Researchers from Sandia National Laboratories, XFlow Energy, and the National Laboratory of the Rockies have developed a computational method that predicts significantly higher cyclic bending loads in parked vertical-axis wind turbines. The study, published as a preprint in Wind Energy Science, introduces an engineering-level approach to assessing vortex-induced vibration (VIV) without relying on expensive, high-fidelity simulations. In a specific case study involving a parked H-rotor vertical-axis wind turbine, the new methodology predicted that edgewise damage-equivalent loads were 2.63 times higher than those calculated by native aeroelastic models. This finding suggests that standard design sweeps may underestimate the fatigue risks associated with wind-driven blade vibrations during stationary or slow-moving conditions.
Detailed simulations of wind-driven blade vibrations typically require supercomputers to resolve the complex fluid-structure interactions accurately. These blade-resolved simulations are computationally intensive and costly, making them impractical for the extensive design sweeps needed to assess loads across various wind speeds and blade orientations. To address this limitation, the authors coupled QBlade’s native aeroelastic response with fixed-body lift and drag spectra. They utilized a calibrated, finite-amplitude response law to model the blade motion, creating a workstation-compatible alternative that allows engineers to evaluate potential damaging wind conditions more efficiently.
The methodology relies on sectional data to set the coefficients for the H-rotor vertical-axis wind turbine. The team trained the same response law using separate blade studies and tested a response map on an excluded tip geometry to validate the approach. The core of the model involves a turbulent-inflow H-VAWT example that compares three distinct simulation methods: native QBlade, Spectral VorLap, and Hybrid VorLap. These comparisons were conducted under prescribed slow idling conditions, which simulate the parked state of the turbine where the rotor is not actively generating power but is still subject to wind forces.
The results indicated that the Hybrid VorLap method increased the conditional edgewise damage-equivalent load by a factor of 2.63 compared to the baseline. However, the study notes that flapwise bending still controls the combined longitudinal stress in the blade.
The authors also compared the parked load conditions with approximate normal operation to understand how fatigue ranking changes under different scenarios. They found that the fatigue ranking depends heavily on wind exposure and the assumed high-cycle material law.
This approach supports the selection of candidate VIV load cases for detailed analysis, allowing engineers to prioritize which conditions require more rigorous, high-fidelity simulation. By identifying potentially damaging wind conditions early in the design process, the method can help avoid unnecessary computational costs associated with running expensive simulations for every possible scenario. The study emphasizes that while the method is effective for screening, it requires application-specific spectral and response data for quantitative use.
The preprint, authored by Kevin R. Moore, Alex Frye, Nathaniel de Velder, Ian D. Brownstein, Benjamin Strom, and Brent J. Summerville, is currently under review for the journal Wind Energy Science. The work is distributed under the Creative Commons Attribution 4.0 License, allowing for wide dissemination and use of the findings.
Subject of Research: Computational methodology for assessing vortex-induced vibration loads in parked vertical-axis wind turbines
Article Title: An Engineering-Level Vortex Induced Vibration Methodology for Parked-Load Assessment
Article References: Moore, K. R., Frye, A., de Velder, N., Brownstein, I. D., Strom, B., & Summerville, B. J. (2026). An Engineering-Level Vortex Induced Vibration Methodology for Parked-Load Assessment. https://doi.org/10.5194/wes-2026-204
Image Credits: AI Generated
DOI: 10.5194/wes-2026-204
Keywords: wind energy, vortex-induced vibration, vertical-axis wind turbine, fatigue loads, aeroelastic simulation, structural engineering, parked loads, computational fluid dynamics, Engineering-Level, Vortex, Induced, Vibration
News Source: Denise Maddox. (November 7, 2026). New Model Predicts Higher Fatigue Loads in Parked Wind Turbines. Scienmag.



