Rice lab improves recipe for valuable chemical

HOUSTON – (April 18, 2022) – Skipping ahead in a line is rude, but sometimes it’s acceptable. Especially for salt.  

The Rice University lab of materials theorist Boris Yakobson shows why in its follow-up to a 2018 study that demonstrated how salt simplifies the formation of valuable 2D molybdenum disulfide (MoS2) with a first-principles analysis of the process that could refine it even further. 

The theoretical study by Yakobson and colleagues Jincheng Lei, Yu Xie and Alex Kutana, all alumni of his lab, and researcher Ksenia Bets shows through the simulation of atom-level energies why salt — particularly iodized salt — lowers the reaction temperature in a chemical vapor deposition (CVD) furnace necessary to form MoS2. 

It does so by helping to skip some steps and leap high energy barriers in conventional CVD growth to yield far more MoS6, an essential precursor to 2D MoS2.

Their study in the Journal of the American Chemical Society focused on how salt lowers activation barriers to enhance the sulfurization of molybdenum oxyhalides, the gas feedstock in MoS2 crystallization. 

MoS2 is a natural compound known in bulk form as molybdenite, and in 2D form is highly coveted for its semiconducting properties, which promise advances in electronic, optoelectronic, spintronic, catalytic and medical applications. But 2D MoS2 remains hard to manufacture in commercial quantities. 

The Rice team first entered the fray when labs in Singapore, China, Japan and Taiwan used salt to make a “library” of 2D materials that combined transition metals and chalcogens. Why it worked so well was a mystery, prompting them to call upon the Yakobson lab’s expertise in modeling materials — even only theoretical ones — from the ground up.

Their comprehensive models show that while the international labs used chloride salts to make their library of materials, the iodide salts commonly found on kitchen tables are better at speeding up the synthesis of MoS2.

“Fast and large-scale synthesis is imperative for the widespread application of MoS2,” Lei said. “We carefully studied the entire growth process, hoping to optimize it as much as possible. It turned out that by simply changing chloride to iodide, one could synthesize MoS2 much faster while at even lower growth temperatures.”

This happens when salt and the precursor form a eutectic, a mixture of substances that melt and solidify at a single temperature that’s lower than the melting points of the constituents.

“After salt-assisted synthesis was shown to enable the growth of many more TMD (transition metal dichalcogenide) compounds than was possible beforehand and significantly improved growth conditions for previously synthesized ones, it became clear that there is something special about this process,” Bets said. 

“Some experimental groups attempted to investigate further, but monitoring the molecular composition of the gas phase under growth conditions is not a simple task,” she said. “Even then, you cannot see the whole picture. 

“We were very thorough, following up on Jincheng’s work on the mechanism of conventional MoS2 growth. We simulated all parts of the process, from sulfurization to the 2D crystal growth. This comprehensive approach paid off.”

In simulations, the Rice team directly observed the entire sulfurization process as oxygen and chlorine atoms were gradually replaced by sulfur in MoO2Cl2, a common precursor, under CVD conditions.

The lab said the eutectic effect may be a common phenomenon in the CVD synthesis of 2D dichalcogenide monolayers, and thus worth continued study.

Lei is now a postdoctoral researcher at Yale University. Xie is now a professor at Xi’an University, China. Kutana is an assistant professor at Nagoya University, Japan. Yakobson is the Karl F. Hasselmann Professor of Engineering and a professor of materials science and nanoengineering and of chemistry.

The Department of Energy, Basic Energy Sciences (DE-SC0012547) and the Welch Foundation (C-1590) supported the research. 

-30-

Read the abstract at https://pubs.acs.org/doi/10.1021/jacs.2c02497.

This news release can be found online at https://news.rice.edu/news/2022/rice-lab-improves-recipe-valuable-chemical.

Follow Rice News and Media Relations via Twitter @RiceUNews.

Related materials:

Salt boosts creation of 2D materials: https://news2.rice.edu/2018/04/18/salt-boosts-creation-of-2-d-materials/

Yakobson Research Group: http://biygroup.blogs.rice.edu

Department of Materials Science and NanoEngineering: https://msne.rice.edu

George R. Brown School of Engineering: https://engineering.rice.edu

Images for download:

https://news-network.rice.edu/news/files/2022/04/0418_SALT-1-web.jpg

Common salt (NaCl) acts as an intermediary in the chemical vapor deposition growth of 2D molybdenum disulfide, speeding the process of its creation. Materials theorists at Rice University discovered that salt and a precursor form a eutectic, which has a lower melting temperature than either of them. (Credit: Jincheng Lei/Rice University)

Located on a 300-acre forested campus in Houston, Rice University is consistently ranked among the nation’s top 20 universities by U.S. News & World Report. Rice has highly respected schools of Architecture, Business, Continuing Studies, Engineering, Humanities, Music, Natural Sciences and Social Sciences and is home to the Baker Institute for Public Policy. With 4,052 undergraduates and 3,484 graduate students, Rice’s undergraduate student-to-faculty ratio is just under 6-to-1. Its residential college system builds close-knit communities and lifelong friendships, just one reason why Rice is ranked No. 1 for lots of race/class interaction and No. 1 for quality of life by the Princeton Review. Rice is also rated as a best value among private universities by Kiplinger’s Personal Finance.