Microfluidic devices offer significant potential for enhancing the control of mixing and reaction processes during the fabrication of nanoparticles. Despite their utility, the specific influence of micromixing dynamics on the resulting crystalline nature of synthesized particles has remained poorly understood.
The research team performed a series of numerical simulations over an inlet velocity range of 0.005 to 0.024 meters per second, which corresponds to flow rates between 75 and 360 microliters per minute per inlet. These conditions resulted in Reynolds numbers ranging from 2.5 to 12. By analyzing reactant concentration profiles, residence time, and mixing-index metrics, the team assessed the influence of variables such as flow-rate ratios, reactant concentration, and microchannel geometry on the fluid dynamics.
This window was identified based on the predicted mixing behavior of the chemical precursors.
To validate the computational models, the team conducted experimental flow visualization, which demonstrated a qualitative agreement with the simulated development of concentration fields within the microchannel. Zinc oxide (ZnO) nanoparticles were synthesized under the selected microfluidic operating condition.
The physical characterization of the synthesized nanoparticles revealed notable differences when compared to those produced via traditional batch methods. ZnO nanoparticles synthesized under the controlled microfluidic conditions exhibited an average Scherrer crystallite size of 19.81 nanometers.
Further analysis using dynamic light scattering (DLS) provided insight into the size distribution of the produced particles. The microfluidic-synthesized sample yielded a Z-average hydrodynamic particle size of 612.2 nanometers, with a polydispersity index of 0.4436.
Structural integrity was confirmed through X-ray diffraction (XRD) analysis, which verified the expected hexagonal wurtzite structure of the ZnO nanoparticles. The diffraction patterns also revealed clear differences in peak broadening between the two synthesis methods, further suggesting distinct structural features influenced by the micromixing environment. These findings demonstrate an association between the predicted micromixing response and the observed physical properties of the nanoparticles.
Ultimately, this research establishes that a CFD-guided approach serves as a robust basis for evaluating and refining operating conditions for the controlled continuous flow synthesis of ZnO nanoparticles.
Subject of Research: Microfluidic Synthesis of ZnO Nanoparticles
Article Title: Correlating micromixing dynamics and crystallinity in microfluidic ZnO nanoparticle synthesis through CFD and experimental validation
Article References: Kumar N, P., Bekal, C., Shetty, M., & Reshma I.V., T. (2026). Correlating micromixing dynamics and crystallinity in microfluidic ZnO nanoparticle synthesis through CFD and experimental validation. Discover Materials. https://doi.org/10.1007/s43939-026-01048-w
Image Credits: AI Generated
DOI: 10.1007/s43939-026-01048-w
Keywords: Nanoparticle Synthesis, Microfluidics, Zinc Oxide, CFD, Computational Fluid Dynamics, Crystallinity, Material Science, Laminar Flow, Y-type Microchannel, Particle Size Control, Continuous Flow Synthesis, X-ray Diffraction, Dynamic Light Scattering, Wurtzite Structure, Nanotechnology
News Source: Audrey Campbell. (November 16, 2026). Microfluidic ZnO Nanoparticles Exhibit Smaller Average Crystallite Size Than Batch Synthesis. Scienmag.



