Researchers have developed hybrid polyaniline and tungsten oxide nanocomposite thin films that achieve sensitive nitrogen dioxide gas detection at an operating temperature of 90 degrees Celsius. The experimental study evaluated the gas-sensing performance of the fabricated materials, focusing on how compositional variations alter the chemical and physical properties of the hybrid matrices.
To fabricate the sensing thin films across varied material compositions, the team combined chemical oxidative polymerization, hydrothermal synthesis, and drop-casting techniques. Structural characterization of the resulting films confirmed the formation of phase-pure monoclinic tungsten oxide embedded within a semi-crystalline polyaniline matrix, without secondary phases detected in the hybrid structure.
Crystallographic measurements revealed distinct structural variations across the synthesized material formulations. The average crystallite sizes were determined to be 18.09 nanometers for pure polyaniline, 26.98 nanometers for PAWO1, 16.87 nanometers for PAWO2, 22.35 nanometers for PAWO3, and 29.90 nanometers for pure tungsten oxide.
Morphological and surface investigations using field emission scanning electron microscopy showed that the PAWO2 composition, prepared with an equal ratio of 50 weight percent polyaniline and 50 weight percent tungsten oxide, formed a highly porous interconnected morphology. Nitrogen adsorption testing confirmed that this interconnected structure achieved the highest Brunauer-Emmett-Teller surface area among the samples at 57.48 square meters per gram.
Optical characterization indicated that the optimized PAWO2 material possessed an optical band gap value of 2.45 electron volts. The narrowed band gap and high surface area provided abundant active adsorption sites and facilitated enhanced interfacial charge transfer across the p-n heterojunction formed between the two components.
Gas-sensing evaluations demonstrated that all tested sensor compositions reached their maximum operational response at 90 degrees Celsius. The optimized PAWO2 sensor achieved the highest recorded nitrogen dioxide sensing response of 87.71 percent under these operating conditions.
The PAWO2 device also demonstrated rapid operational dynamics, recording response and recovery times of 22 seconds and 25 seconds, respectively. Furthermore, testing verified high selectivity for nitrogen dioxide gas when compared against potential interfering gases, including carbon dioxide, ammonia, hydrogen sulfide, and ethanol.
The comparative analysis of the crystallite data showed that the dimensions did not follow a simple linear progression across the prepared compositions. The balanced mixture achieved the lowest crystallite dimension among all tested samples, whereas both unmixed components and the other composite ratios exhibited substantially larger crystallites. Consequently, the optimized formulation provided abundant active adsorption sites, maximized the measured surface area, and promoted enhanced interfacial interactions across the composite film.
The fundamental novelty of this work centers on optimizing the material composition to achieve rapid nitrogen dioxide gas detection at a low operating temperature of 90 degrees Celsius. The investigators attributed this superior sensing performance to a synergistic heterojunction mechanism, reduced crystallite size, narrowed band gap, and enhanced interfacial charge transport. Together, these coordinated factors make the optimized hybrid nanocomposite promising for low temperature sensing applications.
Subject of Research: Low-temperature nitrogen dioxide gas sensing using hybrid nanocomposite thin films
Article Title: Low-temperature NO2 gas sensing using PANI/WO3 hybrid nanocomposites with enhanced charge transfer
Article References: Warale, K. N., Gaikwad, A. R., Pardeshi, A. R., Sakhare, N. D., Chavan, A. D., Mane, V. A., Suryawanshi, H. K., & Yenorkar, S. M. (2027). Low-temperature NO2 gas sensing using PANI/WO3 hybrid nanocomposites with enhanced charge transfer. Polymer Bulletin, 84(1), Article 48. https://doi.org/10.1007/s00289-026-06820-9
Image Credits: AI Generated
DOI: 10.1007/s00289-026-06820-9
Keywords: nitrogen dioxide, gas sensors, polyaniline, tungsten oxide, hybrid nanocomposites, thin films, chemical oxidative polymerization, hydrothermal synthesis, crystallite size, band gap, heterojunction, surface area, porous morphology, sensor response, selectivity, chemiresistors
News Source: Bethany Barker. (November 20, 2026). Hybrid Nanocomposite Thin Films Enable Low Temperature Nitrogen Dioxide Gas Sensing. Scienmag.



