• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Sunday, November 22, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Floating Bread Structured Polymer Spheres Drive Rapid Solar Interfacial Water Evaporation

by
November 21, 2026
in Technology
Reading Time: 6 mins read
0
Floating Bread Structured Polymer Spheres Drive Rapid Solar Interfacial Water Evaporation

Floating Bread Structured Polymer Spheres Drive Rapid Solar Interfacial Water Evaporation

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

Researchers have developed self-floating hollow composite spheres measuring two to three millimeters in diameter that combine polyacrylonitrile and carbon nanotubes to drive solar-driven interfacial water evaporation. Fabricated using a template-free phase transition paired with gas foaming, these spherical evaporators float spontaneously at the water surface, converting incident solar energy into heat directly at the gas-liquid boundary. In laboratory desalination trials under a single sunlight intensity of one kilowatt per square meter, spheres prepared with twelve percent carbon nanotubes achieved an evaporation mass of 4.35 kilograms per square meter over three hours, exceeding pure polymer spheres by 3.4 times. Thermodynamic calculations determined that the twelve percent composite achieved a photothermal conversion efficiency of 91.01 percent, while also removing metal ions and organic pollutants to meet World Health Organization drinking water standards.

The investigation addresses central technical requirements in solar-driven interfacial evaporation, an energy-saving approach designed to produce clean water from saline and contaminated sources. By localizing solar absorption and vaporization at the surface, interfacial evaporation improves energy efficiency compared to conventional bulk heating systems that dissipate thermal energy downward into liquid reservoirs. Although researchers have previously explored graphene variants, metallic nanoparticles, carbon black, and other light absorbers, high molecular weight polymers offer favorable structural flexibility and full solar spectrum absorption driven by molecular vibrations. Earlier studies developed polymer photothermal materials shaped into pyramids, hemispheres, umbrellas, and membranes to regulate heat localization and fluid transport, but many existing devices demand costly precursor chemicals, require complex fabrication steps, and present significant challenges regarding material recovery and post-treatment recycling.

To establish an accessible manufacturing pathway, the researchers employed analytically pure chemical reagents requiring no secondary purification. The synthesis utilized polyacrylonitrile, designated chemically as (C3H3N)n, combined with N,N-dimethylformamide as solvent, multi-walled carbon nanotubes as wide-band light absorbers, and ammonium carbonate as a foaming blowing agent. Additional testing compounds included sodium chloride for simulated seawater, alongside analytical metal salts including ferric chloride, zinc sulfate, nickel sulfate, and copper sulfate, as well as organic dyes comprising rhodamine B, methylene blue, and tetracycline dissolved in deionized water. The initial procedural phase involved dissolving 1.4 grams of polyacrylonitrile into 8.6 grams of N,N-dimethylformamide within a water bath. This mixture was heated to eighty degrees Celsius and stirred with a magnetic stirrer for two to three hours until the polymer solute fully dissolved.

Following complete dissolution of the polymer, the carbon nanotubes were washed with ten milliliters of N,N-dimethylformamide, filtered, and introduced into the polyacrylonitrile solution. The mixture was stirred uniformly and subjected to ultrasonic dispersion for three hours to distribute the nanotubes throughout the viscous medium. After cooling, the team added 1.5 grams of ammonium carbonate, maintaining the mass ratio of ammonium carbonate to polyacrylonitrile between ten and twenty weight percent before resuming ultrasonic treatment. The homogenized suspension was transferred into a twenty-five-milliliter syringe barrel fitted with a needle having an internal diameter of 1.2 millimeters. The liquid was dripped slowly into deionized water at sixty degrees Celsius, where thermal decomposition of ammonium carbonate generated gas. This gas evolution expanded each droplet into a hollow sphere while liquid-liquid phase separation solidified the composite shell. The recovered spheres were rinsed repeatedly, dried at forty degrees Celsius, and produced with carbon nanotube contents of two, five, eight, twelve, and sixteen weight percent.

Spectroscopic analysis verified the chemical composition and physical bonding environment within the prepared hollow composites. In Fourier-transform infrared spectra, distinct absorption bands appeared at 2240, 2920, and 1440 reciprocal centimeters, matching stretching vibrations of cyano groups, carbon-hydrogen bonds, and methylene groups in polyacrylonitrile. Incorporating carbon nanotubes lowered peak transmission intensities by screening cyano groups, but peak positions remained fixed without generating new spectral bands, proving the components formed a physical composite devoid of covalent reactions. X-ray photoelectron spectroscopy of the twelve percent composite revealed carbon 1s at 286 electron volts, nitrogen 1s at 399 electron volts, and an oxygen 1s signal at 530 electron volts originating from trace residual N,N-dimethylformamide trapped during shell solidification. High-resolution carbon 1s spectra resolved peaks for C-C, C≡N, and C=O bonds at 285.51, 286.63, and 288.85 electron volts, while the nitrogen 1s spectrum showed a single peak at 399.6 electron volts.

Optical measurements and thermal evaluations clarified the photothermal conversion mechanisms operating within the buoyant spheres. Ultraviolet-visible spectroscopy across 200 to 1600 nanometers revealed broadband absorption extending from ultraviolet wavelengths into the infrared region, where absorption was particularly pronounced. Under simulated solar light calibrated to one kilowatt per square meter using a xenon lamp, the cross-sectional interface temperature of the floating spheres increased rapidly, reaching 50.1 degrees Celsius within thirty minutes. This rapid thermal rise provided sufficient localized heat for water vaporization at the upper surface. Simultaneously, monitoring the longitudinal section confirmed that the temperature of underlying bulk water increased at a slow rate. This localized thermal behavior demonstrated that the floating composite isolated the upper photothermal zone from bulk water beneath, curtailing downward heat dissipation while preserving continuous fluid supply to the active evaporative interface.

Nitrogen adsorption-desorption analysis defined the porosity and textural parameters governing fluid movement through the composite shells. Sorption isotherms recorded for pure polyacrylonitrile and the twelve percent composite both exhibited type-IV profiles accompanied by an H3 hysteresis loop across the relative pressure range. Comparative isotherm data showed that introducing twelve percent carbon nanotubes generated larger pore dimensions than those observed in unmodified polymer spheres, directly explaining the composite’s superior liquid retention and water delivery capacity. Furthermore, pore-size distribution curves indicated that water storage and transport reached optimal efficiency when the aperture diameter measured fifteen nanometers. This mesoporous internal network facilitated rapid capillary conduction of liquid water from the bulk solution through the spherical wall toward the heated evaporation front.

Scanning electron microscopy established the intricate microstructure of the hollow twelve percent composite spheres, uncovering an architecture that the authors compared to bread. Cross-sectional imaging demonstrated that the spherical shell possessed an interpenetrating open pore network with irregular cavities measuring between 0.5 and 2 micrometers. On the inner shell surface, larger macropores measuring 2 to 4 micrometers coexisted with smaller voids of 200 to 500 nanometers, and substantial quantities of nanofibers adhered across the pore walls, forming conduit pathways that promoted fluid transport and storage. In contrast, the outer shell surface exhibited an uneven topography permeated by dense voids with diameters spanning tens of nanometers. This dual structure—possessing a compact, void-rich outer surface and a porous, loose interior—promoted structural stability while enhancing multiple internal reflections and refractions of incoming sunlight, thereby increasing light absorption efficiency.

Quantitative seawater evaporation experiments confirmed that carbon nanotube concentration critically dictates interfacial vapor generation. Desalination tests were performed using a 3.5 weight percent sodium chloride solution held in a 100-milliliter beaker with an inner diameter of 52 millimeters under one sun of xenon illumination. Pure polyacrylonitrile spheres produced the lowest cumulative evaporation, yielding 1.29 kilograms per square meter after three hours. Adding carbon nanotubes systematically enhanced evaporation rates across two, five, eight, and twelve percent loadings, peaking at 4.35 kilograms per square meter for the twelve percent composite. However, increasing nanotube fraction to sixteen percent caused evaporation to decline. At fixed polymer and solvent ratios, excessive carbon nanotubes increased slurry viscosity and impaired uniform dispersion, forming thicker, heavier shells that reduced buoyancy, lowered exposed solar surface area, and restricted internal interconnected water channels.

Evaluating the twelve percent composite in high-salinity solutions demonstrated how dissolved salt concentrations modify evaporation dynamics. In aqueous solutions containing ten, fifteen, and twenty weight percent sodium chloride, evaporation rates progressively decreased to 1.32, 1.11, and 0.75 kilograms per square meter per hour. The authors attributed this reduction to heightened solution viscosity, which slowed capillary fluid delivery, coupled with depressed saturated vapor pressures characteristic of concentrated saline environments. To evaluate operational stability and salt resistance, the researchers conducted a continuous ten-hour seawater desalination experiment using the twelve percent composite. Throughout this ten-hour test, the water evaporation rate remained basically unchanged without visible salt precipitation on the spheres. This operational stability resulted from the numerous voids and micro-nanochannels in the spherical shells, where the transport rate of seawater exceeded the rate of water evaporation, preventing salt accumulation.

The investigation also confirmed that the hollow composite spheres can decontaminate diverse chemical impurities from wastewater. Using simulated sewages prepared with initial pollutant concentrations of 0.1 gram per liter, the team tested solutions containing organic compounds—rhodamine B, methylene blue, and tetracycline—alongside heavy metal ions comprising copper, iron, zinc, and nickel. After solar evaporation using the twelve percent composite spheres, inductively coupled plasma mass spectrometry and optical measurements confirmed substantial reductions in contaminant levels in the collected distilled water. Concentrations of copper, iron, zinc, and nickel all decreased below drinking water safety limits defined by World Health Organization standards. Likewise, levels of rhodamine B, methylene blue, and tetracycline were markedly lowered to meet potability criteria, confirming that the hollow composite system operates effectively as a dual-function technology for seawater desalination and industrial wastewater purification.

In their concluding evaluation, the researchers highlighted that combining template-free phase inversion with gas foaming establishes an efficient manufacturing route that eliminates the complicated synthesis and removal of sacrificial templates. By pairing weather-resistant polyacrylonitrile with broadband-absorbing carbon nanotubes, the millimeter-sized spheres achieve an interpenetrating open pore network that facilitates internal water storage and rapid fluid transport to the evaporative interface. The self-floating composite maintained durable evaporation performance over ten hours of continuous operation and proved easy to collect and recycle from the water surface after use. The authors noted that this fabrication strategy provides an energy-saving and environmentally friendly approach for designing industrialized solar-driven evaporators capable of addressing freshwater shortages through effective seawater desalination and wastewater remediation.

Subject of Research: Solar interfacial water evaporation using bread-structured hollow polymer composite spheres

Article Title: Hollow spheres with bread like structure for solar-driven interfacial water evaporation

Article References: Zhang, K., Sun, H., Wang, F., Yang, Q., Mi, H., & Xu, S. (2026). Hollow spheres with bread like structure for solar-driven interfacial water evaporation. Journal of Nanoparticle Research, 28(12), Article 300. https://doi.org/10.1007/s11051-026-06826-4

Image Credits: AI Generated

DOI: 10.1007/s11051-026-06826-4

Keywords: solar-driven interfacial evaporation, polyacrylonitrile, carbon nanotubes, hollow spheres, seawater desalination, photothermal conversion, gas foaming method, phase transformation, wastewater treatment, ammonium carbonate, heavy metal removal, rhodamine B, methylene blue, tetracycline, porous microstructure, water purification, solar steam generation

News Source: Neil Sanderson. (November 21, 2026). Floating Bread Structured Polymer Spheres Drive Rapid Solar Interfacial Water Evaporation. Scienmag.

Tags: ammonium carbonatecarbon nanotubesgas foaming methodheavy metal removalhollow spheresmethylene bluephase transformationphotothermal conversionpolyacrylonitrileporous microstructurerhodamine Bseawater desalinationsolar steam generationsolar-driven interfacial evaporationtetracyclinewastewater treatmentwater purification
Share12Tweet7Share2ShareShareShare1

Related Posts

Satellite Greenness Links to City Nitrogen Dioxide Weaken Sharply Under Spatial Validation

Satellite Greenness Links to City Nitrogen Dioxide Weaken Sharply Under Spatial Validation

November 22, 2026
Regional Climate Simulations Reveal Non-Uniform Future Shifts in Canadian Maximum Precipitation

Regional Climate Simulations Reveal Non-Uniform Future Shifts in Canadian Maximum Precipitation

November 22, 2026

Truncated Pyramid Voids Preserve Flexural Strength in Concrete Slabs Under One-Way Bending

November 22, 2026

Microcurrent Signals Precede Failure in Loaded Composite Coal-Rock Structures

November 22, 2026

POPULAR NEWS

  • Regional Climate Simulations Reveal Non-Uniform Future Shifts in Canadian Maximum Precipitation

    Regional Climate Simulations Reveal Non-Uniform Future Shifts in Canadian Maximum Precipitation

    29 shares
    Share 12 Tweet 7
  • Single-Cell Sequencing Uncovers How STAP2 Drives Diabetic Retinal Vascular Dysfunction

    29 shares
    Share 12 Tweet 7
  • Heterozygous BRCA1 Mutations Disrupt Ovarian Blood Vessel Formation Before Cancer Develops

    29 shares
    Share 12 Tweet 7
  • Portable Microfluidic Platform Quantifies Post-Transplant Viral Infections at Point of Care

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Satellite Greenness Links to City Nitrogen Dioxide Weaken Sharply Under Spatial Validation

Japanese Neonatal Care Shows Higher Survival for Infants Under 24 Weeks

Regional Climate Simulations Reveal Non-Uniform Future Shifts in Canadian Maximum Precipitation

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 89 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.