Researchers have developed and experimentally validated a multiphase computational fluid dynamics framework based on an isentropic expansion formulation to establish design-space response surfaces that predict complete ice nucleation across pharmaceutical vial batches during rapid-depressurization freeze-drying. Implemented in Siemens STAR-CCM+, the numerical modeling approach determines the critical process parameters required to achieve uniform ice formation throughout product arrays, addressing the historically stochastic nature of freezing in pharmaceutical manufacturing. The investigation systematically varied initial discharge pressures, shelf temperatures, inert ballast gas types, chamber volumes, and container geometries across conditions representative of laboratory and production scales. Validation trials conducted with ultrapure water in standard 2R and 6R Schott glass vials inside an SP Scientific LyoStar 3 freeze-dryer equipped with ControLyo technology demonstrated that process conditions can be precisely calibrated to secure consistent batch-wide nucleation. By identifying operational boundaries that transition partial nucleation to complete batch success, the study provides a predictive foundation to suppress product variability and enable faster freeze-drying cycles.
Lyophilization serves as an essential stabilization method across pharmaceutical manufacturing, originating during World War II for blood preservation and expanding through annual FDA approvals of lyophilized therapeutics. The standard cycle comprises three successive stages: freezing, primary drying, and secondary drying. During initial freezing, aqueous solutions are supercooled below the equilibrium freezing point of water to stimulate crystal formation. In primary drying, chamber pressure is pulled under vacuum below the triple point of water, allowing ice to sublime directly without melting and extracting 95 to 98 percent of moisture to leave a porous solid matrix. Secondary drying subsequently extracts the remaining 2 to 5 percent of moisture through thermal desorption as temperatures gradually rise. While freezing is critical, conventional protocols lower shelf temperatures at 0.5 to 1.0 degrees Celsius per minute, inducing stochastic supercooling. Excessive supercooling produces small, tortuous pore networks that impede sublimed vapor transport, slow primary drying, lengthen reconstitution times, and compromise finished product quality attributes.
Rapid-depressurization controlled ice nucleation, or RD-CIN, overcomes freezing stochasticity by utilizing rapid gas expansion to simultaneously chill the vial headspace across an entire drying chamber. Vials are loaded onto shelves held initially at 278.15 Kelvin to establish uniform thermal conditions before shelf temperature is lowered below the equilibrium freezing point, supercooling the product while avoiding spontaneous nucleation. The chamber is charged with an inert gas—typically nitrogen or alternatives such as argon or helium—reaching pressures one to two atmospheres above ambient. Once steady state is reached, a depressurization valve opens rapidly, releasing the pressurized gas within seconds to ambient levels in laboratory settings or marginally above atmospheric pressure in commercial units to prevent microbial ingress. The resulting isentropic gas expansion drives a rapid temperature drop throughout the headspace, generating ice particles that collide with the supercooled liquid interface to induce simultaneous nucleation across the entire batch within one to two seconds.
The fluid mechanics governing rapid depressurization within the freeze-dryer chamber are modeled as an adiabatic, reversible isentropic expansion, supported by the low thermal conductivities of nitrogen and argon. Analytical expressions link stagnation pressure to static chamber pressure based on the Mach number and specific heat ratios. Choked flow conditions, occurring when the Mach number reaches unity at the exit valve, establish critical pressure ratios of 1.89 for nitrogen and 2.05 for argon. Because starting pressures exceed these thresholds, depressurization begins in a choked state before transitioning into subsonic flow. The choked regime follows an analytical formulation, whereas the subsequent subsonic phase is solved numerically using fourth-order Runge-Kutta integration. The pressure profile depends on the equipment geometric ratio—chamber volume divided by valve exit area—fitted from experimental data as 335 meters for nitrogen and 369 meters for argon. For nitrogen at 23.6 psig, choked flow lasts 0.387 seconds before transitioning to subsonic discharge, completing depressurization within 1.43 seconds.
To capture macroscopic transport alongside microscale droplet physics, the computational fluid dynamics model couples Eulerian continuum mechanics with Lagrangian discrete parcel tracking within Siemens STAR-CCM+. The continuous phase, containing the inert ballast gas and water vapor, is resolved using Eulerian conservation equations for mass, linear momentum, and energy. Mass conservation incorporates a coupling term that exchanges mass directly with the Lagrangian droplet field during condensation and evaporation under compressible expansion. Momentum conservation accounts for fluid velocity tensors, static pressure gradients, viscous stresses, gravity, and droplet drag feedback. Energy conservation balances local energy density against heat conduction fluxes, external dissipation, wall radiation, and thermal exchange with suspended particles. Because rapid depressurization generates cryogenic temperatures and elevated pressures where ideal gas assumptions fail, the continuum thermodynamic state is resolved using the Soave-Redlich-Kwong real gas equation of state, applying temperature-dependent parameters, critical properties, and acentric factors derived from the inert ballast gas to ensure rigorous vapor-liquid equilibrium predictions.
Discrete water droplets and ice crystals generated in the vial headspace are tracked dynamically as Lagrangian parcels moving through the Eulerian continuum. Simulations commence at headspace conditions of approximately 3 atmospheres and minus 8 degrees Celsius, where no droplets initially exist. As depressurization forces rapid cooling, droplets are seeded according to homogeneous Classical Nucleation Theory modified for extreme supersaturation, evaluated using Murphy and Koop saturation vapor pressure formulations. When supersaturation criteria are satisfied, nuclei are introduced with initial diameters dictated by water density, surface tension, and Gibbs energy barriers. Parcel momentum is updated at each time step by balancing gravity, pressure gradients, and drag governed by the Schiller-Naumann correlation. Droplet mass exchange and convective heat transfer with surrounding gas are calculated using Kang’s analytical expressions. Droplet freezing is determined by a Classical Nucleation Theory survival temperature model under a measured cooling rate of minus 40 Kelvin per second, converting liquid droplets to solid ice via linear interpolation once their threshold is attained.
The computational domain models the headspace of an individual vial, using axial symmetry to simulate one-quarter of the geometry and reduce numerical cost by a factor of four. Fixed unstructured meshes were constructed for standard 2R and 6R vial formats, containing 5,040 cells for 2R geometries and 10,203 cells for 6R geometries, each maintaining a characteristic cell size of 500 micrometers. Boundary conditions define the vial walls, partially seated stopper, stopper outlet, and liquid product interface. The interface is represented as a constant-temperature wall due to the brief depressurization duration, with vapor fractions determined by Antoine’s equation and meniscus curvature solved via the Young-Laplace equation with a measured contact angle of 25 degrees. Vial walls are assigned an emissivity of 0.9 for borosilicate glass radiation, while the stopper opening applies a transient pressure boundary condition. Discretization uses a second-order implicit unsteady scheme with a 0.005-second time step, maintaining a Courant-Friedrichs-Lewy number of unity and 300 iterations per step, accelerated by Convergence Criterion Accelerator and Advanced Multi Grid solvers.
Physical validation experiments were conducted using an SP Scientific LyoStar 3 freeze-dryer equipped with ControLyo technology, utilizing ultrapure water to isolate thermodynamic process parameters from formulation effects. Hexagonal arrays of 61 Schott type I glass vials were positioned at the shelf center, placed at least 15 centimeters from chamber doors to limit external heat transfer, with fill volumes of 0.5 milliliters for 2R vials and 1.5 milliliters for 6R vials. Three T-type thermocouples monitored the central vial at the wall, headspace, and meniscus, logging temperatures within one to two Kelvin of shelf setpoints. A Design of Experiments framework using Latin hypercube sampling mapped initial discharge pressures from 19 to 28 psig and shelf temperatures from 261 to 271 Kelvin. For each vial size and gas combination, 30 initial simulations covered the global domain, followed by 30 simulations focused on transition regions. Experimental trials exhibited modest variability of three to five vials per batch, reflecting stochastic surface nucleation while verifying consistent overall behavior.
The numerical simulations generated response surface maps depicting the percentage of nucleated vials across the design space, validated against experimental observations. On these response surfaces, red iso-contour lines demarcate the operational boundary separating partial nucleation from complete batch nucleation, calibrated to predicted droplet-interface collisions. The surfaces confirm that increasing initial discharge pressure and lowering shelf temperature enhance nucleation across 2R and 6R vials for nitrogen and argon. Nitrogen exhibits stronger temperature sensitivity, whereas argon demonstrates reduced temperature dependence due to its lower thermal conductivity. Because wall-to-headspace temperature differentials exceed 30 Kelvin, argon’s lower conductivity dampens wall-induced buoyancy forces, keeping particle trajectories aligned with pressure-driven exit flow. Consequently, argon requires lower discharge pressures to achieve complete nucleation: at 265.15 Kelvin, 2R vials require 27 psig with nitrogen but only 13 psig with argon, while 6R vials achieve full nucleation at 14 psig with nitrogen and 10 psig with argon.
Evaluating boundary conditions revealed occasional deviations between computational predictions and physical trials, most notably for 6R vials under argon at 9 psig and 265.15 Kelvin, where full experimental nucleation occurred despite zero predicted collisions due to sporadic pre-depressurization heterogeneous nucleation. Furthermore, treating the product interface as a stationary wall makes CFD isocontours conservative approximations. Crucially, rapid depressurization triggers nucleation across all vials within one to two seconds, eliminating inter-vial thermal interactions that spread nucleation across 45 minutes in conventional freezing. Computational analysis of the equipment geometric ratio V/Ae showed that reducing V/Ae from 335 to 315 meters allows full nucleation at warmer shelf temperatures near 267 Kelvin, while increasing it to 355 meters shifts the boundary to 263.5 Kelvin. This dependence directly impacts industrial scale-up, where production freeze-dryers possess much larger chamber volumes without proportional valve area expansion, yielding elevated V/Ae values that slow pressure drops and require calibrated operating conditions to ensure complete batch nucleation.
Subject of Research: Computational fluid dynamics modeling and experimental validation of rapid-depressurization controlled ice nucleation for pharmaceutical lyophilization
Article Title: Design-space modeling of rapid-depressurization controlled ice nucleation for pharmaceutical lyophilization
Article References: Zabalegui Lopez, E., Vorozhbit, E., Meza-Galvan, J., Flynn, I., Kazarin, P., Strongrich, D., Lim, F., Kumar, L., & Alexeenko, A. (2026). Design-space modeling of rapid-depressurization controlled ice nucleation for pharmaceutical lyophilization. AAPS Open, 12(1), Article 43. https://doi.org/10.1186/s41120-026-00177-z
Image Credits: AI Generated
DOI: 10.1186/s41120-026-00177-z
Keywords: lyophilization, controlled ice nucleation, computational fluid dynamics, rapid depressurization, pharmaceutical manufacturing, multiphase modeling, process engineering, freeze drying, Design-space, modeling, rapid-depressurization, controlled
News Source: Audrey Campbell. (November 13, 2026). Design Space Modeling Predicts Controlled Ice Nucleation in Pharmaceutical Freeze Drying. Scienmag.



