• HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
Thursday, November 19, 2026
BIOENGINEER.ORG
No Result
View All Result
  • Login
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
  • HOME
  • NEWS
  • EXPLORE
    • CAREER
      • Companies
      • Jobs
        • Lecturer
        • PhD Studentship
        • Postdoc
        • Research Assistant
    • EVENTS
    • iGEM
      • News
      • Team
    • PHOTOS
    • VIDEO
    • WIKI
  • BLOG
  • COMMUNITY
    • FACEBOOK
    • INSTAGRAM
    • TWITTER
No Result
View All Result
Bioengineer.org
No Result
View All Result
Home NEWS Science News Technology

Industrial Waste Concrete Cuts Pavement Carbon Emissions While Maintaining Structural Durability

by
November 19, 2026
in Technology
Reading Time: 6 mins read
0
Industrial Waste Concrete Cuts Pavement Carbon Emissions While Maintaining Structural Durability

Industrial Waste Concrete Cuts Pavement Carbon Emissions While Maintaining Structural Durability

Share on FacebookShare on TwitterShare on LinkedinShare on RedditShare on Telegram

A research team investigating the upcycling of industrial by-products into sustainable construction infrastructure has developed an environmentally friendly pervious concrete using coal gangue and ground granulated blast furnace slag. Published in the journal Low-carbon Materials and Green Construction, the experimental investigation reveals that partially replacing cement with a tailored combination of coal gangue micro-powder and blast furnace slag significantly optimizes mechanical strength, frost durability, and overall carbon efficiency. Pervious concrete is recognized for its interconnected void network, typically comprising a porosity between 15% and 25%, which enables rainwater infiltration, surface runoff reduction, and urban waterlogging mitigation. However, traditional formulations remain reliant on energy-intensive Portland cement, which contributes substantial greenhouse gas emissions during production, primarily through the high-temperature calcination of calcium carbonate into calcium oxide and carbon dioxide. To curb these emissions while expanding industrial solid waste recycling, the researchers analyzed the synergistic interplay of solid waste binders and alternative aggregates within permeable concrete matrices.

The experimental framework utilized raw materials sourced from Ningxia, China, specifically incorporating P.O 42.5R Portland cement, mechanically processed coal gangue micro-powder, and S95-grade ground granulated blast furnace slag as supplementary cementitious materials. To maximize waste utilization, crushed and screened coal gangue sand with a fineness modulus of 2.85 served as fine aggregate, while municipal solid waste incineration slag and natural crushed stone aggregate, both sized between 5 mm and 10 mm, served as coarse aggregates. The coal gangue was crushed, sieved through a 0.15 mm mesh, and ball-milled in an omnidirectional planetary ball mill at 350 revolutions per minute for two hours, yielding a micro-powder with a median D50 particle size of 8.15 micrometers. In parallel, the blast furnace slag, containing over 80% combined calcium oxide, silicon dioxide, and aluminum oxide by mass fraction, was milled at 380 revolutions per minute for two hours. This mechanical refinement process notably augmented the surface active sites of the slag, facilitating the chemical participation of its constituent oxides in secondary hydration reactions.

The researchers established a structured mix proportion design divided into single-doping and composite-doping schemes to evaluate material performance across multiple replacement levels. In the single-admixture series, coal gangue micro-powder replaced cement at mass fractions of 10%, 20%, 30%, and 40%. In the composite-admixture series, the total mineral admixture substitution was maintained at a constant 30% replacement level, testing coal gangue to slag ratios of 1:1, 2:1, and 1:2, designated respectively as the G15S15, G20S10, and G10S20 formulations. Following casting and a standard 24-hour standing period in a steam curing room at 20 degrees Celsius and over 95% relative humidity, specimens were continuously cured under identical conditions until testing at 7 days and 28 days. Testing procedures strictly followed standard concrete evaluation guidelines, including standard mechanical loading rates of 0.3 MPa per second for compressive strength and 0.03 MPa per second for splitting tensile and flexural strengths across multiple replicates.

Mechanical testing demonstrated that single-doping of coal gangue micro-powder caused an uninterrupted decline in structural capacity across all curing ages. When gangue powder replacement increased from 10% to 40%, the 28-day compressive strength dropped by 10.04% to 41.05% relative to the control group without waste replacement. Standard road paving specifications require pervious concrete to achieve a 28-day compressive strength of at least 20 MPa and a flexural strength of at least 2.5 MPa. Single-doping dosages exceeding 10% failed to satisfy this benchmark, as exemplified by the 30% single-gangue mixture achieving only 16.9 MPa. Microstructural analysis revealed that because coal gangue micro-powder possesses limited pozzolanic activity, it primarily acts as an inert physical filler rather than participating in cementitious hydration. Under compressive loading, single-doped specimens exhibited weak contact nodes between aggregate particles and the surrounding cement paste, resulting in premature node failure and localized spalling along the specimen sidewalls.

In stark contrast, co-doping coal gangue with granulated blast furnace slag produced significant synergistic performance improvements across mechanical categories. Among all evaluated 30% total replacement blends, the G10S20 formulation incorporating 10% coal gangue micro-powder and 20% blast furnace slag achieved the highest performance benchmarks. This mix achieved a 7-day compressive strength of 19.8 MPa and reached a 28-day compressive strength of 24.6 MPa alongside a flexural strength of 3.5 MPa, surpassing regulatory minimums. In splitting tensile testing, the G10S20 group reached 3.78 MPa at 28 days, representing a 56.2% increase compared to the single-doped 30% gangue mixture and a 4.4% improvement over the control concrete without mineral admixtures. Failure surface examinations showed that higher slag proportions strengthened the cementitious paste and enhanced matrix-aggregate adhesion, allowing the paste and aggregate to jointly sustain applied structural loads without forming through-penetrating surface fractures.

Evaluation of hydraulic properties revealed that incorporating these mineral admixtures directly altered the water permeability and effective porosity of the pervious concrete. The unmodified reference concrete exhibited an initial permeability coefficient of 3.5 mm per second and an effective porosity of 18.3%. Single additions of coal gangue powder progressively reduced permeability by 5.71% to 48.57% across the 10% to 40% substitution range. In composite mixtures, increasing the slag content further lowered permeability and effective porosity; the G10S20 mixture recorded a permeability coefficient of 1.9 mm per second, while a full 30% slag substitution recorded 1.7 mm per second and 14.7% porosity. Cross-sectional image analysis using Image-Pro Plus confirmed that fine admixture particles redistributed the internal pore geometry. Pores between 1 mm and 2 mm in equivalent diameter became more numerous and evenly dispersed, while larger void spaces exceeding 2 mm were systematically filled and refined by secondary hydration gels, producing a strong linear correlation between equivalent pore diameter and measured permeability coefficients.

Durability under harsh environmental conditions was quantified through rapid freeze-thaw cycle testing, tracking mass loss rates, relative dynamic elastic modulus, and compressive strength degradation over 75 consecutive cycles. The loss rate of compressive strength emerged as the most sensitive parameter for assessing freeze-thaw damage, reaching established failure thresholds earlier than mass loss or dynamic modulus. Single-doped gangue concrete exhibited severe freeze-thaw degradation, with the 30% and 40% gangue groups exceeding the maximum allowable 20% strength loss after only 30 cycles. Conversely, increasing the proportion of blast furnace slag markedly suppressed structural degradation. The G10S20 composite specimens exhibited superior frost resistance, displaying a compressive strength loss rate of only 16.3% after 30 cycles. X-ray diffraction patterns confirmed that reactive silica and alumina from the slag reacted with calcium hydroxide to produce additional calcium silicate hydrate gel, reducing interfacial calcium hydroxide enrichment, densifying the cement matrix, and resisting frost-heaving stresses caused by internal ice formation.

A comprehensive life cycle assessment evaluating system boundaries from material extraction through construction, maintenance, and end-of-life disposal demonstrated substantial carbon reduction benefits. Assuming standard transportation distances of 50 km using diesel transport trucks, the material production stage accounted for the largest share of emissions, representing between 77.47% and 81.72% of total lifecycle emissions due to cement processing. For a baseline design life of 15 years, the life-cycle carbon emissions for one cubic meter of G10S20 pervious concrete totaled approximately 351.577 kg of carbon dioxide equivalent. This reflects a 14.28% reduction compared to normal non-pervious concrete pavement at 410.148 kg and a 14.80% reduction compared to standard pervious concrete pavement at 403.594 kg. When accounting for the G10S20 material’s superior frost durability, the maintenance interval was extended from once every year to once every two years, further lowering lifecycle maintenance emissions by 33.3% down to 31.5 kg of carbon dioxide equivalent per cubic meter.

Economic analyses modeling a simulated road section measuring 1 km in length, 5 m in width, and 22 cm in thickness demonstrated clear financial advantages for the solid waste composite design. Initial construction costs for the G10S20 pavement were calculated at approximately 76,300 USD, representing a 22.38% reduction compared to normal concrete pavement at 98,300 USD and a 14.46% savings over conventional pervious concrete pavement at 89,200 USD. Incorporating the extended two-year maintenance schedule reduced the total lifecycle cost of the G10S20 pavement to 71,797.10 USD per kilometer, achieving overall cost savings of 27.0% compared to normal pavement and 25.4% compared to conventional permeable surfaces. Monte Carlo uncertainty simulations comprising 5,000 iterations verified high statistical stability, yielding coefficients of variation below 8% across carbon and cost parameters, with cement price and emission coefficients identified as the most influential variables.

The authors concluded that while the single substitution of coal gangue micro-powder degrades mechanical and hydrological characteristics, compounding coal gangue with ground granulated blast furnace slag at an optimal 1:2 ratio achieves an effective balance of structural integrity, freeze-thaw durability, low-carbon efficiency, and economic viability. The resulting G10S20 concrete satisfies standard engineering benchmarks for light-traffic installations, demonstrating direct utility for municipal footpaths, public squares, and park walkways. The research team noted that future investigations should explore chemical activation techniques to stimulate the low pozzolanic reactivity of coal gangue micro-powder, alongside aggregate gradation optimizations designed to recover water permeability without sacrificing the dense, frost-resistant binder structure achieved through slag co-doping.

Subject of Research: Sustainable pervious concrete incorporating coal gangue and blast furnace slag

Article Title: Development of sustainable pervious concrete: effects of coal gangue and GGBS on strength, frost resistance, and carbon efficiency

Article References: Zhu, H., Ma, Y., Zhang, D., Mao, M., & Li, J. (2025). Development of sustainable pervious concrete: effects of coal gangue and GGBS on strength, frost resistance, and carbon efficiency. Low-carbon Materials and Green Construction, 3(1), Article 25. https://doi.org/10.1007/s44242-025-00082-w

Image Credits: AI Generated

DOI: 10.1007/s44242-025-00082-w

Keywords: pervious concrete, coal gangue, ground granulated blast furnace slag, industrial solid waste, supplementary cementitious materials, compressive strength, frost resistance, water permeability, pore structure, life cycle assessment, carbon emissions reduction, cost analysis, freeze-thaw durability, concrete pavement, sponge city infrastructure, sustainable building materials

News Source: Sloane Callahan. (November 19, 2026). Industrial Waste Concrete Cuts Pavement Carbon Emissions While Maintaining Structural Durability. Scienmag.

Tags: Carbon emissions reductioncoal ganguecompressive strengthconcrete pavementcost analysisfreeze-thaw durabilityfrost resistanceground granulated blast furnace slagindustrial solid wastelife cycle assessmentpervious concretepore structuresponge city infrastructuresupplementary cementitious materialssustainable building materialswater permeability
Share12Tweet7Share2ShareShareShare1

Related Posts

AI Shows Predictive Utility in HIV Care but Lacks Real-World Clinical Evidence

AI Shows Predictive Utility in HIV Care but Lacks Real-World Clinical Evidence

November 19, 2026
HoErNi Microwires Enhance Cryogenic Magnetocaloric Performance for Magnetic Hydrogen Liquefaction Systems

HoErNi Microwires Enhance Cryogenic Magnetocaloric Performance for Magnetic Hydrogen Liquefaction Systems

November 19, 2026

Degree of Nondensifiability Yields New Multivalued Fixed Point Theorems in Banach Algebras

November 19, 2026

Geometric Optimization Boosts Sprag Clutch Slippage Torque Capacity by 43 Percent

November 19, 2026

POPULAR NEWS

  • Updated ArrayAnalysis Platform Expands Interactive Analysis for Microarray and RNA-seq Data

    Updated ArrayAnalysis Platform Expands Interactive Analysis for Microarray and RNA-seq Data

    29 shares
    Share 12 Tweet 7
  • Stem Cells in Pituitary Tumors Show Multilineage Endocrine Potential

    29 shares
    Share 12 Tweet 7
  • Biotechnology Advances Expand Broodstock Management and Artificial Reproduction in Rainbow Trout

    29 shares
    Share 12 Tweet 7
  • Non-Vascular Ehlers-Danlos Surgery Carries High Complication Rates but No Life-Threatening Risks

    29 shares
    Share 12 Tweet 7

About

We bring you the latest biotechnology news from best research centers and universities around the world. Check our website.

Follow us

Recent News

Guava Leaf Extract Inhibits Acetylcholinesterase in Chicken and Fish Brain Models

Researchers Isolate Four Tryptophan Cyclic Dipeptides from Cordyceps Militaris

Scoping Review Maps Decade of Patient Safety and Healthcare Quality Research in Israel

Subscribe to Blog via Email

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 89 other subscribers
  • Contact Us

Bioengineer.org © Copyright 2023 All Rights Reserved.

Welcome Back!

Login to your account below

Forgotten Password?

Retrieve your password

Please enter your username or email address to reset your password.

Log In
No Result
View All Result
  • Homepages
    • Home Page 1
    • Home Page 2
  • News
  • National
  • Business
  • Health
  • Lifestyle
  • Science

Bioengineer.org © Copyright 2023 All Rights Reserved.