A comprehensive review published in the Journal of Materials Science establishes that the catalytic performance of high-entropy electrocatalysts is fundamentally governed not by their pristine nominal bulk composition, but by dynamic surface reconstruction that occurs under electrochemical reaction conditions. High-entropy materials combine five or more principal elements distributed within a shared structural framework, providing an expansive compositional playground for tuning electronic structures, defect chemistry, and adsorption energetics across reactions such as the oxygen evolution reaction, hydrogen evolution reaction, and carbon dioxide reduction. However, researchers emphasize that the catalyst present at synthesis is rarely the working catalyst operating under an applied electrochemical bias. Because multicomponent materials encompass millions of plausible local atomic environments, surface energy differences, and redox tendencies, operational exposure triggers extensive surface rewriting. This mismatch between the nominal pre-catalyst and the working active-state ensemble requires viewing reconstruction not as an unwanted degradation event, but as an indispensable physical pathway that dictates catalytic activity, selectivity, and operational durability.
The review categorizes electrochemical surface reconstruction into three principal, interconnected mechanism families: compositional redistribution, chemical-state transformation, and structural evolution. Compositional redistribution encompasses phenomena such as surface segregation, subsurface rearrangement, selective dissolution, dealloying, and redeposition. Under an applied anodic or cathodic bias, constituent elements with differing oxophilicities, surface energies, and solvation stabilities migrate or dissolve unevenly. For instance, more oxophilic elements frequently enrich at the outermost surface layers during anodic reactions, creating an active surface layer that possesses a much higher concentration of active motifs than suggested by the nominal bulk ratio. A high-entropy alloy containing only twenty percent nickel can segregate under operating conditions into a nickel-enriched active exterior tuned by neighboring subsurface elements, effectively multiplying the density of working catalytic sites. Beneath the topmost surface, vacancy-mediated diffusion and atomic exchange can reorganize subsurface layers into compositionally graded zones that modulate local strain and preserve framework integrity.
Selective dissolution and dealloying serve as prominent drivers of this compositional restructuring, often acting as intentional activation routes rather than simple degradation pathways. In multicomponent systems like nanoporous manganese-iron-cobalt-nickel-copper or iron-cobalt-nickel-molybdenum-tungsten alloys, the sacrificial leaching of unstable or labile elements dramatically alters local stoichiometry and exposes active coordination environments. In iron-cobalt-nickel-copper-iridium nanoparticles evaluated under acidic oxygen evolution conditions, initial activation selectively dissolves iron, cobalt, nickel, and copper from the near-surface region, leaving an iridium-rich shell approximately two to six nanometers thick with iridium concentrations reaching sixty-five to seventy-five atomic percent around an intact high-entropy core. Similarly, in iron-cobalt-nickel-molybdenum-tungsten systems, the selective leaching of molybdenum and tungsten produces an active oxyhydroxide-rich shell dominated by iron, cobalt, and nickel, while retaining the complex core. Dissolved species can also redeposit locally onto electrode surfaces or conductive supports, establishing dynamic exchanges that continuously refresh active motifs throughout prolonged electrochemical operation.
Chemical-state transformation forms the second major mechanism family, wherein initial metallic, sulfide, phosphide, or borate phases convert into catalytically active oxidized, hydroxylated, or oxyhydroxylated surfaces under working potentials. Because each constituent element possesses distinct redox potentials and coordination preferences, oxidation and reduction proceed heterogeneously across the surface. During the oxygen evolution reaction, metallic high-entropy alloys and metal compounds commonly self-reconstruct into metal (oxy)hydroxide layers, as evidenced in iron-cobalt-nickel-palladium-platinum systems and amorphous high-entropy borates. In iron-cobalt-nickel-molybdenum-tungsten catalysts, in situ Raman spectroscopy confirms that increasing anodic potential attenuates original oxide features while triggering the emergence of distinct oxyhydroxide bands at 467, 548, and 667 inverse centimeters, with the prominent 467 inverse centimeter band assigned to nickel-oxygen vibrations in gamma-phase nickel oxyhydroxide. Furthermore, constituent metals oxidize to unequal extents; in reconstructed iron-cobalt-nickel-palladium-tungsten phosphides, X-ray absorption analysis revealed that iron oxidation states increased slightly from 3.0 to 3.1, while cobalt and nickel oxidation states increased markedly from 1.4 and 2.0 to 3.3 and 3.8, respectively, forming edge-sharing octahedral networks.
Chemical transformation is also modulated by the retention or incorporation of electrolyte-derived ionic species, demonstrating that the resulting active state is frequently an impure, functionally modified compound. In sulfate-containing chromium-manganese-iron-cobalt-nickel disulfide electrocatalysts, operando Raman and X-ray photoelectron spectroscopy show that anodic polarization diminishes sulfide components while generating a disordered, partially amorphous multimetal oxyhydroxide that tenaciously retains sulfate-related sulfur-oxygen environments. These retained anions modulate local electronic properties and hydroxide coordination, enhancing catalytic turnover. Structural and morphological evolution, the third mechanism family, frequently accompanies these chemical changes through amorphization, crystalline phase transformation, facet reshaping, and defect generation. High-entropy materials possess intrinsic lattice distortion and frustrated bonding, which lower the energetic barriers for atomic rearrangement under potential bias. In chromium-iron-cobalt-nickel-molybdenum nanoparticles, increasing molybdenum content induces atomic-scale amorphization and oxygen-vacancy generation, producing a disordered coordination environment that optimizes intermediate binding during water oxidation.
Structural evolution also generates sophisticated layered and core-shell architectures that stabilize working surfaces through dynamic self-replenishment. In nanoporous iron-cobalt-nickel-niobium alloys, reconstruction forms an outer multicomponent amorphous oxide layer responsible for the oxygen evolution reaction, underpinned by an inner amorphous niobium-oxide-rich layer that acts as an elemental reservoir to replenish leached components during long-term polarization. Operation can also trigger macroscopic facet reshaping and roughening without destroying the conductive catalyst architecture. In three-dimensional porous magnesium-iron-cobalt-nickel-boron catalysts, electrocatalytic operation drives the growth of iron-rich needle-shaped nanowires that significantly increase the exposure of edge, corner, and undercoordinated active sites. Particles can also undergo ripening, coalescence, or chemical etching that hollows solid structures into open nanoframes, as demonstrated by the selective chemical etching of palladium-core high-entropy alloy shells into three-dimensional open frames with subnanometer-thick active surfaces.
The review cautions against attributing all observed stability in high-entropy electrocatalysts exclusively to bulk configurational entropy, establishing a conceptual framework grounded in thermodynamic, kinetic, and chemical-buffering influences. While configurational entropy can thermodynamically suppress large-scale phase separation by lowering the free energy of the mixed solid solution, bulk entropy cannot entirely override the aggressive chemical potentials, solvation forces, and electric fields present at the electrochemical interface. Kinetic effects, such as sluggish atomic diffusion across distorted lattices, can retard vacancy migration, surface segregation, and structural coarsening, but kinetic retardation rarely halts surface reconstruction entirely. Instead, stability frequently stems from chemical buffering, where multi-element diversity distributes redox transformations across multiple distinct local environments. More oxophilic elements oxidize to form protective or active surface coatings, while less oxophilic, noble components maintain metallic, conductive pathways underneath. Genuine stability under operation therefore commonly reflects the stabilization of a reconstructed active-state ensemble rather than the passive preservation of the pristine precursor structure.
Accurately identifying and verifying these evolving active surfaces requires moving beyond isolated ex situ techniques toward integrated, multimodal characterization workflows. Conventional ex situ electron microscopy and diffraction define initial precursor baselines and postmortem endpoints, but washing, drying, and potential removal allow metastable active motifs to relax, re-oxidize, or dehydrate before measurement. Quasi-in situ methods, such as transferring conditioned electrodes to X-ray photoelectron spectrometers under inert gas or cryogenic conditions, effectively freeze short-lived intermediates and capture potential-dependent surface oxidation without ambient contamination. Nonetheless, true active-state tracking demands operando spectroscopy and microscopy conducted under active potential bias while simultaneously measuring catalytic current. Combining element-specific operando X-ray absorption spectroscopy, in situ Raman spectroscopy, low-energy ion scattering, and atom probe tomography resolves oxidation trajectories, local coordination numbers, and shallow surface-to-subsurface gradients that are otherwise obscured by ensemble volume averaging.
Computational and artificial intelligence strategies are increasingly essential to navigate the combinatorial complexity of high-entropy electrocatalysis, but they must be constrained by realistic surface evolution models. Standard density functional theory calculations on static, bulk-terminated slabs fail to represent the working catalyst because they neglect potential-dependent coverage, surface segregation, and dynamic disorder. Hierarchical computational workflows resolve this by using density functional theory to calculate reference energetics, training cluster expansions and Monte Carlo simulations to model temperature- and potential-dependent segregation, and utilizing machine learning interatomic potentials to simulate large-scale atomic restructuring and defect dynamics. Generative models, Bayesian optimization, and active learning iteratively sample high-dimensional composition spaces, but their predictive accuracy depends heavily on incorporating experimental boundary conditions such as observed leaching rates, oxidation states, and reconstructed shell thicknesses.
Ultimately, the review emphasizes that rational design in high-entropy electrocatalysis must shift from descriptive compositional screening toward active-state engineering across three interconnected stages: synthesis-stage regulation, postsynthetic modification, and operation-driven selection. During synthesis, manipulating element ratios, dopants, precursor reactivity, and support interactions biases initial motif distributions and faceting. Postsynthetically, controlled thermal annealing, plasma treatments, and selective chemical leaching can rewrite near-surface chemistry into porous frameworks or preconditioned compound shells. Finally, operation-driven levers, including potential cycling, pulsed activation protocols, and targeted electrolyte additives, steer the dynamic formation of robust, reaction-specific active motifs. By treating electrochemical reconstruction as a programmable transformation pathway rather than an uncontrolled failure mode, closed-loop frameworks linking controlled synthesis, operando diagnostics, and experimentally constrained machine learning can accelerate the development of durable, highly active multicomponent electrocatalysts.
Subject of Research: Electrochemical surface reconstruction mechanisms and active-state engineering in high-entropy materials
Article Title: Review on surface reconstruction in high-entropy electrocatalysts
Article References: Xue, Q., Mollania, H., He, R., Khan, M. D., Moghaddam, A. O., Yu, J., Arbiol, J., & Cabot, A. (2026). Review on surface reconstruction in high-entropy electrocatalysts. Journal of Materials Science. https://doi.org/10.1007/s10853-026-13847-w
Image Credits: AI Generated
DOI: 10.1007/s10853-026-13847-w
Keywords: high-entropy electrocatalysts, surface reconstruction, active-state engineering, electrochemical activation, compositional redistribution, chemical-state transformation, selective dissolution, operando characterization, quasi-in situ XPS, oxygen evolution reaction, multicomponent alloys, core-shell architectures, sluggish diffusion, machine learning interatomic potentials, chemical buffering, cluster expansion
News Source: Denise Maddox. (November 15, 2026). Review Outlines How Electrochemical Surface Reconstruction Defines High-Entropy Electrocatalyst Performance. Scienmag.



