• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Wednesday, November 18, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Structural Parameters Strongly Influence Collapse Voltage in Micromachined Ultrasonic Transducers

by
November 8, 2026
in Technology
Reading Time: 6 mins read
0
Structural Parameters Strongly Influence Collapse Voltage in Micromachined Ultrasonic Transducers

Structural Parameters Strongly Influence Collapse Voltage in Micromachined Ultrasonic Transducers

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

A comprehensive investigation into the electromechanical behavior of capacitive micromachined ultrasonic transducers has revealed how structural dimensions and material selections govern device collapse voltage. Researchers utilized three-dimensional finite element modeling within COMSOL Multiphysics alongside an equivalent lumped-parameter analytical formulation to analyze electrostatic actuation and mechanical deflection across single-cell transducer geometries. The numerical simulations demonstrated a device collapse voltage of 108.16 volts, matching the generalized 108-volt benchmark reported for the structure, which demonstrates strong agreement with both analytical calculations and prior experimental datasets. Published literature across the microelectromechanical systems sector establishes that typical capacitive transducer collapse thresholds range between 71 and 135 volts, with comparable physical architectures operating near 134 volts. Systematic evaluations of membrane materials confirmed that silicon nitride delivers superior performance over silicon carbide and diamond by substantially lowering operating voltage requirements while maintaining structural integrity.

Capacitive micromachined ultrasonic transducers represent a versatile microelectromechanical technology capable of generating and detecting acoustic waves by transforming sound energy into electrical signals. Compared to conventional piezoelectric transducers, capacitive micromachined devices offer significant performance advantages, including broadened operational bandwidth, enhanced detection sensitivity, and simplified microfabrication processing. These characteristics make capacitive transducers particularly well suited for non-contact and non-destructive examination of thin metal films, precision gas flow metering, high-intensity ultrasonic therapy, and non-invasive medical imaging. The operational mechanism depends directly on electrostatic actuation, in which an applied bias voltage induces an attractive electrostatic force that pulls a suspended membrane downward toward an underlying substrate. Under regular operating conditions, this attractive electrostatic force is balanced by the internal mechanical restoring force of the elastic actuation layer. However, as the applied bias increases, an imbalance arises between the electrostatic and restoring forces, eventually causing the movable layer to collapse onto the substrate at the critical collapse voltage.

To understand the underlying mechanical and electrical interactions, the authors established an analytical model representing a single transducer cell as an equivalent system of springs, mass, and capacitance. Operating under the assumptions of a vacuum environment, linear elastic restoration, negligible electrical fringing fields, and ideal electrical conductors, the model treats the movable membrane as a mechanical spring with a specific spring constant. Unlike earlier studies that ignored metallization effects or treated them merely as passive mass loading, this formulation models the top electrode as a parallel spring moving synchronously with the membrane under identical bias. The combined spring constant represents the direct sum of the membrane and electrode restoring stiffnesses, determined by their respective Young’s moduli, thicknesses, actuation radius, and Poisson’s ratios. The vibrating mass is calculated from the density, radius, and thickness of the actuation layer, ensuring an accurate dynamic representation of the coupled moving structure.

The analytical formulation derives the electrostatic force by differentiating the capacitive potential energy with respect to membrane displacement. Total capacitance is modeled as the series combination of the cavity gap capacitance and the dielectric actuation layer capacitance, incorporating vacuum permittivity, actuation layer permittivity, active area, and instantaneous displacement. Balancing the dynamic mass acceleration and mechanical restoring forces against the nonlinear electrostatic force yields the governing electromechanical equation of motion. By evaluating static equilibrium conditions and differentiating bias voltage with respect to displacement, setting the derivative to zero identifies the critical pull-in displacement as exactly one-third of the effective cavity gap dimension. Substituting the structural parameters from the finite element model into the resulting closed-form voltage expression produces an analytical collapse voltage of 93.92 volts. This mathematical framework confirms the direct dependency of device collapse thresholds on system spring stiffness, dielectric layer properties, and initial cavity dimensions under idealized operating conditions.

To complement the mathematical derivation with detailed spatial analysis, the researchers constructed a three-dimensional finite element model using COMSOL Multiphysics. Within this simulation environment, boundary conditions are defined such that the peripheral edges of the circular membrane remain completely constrained against both translational displacement and rotational movement, securing the diaphragm firmly along its perimeter. In contrast, the upper surface of the membrane is free to deform in response to applied electrostatic pressure, enabling precise examination of mechanical deformation under bias. The bottom electrode is modeled as a rigid, immovable boundary that serves as a stable reference plane for electromechanical interaction and electric field distribution. To condense computational runtimes without compromising physical accuracy, the geometry was modeled utilizing structural symmetry alongside a refined meshing profile. Analysis of the resulting displacement profiles verified that maximum downward deflection occurs at the geometrical center of the actuation layer, illustrating the characteristic deflection profile expected of clamped circular membranes.

Detailed parametric evaluations demonstrated that membrane geometry strongly influences collapse voltage, with membrane thickness acting as a primary factor governing structural stiffness. As membrane thickness increases, the enhanced flexural rigidity substantially elevates the required collapse voltage across all examined configurations. Among the evaluated membrane materials, silicon nitride consistently produced the lowest collapse voltages for any given thickness, while silicon carbide and diamond exhibited substantially higher pull-in thresholds. The numerical results showed close correlation with the analytical predictions across the investigated range of membrane thicknesses. Furthermore, varying the membrane radius revealed a gradual increase in collapse voltage as the radius expanded. Across identical membrane radii, diamond yielded the highest collapse voltages, silicon carbide produced intermediate values, and silicon nitride maintained the lowest collapse voltages.

Investigations into cavity dimensions revealed that increasing the gap height significantly elevates the collapse voltage across all material combinations. Finite element comparisons against the analytical formulation confirmed excellent agreement regarding gap height variations, while reinforcing silicon nitride as the superior material choice. In parallel, the researchers examined the influence of electrode parameters using aluminum, gold, and copper. Aluminum and gold exhibited virtually identical collapse voltages across varying electrode thicknesses, whereas copper noticeably increased the collapse voltage. Crucially, the simulations demonstrated that electrode thickness exerts a substantially stronger influence on collapse voltage than electrode radius. While expanding electrode radius produced only a small, gradual increase in collapse voltage, increasing electrode thickness resulted in a rapid voltage rise, establishing electrode thickness as a dominant electromechanical design variable.

Beyond static pull-in characteristics, the team analyzed acoustic and dynamic properties by introducing a central vent into the silicon nitride membrane in the absence of a top electrode. Vented radii ranging from 2 micrometers to 12 micrometers were modeled to assess their effect on mechanical displacement profiles and device resonance. The analyses revealed that membrane venting exerts a substantial impact on resonant frequency. Because the vent opening directly influences the acoustic compliance and damping characteristics of the cavity, the vent radius serves as a critical tuning parameter for device dynamics. The simulations indicated that smaller vented radii correspond directly to lower resonant frequencies, whereas expanding the vent radius systematically increases the operating resonance frequency.

The investigation also highlighted an important divergence between classical plate theory and finite element simulations regarding resonance frequency trends across membrane radii. Under classical membrane theory, expanding the membrane radius is expected to lower resonance frequency because the wider span reduces structural stiffness. However, the finite element simulations showed a slight increase in resonance frequency with increasing membrane radius. The researchers attributed this deviation to coupled electrostatic-structural phenomena, including residual membrane stress and electrostatic stiffening effects that are captured in multiphysics modeling but absent from simplified classical models. In addition, evaluations comparing three distinct venting arrangements, venting only the membrane with the top electrode present, excluding the top electrode, and venting both the membrane and top electrode, revealed that the lowest resonance frequency occurs when venting the membrane with the top electrode present. This occurs because the added mass and structural influence of the top electrode reduce overall vibrating stiffness, whereas excluding the electrode or venting both structures yields comparatively higher frequencies.

Stress evaluations indicated that internal mechanical stress plays a critical role in device operation, with silicon nitride exhibiting the highest stress among the investigated membrane materials. Crucially, the simulations demonstrated that higher internal stress lowers the device resonance frequency. Synthesizing structural parameters and material performance, the authors determined that a single-cell transducer featuring a 0.75-micrometer silicon nitride membrane and an aluminum electrode achieves an optimal collapse voltage of 108 volts while ensuring structural reliability. To manufacture such transducers, the study highlights microelectromechanical wafer bonding technology as the most suitable manufacturing approach. Wafer bonding procedures, including anodic, fusion, and adhesive bonding, provide precise control over membrane thickness, cavity gap height, vented configurations, and resonance behavior while reducing fabrication steps and improving turnaround times compared to conventional surface micromachining.

Subject of Research: Electromechanical collapse voltage modeling of capacitive micromachined ultrasonic transducers

Article Title: Investigation on the collapse voltage using different structural parameters of micromachined ultrasonic transducer

Article References: Lalnunfeli, H., Maity, R., Tiwari, R. C., & Maity, N. P. (2026). Investigation on the collapse voltage using different structural parameters of micromachined ultrasonic transducer. Discover Electronics, 3(1), Article 123. https://doi.org/10.1007/s44291-026-00275-y

Image Credits: AI Generated

DOI: 10.1007/s44291-026-00275-y

Keywords: micromachined ultrasonic transducers, CMUT, collapse voltage, finite element modeling, COMSOL Multiphysics, silicon nitride, electrostatic actuation, wafer bonding, Investigation, collapse, voltage, different

News Source: Denise Maddox. (November 8, 2026). Structural Parameters Strongly Influence Collapse Voltage in Micromachined Ultrasonic Transducers. Scienmag.

Tags: CMUTcollapsecollapse voltageCOMSOL Multiphysicsdifferentelectrostatic actuationFinite Element Modelinginvestigationmicromachined ultrasonic transducerssilicon nitrideVoltagewafer bonding
Share12Tweet7Share2ShareShareShare1

Related Posts

Kinematically Controlled 3D Printing Transforms Polymer Stringing into Suspended Tissue Scaffolds

Kinematically Controlled 3D Printing Transforms Polymer Stringing into Suspended Tissue Scaffolds

November 18, 2026
Reusing YOLO Features Cuts Tracking Time but Increases Vehicle Association Disagreement

Reusing YOLO Features Cuts Tracking Time but Increases Vehicle Association Disagreement

November 18, 2026

Recursive Human-AI Interaction Can Make Changes in Violence Representation Visible

November 18, 2026

Hybrid Iterative Model Reveals Oblique Fretting Dynamics in Planetary Gear Systems

November 18, 2026

POPULAR NEWS

  • Machine Learning Predicts Post-Viral Encephalitis Epilepsy Risk Using Routine Tests

    Machine Learning Predicts Post-Viral Encephalitis Epilepsy Risk Using Routine Tests

    29 shares
    Share 12 Tweet 7
  • Barium Titanate Preferentially Localizes in Epoxidized Rubber Blends with Tunable Properties

    29 shares
    Share 12 Tweet 7
  • Multidisciplinary Care Pathway Expedites Hip Fracture Surgery and Shortens Hospital Stay

    29 shares
    Share 12 Tweet 7
  • Caesarean Birth Linked to Greater Childhood Fat Mass in Southampton Cohort

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Reduced Pitch Drill Geometry Lowers Root Stress During Simulated Post Preparation

Systematic Review Finds Existing Planetary Health Literacy Scales Lack Robust Validation

Chemical Screening Detects Psilocybin in Seven Chinese Psilocybe Specimens Across Genera

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 88 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.