A regional broadband ground motion simulation of the 1976 magnitude 7.6 Tangshan earthquake indicates that peak ground acceleration in the near-fault zone reached up to roughly twice the values predicted by empirical ground motion models for North China. The three-dimensional numerical simulation demonstrated that strong ground shaking formed an asymmetric high-value zone oriented along the fault line, driven by pronounced hanging wall and rupture directivity effects. On the hanging wall within the surface projection of the fault, modeled peak ground acceleration reached approximately 600 centimeters per second squared, while peak ground velocity attained about 150 centimeters per second. These results provide new quantitative reconstructions of ground motion fields across an active and high-hazard sector of the Beijing-Tianjin-Hebei region.
Characterizing the three-dimensional broadband ground motion spatiotemporal field across regional scales provides a critical foundation for engineering structure seismic design and urban earthquake disaster mitigation. To reconstruct realistic ground shaking scenarios, the researchers constructed a refined three-dimensional velocity structural model encompassing the Beijing-Tianjin-Hebei region, bounded by 116 degrees East to 119 degrees East longitude and 39 degrees North to 40.5 degrees North latitude.
To capture ground motions across both low and high frequencies, the authors developed a three-component broadband hybrid ground motion simulation methodology. Low-frequency ground shaking between 0.1 and 2 Hertz was computed using numerical simulations based on the spectral element method. For high frequencies spanning 2 to 10 Hertz, the methodology implemented a stochastic finite-fault source formulation. Within this high-frequency source term, the radiation pattern was modified specifically to capture three-dimensional rupture directivity effects, after which the low-frequency and high-frequency components were combined into unified three-component broadband ground motion time series.
The investigators calibrated the computational framework using recorded strong ground motions from the 2020 Guye moment magnitude 4.8 earthquake. By fitting the simulated motions to observational records, the team calibrated essential parameters of the stochastic finite-fault method, including the quality factor, the high-frequency attenuation parameter kappa, and the path duration. Comparing the simulated waveforms with the real earthquake records validated both the applicability of the regional three-dimensional velocity structural model parameters and the reliability of the hybrid simulation approach for the Beijing-Tianjin-Hebei region.
Following this validation step, the researchers established a kinematic source model for the catastrophic 1976 Tangshan moment magnitude 7.6 earthquake and simulated regional broadband ground shaking. The simulation generated comprehensive spatial distributions of peak ground acceleration, peak ground velocity, acceleration response spectra, and seismic intensity. Shaking intensity exhibited an asymmetric high-value zone oriented approximately northeast to southwest along the strike of the Tangshan fault. Shaking diminished outward from the fault projection, decreasing to peak ground accelerations between 50 and 100 centimeters per second squared and peak velocities between 30 and 60 centimeters per second across Tianjin, northern Tangshan, and the eastern periphery of Beijing.
The response spectra calculations also identified notable site amplification at a long period of 5 seconds at the Yanshan Mountains located north of Tianjin. Comparing the simulation outputs against existing empirical ground motion models for North China, the authors found that the modeled attenuation trend for peak ground acceleration agreed generally in the mid-field and far-field regions. In the near-fault zone, however, simulated peak ground accelerations reached up to approximately twice the levels estimated by empirical equations, an increase attributed primarily to near-fault effects and localized factors. These findings supply calibrated high-frequency stochastic parameters and reliable broadband ground motion simulations that help bridge the current deficit of broadband records in this seismically active region.
Subject of Research: Broadband ground motion simulation of the 1976 Tangshan earthquake
Article Title: Broadband ground motion simulation in the Beijing-Tianjin-Hebei region using an improved three-dimensional hybrid approach: The 1976 Tangshan Mw 7.6 earthquake
Article References: Ba, Z., Hu, Y., Zhao, J., Fu, Z., & Cheng, S. (2026). Broadband ground motion simulation in the Beijing-Tianjin-Hebei region using an improved three-dimensional hybrid approach: The 1976 Tangshan Mw 7.6 earthquake. Earthquake Engineering and Engineering Vibration, 25(4), 1171-1194. https://doi.org/10.1007/s11803-026-2427-8
Image Credits: AI Generated
DOI: 10.1007/s11803-026-2427-8
Keywords: Tangshan earthquake, ground motion simulation, Beijing-Tianjin-Hebei region, spectral element method, stochastic finite-fault method, peak ground acceleration, near-fault effects, seismology, Broadband, ground, motion, simulation
News Source: Violet Maxwell. (November 9, 2026). Hybrid Simulation Models Ground Motion for 1976 Tangshan Earthquake. Scienmag.



