• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Friday, November 20, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Titanium Dioxide Coated Red Mud Mortars Degrade Pollutants and Inactivate Bacteria

by
November 20, 2026
in Technology
Reading Time: 6 mins read
0
Titanium Dioxide Coated Red Mud Mortars Degrade Pollutants and Inactivate Bacteria

Titanium Dioxide Coated Red Mud Mortars Degrade Pollutants and Inactivate Bacteria

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

Researchers have developed a sustainable building material by depositing titanium dioxide coatings onto cement mortars modified with industrial red mud, demonstrating substantial visible-light photocatalytic nitrogen oxide removal alongside rapid destruction of surface bacteria. Documented in Results in Engineering by lead author Gurbir Kaur and colleagues, the investigation demonstrates that coupling commercial titanium dioxide with iron-rich bauxite refining residue activates photocatalytic reactions under ordinary indoor illumination without requiring energetic ultraviolet light. By exploiting the intrinsic iron oxide within the red mud matrix, the surface-modified mortars achieved up to a 64.8 percent conversion of nitric oxide and a 56.5 percent total nitrogen oxide removal under filtered visible wavelengths exceeding 420 nanometers. Concurrently, the surface treatment induced complete photoinactivation of Escherichia coli within 105 minutes of visible light exposure, exceeding an 8.09-log reduction. This dual performance addresses persistent indoor air pollution and bioaerosol hazards while providing a high-value recycling route for global industrial bauxite refining residues.

Indoor environmental quality represents an increasingly complex challenge governed by infiltrating outdoor pollutants and internal emission sources. External contaminants such as particulate matter, nitrogen dioxide, and volatile organic compounds readily penetrate building envelopes, with outdoor sources accounting for up to 67 percent of indoor nitrogen dioxide concentrations. Meanwhile, biological agents introduce serious health risks through bioaerosols shed by occupants, plumbing systems, and ventilation units. In European indoor spaces, Gram-positive cocci such as Staphylococcus and Micrococcus species dominate airborne bacterial populations, contributing directly to hospital-acquired infections. Although titanium dioxide is widely utilized for air-purifying pavements and self-cleaning surfaces due to its low cost, chemical stability, and non-toxic nature, its wide bandgap of 3.2 electron volts limits its activation almost exclusively to ultraviolet light, which comprises only five percent of the solar spectrum. Overcoming this constraint requires bandgap engineering or semiconductor heterojunctions capable of absorbing visible light to sustain photocatalytic activity indoors.

To supply an abundant source of iron oxide, the authors utilized red mud provided by Alcoa from its refinery in San Ciprián, Spain. Red mud is an alkaline residue generated during alumina extraction at rates of 1.0 to 2.5 tonnes per tonne of alumina, with global stockpiles exceeding four billion tonnes and growing by 120 to 150 million tonnes annually. The team evaluated the material under three thermal states: oven-dried at 105 degrees Celsius for 24 hours (R105), and calcined for three hours at 300 degrees (R300) or 600 degrees Celsius (R600). X-ray fluorescence confirmed that all samples were dominated by iron oxide, ranging from 58.94 to 59.88 percent, and aluminum oxide, between 16.10 and 16.33 percent. Laser diffraction identified a bimodal particle size distribution, featuring a fine mode at 0.2 to 0.4 micrometers and a coarser mode at 2 to 6 micrometers, with calcination at 600 degrees narrowing particle dispersion.

To evaluate structural feasibility, the researchers cast prismatic mortar specimens measuring 40 by 40 by 160 millimeters using commercial CEM III/A 42.5 N/SRC cement, standard CEN sand, and a water-to-binder ratio of 0.5. Red mud replaced Portland cement at levels of 5, 10, and 15 weight percent across all three thermal preparation states. Compressive testing conducted after 28 days demonstrated that all formulations exceeded 10 megapascals under a continuous loading rate of 10 newtons per second, meeting European standards for structural mortars, masonry bedding, and external renders. Mineralogical analyses by X-ray diffraction and Fourier-transform infrared spectroscopy revealed that thermal treatment induced progressive dehydroxylation, converting gibbsite to boehmite and amorphous alumina while dehydrating goethite into hematite by 600 degrees Celsius. These phase transformations stabilized oxide phases without compromising mortar strength, confirming that integrating raw or moderately heated red mud maintains the structural performance required for diverse construction applications.

The method of applying the photocatalyst proved essential in governing catalytic efficiency. The researchers evaluated three incorporation routes: pipette-assisted deposition, dip-coating, and a five-millimeter bulk-mixed surface overlay where titanium dioxide was blended directly into the red mud mortar mix. Commercial Evonik VP Aeroperl P25/20 titanium dioxide, possessing a specific surface area of 35 to 65 square meters per gram, served as the active catalyst. Ultrasonic thickness gauging revealed that pipette-assisted deposition and dip-coating produced comparable surface films measuring approximately 32 micrometers in thickness. However, bulk incorporation severely compromised performance, as cement hydration products encapsulated the catalyst particles, reducing exposed active sites and creating inactive titanium-oxygen-silicon bonds. Furthermore, dip-coating yielded erratic results due to hydrodynamic drainage effects that produced non-uniform film edges. Consequently, pipette-assisted deposition emerged as the most consistent technique, providing superior surface exposure, reproducible thickness control, and strong mechanical interlocking on the porous mortar substrate.

To optimize the pipette-assisted coating method, the researchers systematically evaluated thermal post-treatment temperatures alongside suspension layer counts using R15-300 and R5-105 mortar substrates. Mortars received up to three layers of a titanium dioxide-ethanol suspension (0.01 grams per milliliter) followed by heat treatment at 350 or 400 degrees Celsius for 90 minutes. Thermal treatment at 350 degrees Celsius provided optimal crystallinity and surface hydroxyl density, yielding 17 to 19 percent higher visible-light nitrogen oxide removal than 400-degree calcination. While two- and three-layer coatings achieved comparable overall nitric oxide conversions of approximately 65 to 66 percent under visible light, the three-layer system exhibited higher nitrogen dioxide generation rates and an elevated nitrogen dioxide selectivity of 13.5 percent, compared to 9.3 percent for the two-layer system. Because releasing toxic nitrogen dioxide undermines air purification objectives, the double-layer configuration heat-treated at 350 degrees Celsius was chosen as the optimal coating strategy.

Gas-phase depollution experiments conducted in a continuous-flow photoreactor under simulated solar and strictly visible illumination confirmed marked performance gains for the coated red mud mortars. Uncoated red mud powders exhibited limited baseline photocatalytic activity, removing 8 to 10 percent of nitric oxide under solar light and approximately 5 percent under visible light. In contrast, applying the optimized two-layer titanium dioxide coating onto red mud mortars produced substantial improvements across all replacement levels. Under strict visible illumination, incorporating 5 percent red mud increased nitric oxide conversion by 29 to 61 percent and total nitrogen oxide removal by 38 to 91 percent relative to coated control mortars. Mortars with 10 percent red mud achieved enhancements of 33 to 57 percent for nitric oxide and 46 to 74 percent for total nitrogen oxides, while 15 percent red mud formulations showed 26 to 65 percent and 41 to 83 percent increases, respectively.

Microstructural investigations clarified the interfacial mechanisms responsible for this enhanced visible-light photocatalysis. Scanning electron microscopy and energy-dispersive X-ray mapping confirmed intimate spatial co-localisation between titanium and iron, showing continuous titanium networks interwoven with discrete iron clusters across the mortar surface. X-ray diffraction identified a surface iron-titanium oxide phase alongside coexisting anatase titanium dioxide and hematite from the red mud. Because hematite possesses a narrow bandgap of 1.9 to 2.2 electron volts, it absorbs visible light up to 600 nanometers, exciting valence-band electrons. Driven by interfacial energy differences, these photogenerated electrons migrate into the titanium dioxide conduction band to reduce molecular oxygen into superoxide radicals, while photogenerated holes oxidize surface water into hydroxyl radicals. The authors noted that given red mud’s multiphase mineralogy, including aluminosilicates and residual hydroxides, this charge transfer represents a plausible overall pathway rather than definitive proof of an idealized, single-heterojunction band alignment.

The biocidal efficacy of the optimized materials was confirmed through a standardized photoinactivation assay employing Escherichia coli K-12 suspensions applied directly to water-saturated mortar blocks under visible illumination. Uncoated control mortars produced negligible inactivation of approximately 6 percent at 30 minutes and 9 percent at 60 minutes, while dark control experiments showed zero bacterial decline, verifying that cell death required light activation. In contrast, titanium dioxide-coated red mud mortars demonstrated rapid, time-dependent antibacterial activity. After 60 minutes of visible irradiation, formulations such as R10-105, R10-300, R10-600, and R15-105 achieved greater than 3-log reductions, indicating over 99.9 percent bacterial eradication. Extending visible irradiation to 105 minutes drove inactivation past an 8.09-log reduction across all coated red mud formulations, achieving near-complete bacterial destruction. Non-parametric Kruskal-Wallis testing confirmed strong statistical significance, yielding an H-statistic of 195.11 against a critical chi-square value of 43.77, with Dunn’s post hoc tests verifying significant divergence from controls.

Despite these encouraging results, the researchers highlighted several technical boundaries and practical limitations that warrant further investigation before real-world deployment. The current protocol requires thermal calcination at 350 to 400 degrees Celsius to immobilize the titanium dioxide coating, a thermal step whose impact on residual mechanical strength and microstructural cracking was not experimentally quantified. Consequently, the authors suggest that this functionalization strategy is presently best suited for non-structural, precast facade elements and decorative panels where load-bearing capacity is not critical. Future studies should focus on testing photoinactivation against airborne bioaerosols in dynamic airflow chambers, assessing long-term mechanical abrasion resistance, and refining formulations using thermally resilient binders such as alkali-activated geopolymers. Addressing these material challenges and formalizing standardized environmental safety assessments will be vital for scaling waste-derived photocatalytic mortars into durable commercial products capable of passive urban air purification and antimicrobial protection in architectural settings.

Subject of Research: Photocatalytic nitrogen oxide abatement and bacterial photoinactivation by titanium dioxide coated red mud cement mortars under visible light

Article Title: Visible-light-driven photocatalytic NOₓ abatement and bacterial photoinactivation by TiO₂-coated red mud–cement mortar substrates through Fe₂O₃–TiO₂ interfacial interaction

Article References: Kaur, G., Martinez-de-Tejada, G., Álvarez, J. M. F., Blasco, I. N., Pavia, S., & Álvarez, J. I. (2026). Visible-light-driven photocatalytic NOₓ abatement and bacterial photoinactivation by TiO₂-coated red mud–cement mortar substrates through Fe₂O₃–TiO₂ interfacial interaction. Results in Engineering, 32, Article 113480. https://doi.org/10.1016/j.rineng.2026.113480

Image Credits: AI Generated

DOI: 10.1016/j.rineng.2026.113480

Keywords: photocatalytic oxidation, titanium dioxide, red mud, cement mortar, nitrogen oxide abatement, bacterial photoinactivation, Escherichia coli, visible light photocatalysis, hematite, interfacial charge transfer, pipette-assisted deposition, air purification, bauxite residue valorisation, heterojunction, superoxide radicals, hydroxyl radicals, indoor air quality, construction materials

News Source: Denise Maddox. (November 20, 2026). Titanium Dioxide Coated Red Mud Mortars Degrade Pollutants and Inactivate Bacteria. Scienmag.

Tags: air purificationbacterial photoinactivationbauxite residue valorisationcement mortarconstruction materialsEscherichia colihematiteheterojunctionhydroxyl radicalsindoor air qualityinterfacial charge transfernitrogen oxide abatementphotocatalytic oxidationpipette-assisted depositionred mudsuperoxide radicalstitanium dioxidevisible-light photocatalysis
Share12Tweet7Share2ShareShareShare1

Related Posts

Industrial Solid Wastes Yield Resilient Glass-Ceramics That Immobilize Heavy Metals

Industrial Solid Wastes Yield Resilient Glass-Ceramics That Immobilize Heavy Metals

November 20, 2026
Psychographic Recommender Models Reduce Product Market Concentration and Filter Bubbles

Psychographic Recommender Models Reduce Product Market Concentration and Filter Bubbles

November 20, 2026

Genetic Pathways and AI Help Plants Balance Growth and Pest Defense

November 20, 2026

AHA, West Health, BD Launch Hospital Technology Collaboration

November 20, 2026

POPULAR NEWS

  • Wild Custard Apple Leaf Size and Chemistry Vary Across Ghana Ecologies

    Wild Custard Apple Leaf Size and Chemistry Vary Across Ghana Ecologies

    29 shares
    Share 12 Tweet 7
  • Zanubrutinib Outperforms Older BTK Inhibitors in B Cell Lymphoma Meta-Analysis

    29 shares
    Share 12 Tweet 7
  • Child Care Pressures Spur Female Entrepreneurship Across Urban China via Reduced Compensation

    29 shares
    Share 12 Tweet 7
  • Pandemic Widened Physical Health Gap Between High and Low Earners in Germany

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Industrial Solid Wastes Yield Resilient Glass-Ceramics That Immobilize Heavy Metals

Many Youth Seeking Obesity Treatment Report Moderate to Severe Pain

Pediatric Acute Promyelocytic Leukemia Series Evaluates Outcomes and Intensive Care Needs

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 88 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.