Oxygen redox reactions in layered-oxide cathodes offer a promising route to developing high-energy sodium-ion batteries, but poor reversibility has historically limited their practical application. A new study published in Nature Energy presents an iron-mediated redox strategy that substantially improves the reversibility of lattice-oxygen redox. The research, led by Liang Zhang, Jun Lu, Haoshen Zhou, Shaohua Guo and colleagues across China and the USA, demonstrates that integrating iron into the cathode lattice can facilitate the repeated recovery of oxidized oxygen species. This approach addresses a central challenge in battery chemistry: how to utilize oxygen redox without triggering structural degradation or oxygen loss.
Lattice-oxygen redox has emerged as a key mechanism for enabling charge compensation beyond what is achievable with conventional transition-metal redox. However, deeper utilization of oxygen redox typically comes at the expense of reversibility. In many layered oxides used as battery cathodes, oxygen oxidation generates oxygen loss, oxygen-vacancy formation, or trapped hole states. These phenomena contribute to irreversible electrochemical behaviour, including voltage hysteresis and structural degradation. Consequently, previous strategies for oxygen redox cathodes have largely focused on suppressing oxygen activity or stabilizing oxidized oxygen once it is formed.
The researchers took a different approach by actively mediating the oxygen redox process rather than treating it as a problem to be contained. They introduced iron into a Na–Mn–Mg layered oxide cathode with the chemical formula Na2/3Mn7/12Mg1/4Fe1/6O2. In this material, iron operates as a bifunctional internal redox mediator rather than merely a conventional redox-active transition metal. This design allows the iron to interact dynamically with the lattice oxygen throughout the charging and discharging cycles.
During the charge process, electrochemically generated Fe4+ accepts electrons from the lattice oxygen and is chemically reduced to Fe3+. This interaction promotes the formation of oxidized oxygen species. During discharge, the resulting Fe2+ donates electrons back to the oxidized oxygen species and is reoxidized to Fe3+. In effect, iron acts as an internal electron shuttle that closes the oxygen-redox cycle. This coupled cation–anion redox mechanism facilitates the reversible formation and recovery of oxidized oxygen species, minimizing the accumulation of irreversible states.
This mechanism differs fundamentally from traditional redox mediators employed in Li–O2 or Li–S batteries. In those systems, mediators generally facilitate surface reactions through soluble species, shuttling between the electrode surface and soluble reaction species. By contrast, in the work by Zhang, Lu, Zhou, Guo and colleagues, iron is incorporated directly into the cathode lattice. It mediates electron transfer locally between transition-metal and oxygen states within the bulk crystal. This lattice-embedded mediation is particularly attractive because it addresses the challenge of recovering oxidized oxygen without disrupting the structural framework of the host material.
The researchers provided support for this mechanism through a combination of operando spectroscopy and electrochemical measurements. Differential electrochemical mass spectrometry confirmed the absence of detectable oxygen release during cycling. Mapping resonant inelastic X-ray scattering provided direct evidence for highly reversible oxygen redox. The characteristic oxidized-oxygen feature emerged during charge and nearly disappeared upon discharge. This corresponds to an oxygen-redox reversibility approaching 99%, compared with only 75% in the iron-free reference cathodes, which had the composition Na2/3Mn2/3Mg1/3O2.
The role of iron was further revealed by its unusual oxidation-state evolution. In situ Fe K-edge X-ray absorption spectroscopy showed that Fe is initially oxidized during charge before undergoing partial chemical reduction at high voltage. The reverse behaviour occurs during discharge. Consistent with this observation, Mössbauer spectroscopy identified the reversible formation of Fe4+ and Fe2+ intermediates. These findings capture a dynamic electron-exchange process between iron and lattice oxygen. Together, these results provide compelling evidence that iron actively exchanges electrons with lattice oxygen throughout cycling, rather than functioning solely as a conventional charge-compensating redox centre.
This highly reversible oxygen-redox chemistry allows the Fe-containing cathode to sustain a large oxygen-redox contribution while minimizing the accumulation of irreversible oxygen states. The material delivers a reversible capacity of approximately 220 mAh g−1 at a current density of 10 mA g−1. It maintains stable cycling over a period of extended operation. The benefits of this chemistry extend beyond half-cell measurements, indicating potential for full-cell applications.
When paired with a hard-carbon anode, the resulting 15.8-Ah pouch cell achieves an energy density of 206 Wh kg−1 at 50 mA g−1. The cell retains 87.8% of its capacity after 100 cycles. These metrics highlight the practical relevance of improved oxygen-redox reversibility.
Beyond the specific material demonstrated here, the work suggests a potential strategy for designing oxygen-redox cathodes. Zhang, Lu, Zhou, Guo and colleagues show that oxygen-redox reversibility can be enhanced by engineering electron-transfer pathways between transition metals and oxygen. Whether similar mediator-based approaches can be extended to other oxygen-redox chemistries remains an open question. A key challenge will be to identify other transition metals that can access suitable oxidation states within the operating voltage window and exchange electrons with lattice oxygen in both directions.
Importantly, the availability of multiple oxidation states alone may not be sufficient for a mediator to function effectively. Their relative redox potentials must also allow the mediator to accept electrons from oxygen during charge and return them during discharge. The surrounding host structure and composition could therefore play an important part by determining how the redox states of both the mediator and oxygen are energetically positioned. Establishing these relationships across different transition metals and cathode chemistries will be important for determining whether lattice-embedded redox mediation can become a general materials-design principle.
Nevertheless, this study provides a compelling example of how coupled cation–anion redox processes can be harnessed to improve both the reversibility and practical viability of high-energy sodium-ion batteries. By integrating iron into the lattice, the researchers have demonstrated a pathway to substantially improving oxygen-redox reversibility. This work shifts the focus from suppressing oxygen activity to actively managing it, offering a new perspective on the design of next-generation battery cathodes. The findings underscore the potential of lattice-embedded mediators to overcome the limitations that have previously hindered the development of high-energy sodium-ion batteries.
The distinction between this lattice-embedded mediation and traditional surface-based mediators is critical for understanding the material’s stability. In conventional Li–O2 or Li–S battery systems, redox mediators typically operate through soluble species that shuttle electrons across an interface between the electrode surface and reaction products. In the sodium-ion cathode developed by Zhang, Lu, Zhou, Guo and colleagues, iron is fixed within the crystal structure. It mediates electron transfer locally between transition-metal and oxygen states within the bulk material. By keeping the electron exchange contained within the solid lattice, the design aims to preserve the structural integrity of the cathode during repeated charge and discharge cycles.
The experimental validation of this mechanism relies on a multi-technique approach that captures the dynamic behavior of the material in real time. Operando spectroscopy and electrochemical measurements were used to track the oxidation states of both iron and oxygen during cycling. Differential electrochemical mass spectrometry was specifically employed to monitor for gas evolution, confirming that no detectable oxygen was released from the cathode during operation. The combination of these techniques provides a comprehensive view of the internal redox processes, linking the electrochemical performance to the underlying atomic-scale changes.
The spectroscopic data reveals a nuanced sequence of events during the charge and discharge processes. In situ Fe K-edge X-ray absorption spectroscopy shows that iron undergoes an initial electrochemical oxidation during charge. At higher voltages, however, the iron species undergoes partial chemical reduction. This behavior is reversed during discharge, where the iron is reoxidized. Mössbauer spectroscopy further supports this interpretation by identifying the reversible formation of Fe4+ and Fe2+ intermediates. These observations indicate that iron is not acting as a static charge compensator but is actively participating in a dynamic electron-exchange process with the lattice oxygen. The ability to track these specific oxidation states provides direct evidence for the proposed bifunctional role of iron in the redox cycle.
The performance metrics of the full cell demonstrate that the improved reversibility of the cathode translates into practical device benefits. When the Fe-containing cathode is paired with a hard-carbon anode, the resulting 15.8-Ah pouch cell achieves an energy density of 206 Wh kg−1 at a current density of 50 mA g−1. The cell retains 87.8% of its capacity after 100 cycles, indicating good long-term stability.
The study also highlights the specific conditions required for a transition metal to function as an effective redox mediator. It is not sufficient for a metal to simply possess multiple accessible oxidation states. The relative redox potentials of these states must be positioned such that the mediator can accept electrons from oxygen during charge and return them during discharge. This energetic alignment is influenced by the surrounding host structure and composition. The Na–Mn–Mg layered oxide provides a specific chemical environment that facilitates this interaction. Understanding how to tune these energetic positions in other materials will be crucial for extending this strategy to different cathode chemistries. The work suggests that materials design for oxygen-redox cathodes should focus on engineering these electron-transfer pathways rather than merely suppressing oxygen activity.
While the results are promising, the study acknowledges that the generalizability of this approach remains an open question. Identifying other transition metals that can access suitable oxidation states within the operating voltage window is a key challenge for future research. The surrounding host structure plays a critical role in determining the energetics of the redox states, meaning that simple substitution of iron with another metal may not yield the same results. Further investigation is needed to establish the broader principles governing lattice-embedded redox mediation.
Subject of Research: Iron-mediated oxygen redox reversibility in sodium-ion battery cathodes
Article Title: Ironing out oxygen instability
Article References: Eum, D., & Chueh, W. C. (2026). Ironing out oxygen instability. Nature Energy. https://doi.org/10.1038/s41560-026-02153-z
Image Credits: AI Generated
DOI: 10.1038/s41560-026-02153-z
Keywords: sodium-ion batteries, oxygen redox, layered oxide cathodes, iron mediator, lattice oxygen, energy storage, electrochemistry, battery materials, Ironing, oxygen, instability, scientific research
News Source: Faith Mcneil. (November 7, 2026). Iron Mediator Boosts Sodium Battery Oxygen Reversibility. Scienmag.



