport in layered chalcogenides. By identifying the specific role of bismuth in inducing lattice softening and modifying defect environments, the study offers a pathway for further optimization. The findings are limited to the specific compositions and temperature range investigated, but they provide a clear example of how minor elemental substitutions can yield significant improvements in material properties.
Subject of Research: Thermoelectric performance enhancement in Bi-substituted Cu0.9Ag0.1CrSe2 layered chalcogenides
Article Title: Enhanced thermoelectric performance in Bi-substituted Cu0.9Ag0.1CrSe2 layered chalcogenides via lattice softening and carrier transport optimization
Article References: Ansari, A. T., Karunakaran, S., Archana, J., Navaneethan, M., & Nakamura, A. (2026). Enhanced thermoelectric performance in Bi-substituted Cu0.9Ag0.1CrSe2 layered chalcogenides via lattice softening and carrier transport optimization. Journal of Materials Science. https://doi.org/10.1007/s10853-026-13901-7
Image Credits: AI Generated
DOI: 10.1007/s10853-026-13901-7
Keywords: thermoelectric materials, layered chalcogenides, bismuth substitution, lattice thermal conductivity, carrier transport, phonon scattering, energy conversion, materials science, crystal structure, figure of merit, Enhanced, thermoelectric
News Source: Denise Maddox. (November 10, 2026). Bismuth Substitution Enhances Thermoelectric Performance in Layered Chalcogenides. Scienmag.



